Re: Performance, and how much wiggle room there is with tunables

[Robert Stanford <rstanford8896@xxxxxxxxx>]

 The bandwidth of the network is much higher than that.  The bandwidth I mentioned came from "rados bench" output, under the "Bandwidth (MB/sec)" row.  I see from comparing mine to others online that mine is pretty good (relatively).  But I'd like to get much more than that.

Does "rados bench" show a near maximum of what a cluster can do?  Or is it possible that I can tune it to get more bandwidth?




On Fri, Nov 10, 2017 at 3:43 AM, John Spray <jspray@xxxxxxxxxx> wrote:

On Fri, Nov 10, 2017 at 4:29 AM, Robert Stanford
<rstanford8896@xxxxxxxxx> wrote:
>
>  In my cluster, rados bench shows about 1GB/s bandwidth.  I've done some
> tuning:
>
> [osd]
> osd op threads = 8
> osd disk threads = 4
> osd recovery max active = 7
>
>
> I was hoping to get much better bandwidth.  My network can handle it, and my
> disks are pretty fast as well.  Are there any major tunables I can play with
> to increase what will be reported by "rados bench"?  Am I pretty much stuck
> around the bandwidth it reported?

Are you sure your 1GB/s isn't just the NIC bandwidth limit of the
client you're running rados bench from?

John

>
>  Thank you
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com