Re: Fwd: Luminous RadosGW issue

[Hans van den Bogert <hansbogert@xxxxxxxxx>]

On Nov 9, 2017, at 5:25 AM, Sam Huracan <nowitzki.sammy@xxxxxxxxx> wrote:

root@radosgw system]# ceph --admin-daemon /var/run/ceph/ceph-client.rgw.radosgw.asok config show | grep log_file
    "log_file": "/var/log/ceph/ceph-client.rgw.radosgw.log”,

The .asok filename resembles what should be used in your config. If Im right you should use ‘client.rgw.radosgw’ in your ceph.conf.

On Nov 9, 2017, at 5:25 AM, Sam Huracan <nowitzki.sammy@xxxxxxxxx> wrote:

@Hans: Yes, I tried to redeploy RGW, and ensure client.radosgw.gateway is the same in ceph.conf.

Everything go well, service radosgw running, port 7480 is opened, but all my config of radosgw in ceph.conf can't be set, rgw_dns_name is still empty, and log file keeps default value.

[root@radosgw system]# ceph --admin-daemon /var/run/ceph/ceph-client.rgw.radosgw.asok config show | grep log_file

    "log_file": "/var/log/ceph/ceph-client.rgw.radosgw.log",

[root@radosgw system]# cat /etc/ceph/ceph.client.radosgw.keyring 

[client.radosgw.gateway]

        key = AQCsywNaqQdDHxAAC24O8CJ0A9Gn6qeiPalEYg==

        caps mon = "allow rwx"

        caps osd = "allow rwx"

2017-11-09 6:11 GMT+07:00 Hans van den Bogert <hansbogert@xxxxxxxxx>:

Are you sure you deployed it with the client.radosgw.gateway name as
well? Try to redeploy the RGW and make sure the name you give it
corresponds to the name you give in the ceph.conf. Also, do not forget
to push the ceph.conf to the RGW machine.

On Wed, Nov 8, 2017 at 11:44 PM, Sam Huracan <nowitzki.sammy@xxxxxxxxx> wrote:
>
>
> Hi Cephers,
>
> I'm testing RadosGW in Luminous version.  I've already installed done in separate host, service is running but RadosGW did not accept any my configuration in ceph.conf.
>
> My Config:
> [client.radosgw.gateway]
> host = radosgw
> keyring = /etc/ceph/ceph.client.radosgw.keyring
> rgw socket path = /var/run/ceph/ceph.radosgw.gateway.fastcgi.sock
> log file = /var/log/radosgw/client.radosgw.gateway.log
> rgw dns name = radosgw.demo.com
> rgw print continue = false
>
>
> When I show config of radosgw socket:
> [root@radosgw ~]# ceph --admin-daemon /var/run/ceph/ceph-client.rgw.radosgw.asok config show | grep dns
>     "mon_dns_srv_name": "",
>     "rgw_dns_name": "",
>     "rgw_dns_s3website_name": "",
>
> rgw_dns_name is empty, hence S3 API is unable to access Ceph Object Storage.
>
>
> Do anyone meet this issue?
>
> My ceph version I'm  using is ceph-radosgw-12.2.1-0.el7.x86_64
>
> Thanks in advance
>
>

> _______________________________________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com