How to set local gid option ? I have no glue :) Gerhard W. Recher net4sec UG (haftungsbeschränkt) Leitenweg 6 86929 Penzing +49 171 4802507 Am 27.09.2017 um 15:59 schrieb Haomai Wang: > do you set local gid option? > > On Wed, Sep 27, 2017 at 9:52 PM, Gerhard W. Recher > <gerhard.recher@xxxxxxxxxxx> wrote: >> Yep ROcE .... >> >> i followed up all recommendations in mellanox papers ... >> >> */etc/security/limits.conf* >> >> * soft memlock unlimited >> * hard memlock unlimited >> root soft memlock unlimited >> root hard memlock unlimited >> >> >> also set properties on daemons (chapter 11) in >> https://community.mellanox.com/docs/DOC-2721 >> >> >> only gids parameter in ceph.conf is no way in proxmox, because >> cephp.conf is for all storage node the same file >> root@pve01:/etc/ceph# ls -latr >> total 16 >> lrwxrwxrwx 1 root root 18 Jun 21 19:35 ceph.conf -> /etc/pve/ceph.conf >> >> and each node has uniqe GIDS..... >> >> >> ./showgids >> DEV PORT INDEX GID >> IPv4 VER DEV >> --- ---- ----- --- >> ------------ --- --- >> mlx4_0 1 0 >> fe80:0000:0000:0000:268a:07ff:fee2:6070 v1 ens1 >> mlx4_0 1 1 >> fe80:0000:0000:0000:268a:07ff:fee2:6070 v2 ens1 >> mlx4_0 1 2 0000:0000:0000:0000:0000:ffff:c0a8:dd8d >> 192.168.221.141 v1 vmbr0 >> mlx4_0 1 3 0000:0000:0000:0000:0000:ffff:c0a8:dd8d >> 192.168.221.141 v2 vmbr0 >> mlx4_0 2 0 >> fe80:0000:0000:0000:268a:07ff:fee2:6071 v1 ens1d1 >> mlx4_0 2 1 >> fe80:0000:0000:0000:268a:07ff:fee2:6071 v2 ens1d1 >> mlx4_0 2 2 0000:0000:0000:0000:0000:ffff:c0a8:648d >> 192.168.100.141 v1 ens1d1 >> mlx4_0 2 3 0000:0000:0000:0000:0000:ffff:c0a8:648d >> 192.168.100.141 v2 ens1d1 >> n_gids_found=8 >> >> next node ... showgids >> ./showgids >> DEV PORT INDEX GID >> IPv4 VER DEV >> --- ---- ----- --- >> ------------ --- --- >> mlx4_0 1 0 >> fe80:0000:0000:0000:268a:07ff:fef9:8730 v1 ens1 >> mlx4_0 1 1 >> fe80:0000:0000:0000:268a:07ff:fef9:8730 v2 ens1 >> mlx4_0 1 2 0000:0000:0000:0000:0000:ffff:c0a8:dd8e >> 192.168.221.142 v1 vmbr0 >> mlx4_0 1 3 0000:0000:0000:0000:0000:ffff:c0a8:dd8e >> 192.168.221.142 v2 vmbr0 >> mlx4_0 2 0 >> fe80:0000:0000:0000:268a:07ff:fef9:8731 v1 ens1d1 >> mlx4_0 2 1 >> fe80:0000:0000:0000:268a:07ff:fef9:8731 v2 ens1d1 >> mlx4_0 2 2 0000:0000:0000:0000:0000:ffff:c0a8:648e >> 192.168.100.142 v1 ens1d1 >> mlx4_0 2 3 0000:0000:0000:0000:0000:ffff:c0a8:648e >> 192.168.100.142 v2 ens1d1 >> n_gids_found=8 >> >> >> >> ifconfig ens1d1 >> ens1d1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 9000 >> inet 192.168.100.141 netmask 255.255.255.0 broadcast >> 192.168.100.255 >> inet6 fe80::268a:7ff:fee2:6071 prefixlen 64 scopeid 0x20<link> >> ether 24:8a:07:e2:60:71 txqueuelen 1000 (Ethernet) >> RX packets 25450717 bytes 39981352146 (37.2 GiB) >> RX errors 0 dropped 77 overruns 77 frame 0 >> TX packets 26554236 bytes 53419159091 (49.7 GiB) >> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> >> >> Gerhard W. Recher >> >> net4sec UG (haftungsbeschränkt) >> Leitenweg 6 >> 86929 Penzing >> >> +49 171 4802507 >> Am 27.09.2017 um 14:50 schrieb Haomai Wang: >>> On Wed, Sep 27, 2017 at 8:33 PM, Gerhard W. Recher >>> <gerhard.recher@xxxxxxxxxxx> wrote: >>>> Hi Folks! >>>> >>>> I'm totally stuck >>>> >>>> rdma is running on my nics, rping udaddy etc will give positive results. >>>> >>>> cluster consist of: >>>> proxmox-ve: 5.0-23 (running kernel: 4.10.17-3-pve) >>>> pve-manager: 5.0-32 (running version: 5.0-32/2560e073) >>>> >>>> system(4 nodes): Supermicro 2028U-TN24R4T+ >>>> >>>> 2 port Mellanox connect x3pro 56Gbit >>>> 4 port intel 10GigE >>>> memory: 768 GBytes >>>> CPU DUAL Intel(R) Xeon(R) CPU E5-2690 v4 @ 2.60GHz >>>> >>>> ceph: 28 osds >>>> 24 Intel Nvme 2000GB Intel SSD DC P3520, 2,5", PCIe 3.0 x4, >>>> 4 Intel Nvme 1,6TB Intel SSD DC P3700, 2,5", U.2 PCIe 3.0 >>>> >>>> >>>> ceph is running on bluestore, engaging rdma within ceph (version >>>> 12.2.0-pve1) will lead into this crash >>>> >>>> >>>> ceph.conf: >>>> [global] >>>> ms_type=async+rdma >>>> ms_cluster_type = async+rdma >>>> ms_async_rdma_port_num=2 >>> I guess it should be 0. what's your result of "ibstat" >>> >>>> ms_async_rdma_device_name=mlx4_0 >>>> ... >>>> >>>> >>>> >>>> -- Reboot -- >>>> Sep 26 18:56:10 pve02 systemd[1]: Started Ceph cluster manager daemon. >>>> Sep 26 18:56:10 pve02 systemd[1]: Reached target ceph target allowing to start/stop all ceph-mgr@.service instances at once. >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 2017-09-26 18:56:10.427474 7f0e2137e700 -1 Infiniband binding_port port not found >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: /home/builder/source/ceph-12.2.0/src/msg/async/rdma/Infiniband.cc: In function 'void Device::binding_port(CephContext*, int)' thread 7f0e2137e700 time 2017-09-26 18:56:10.427498 >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: /home/builder/source/ceph-12.2.0/src/msg/async/rdma/Infiniband.cc: 144: FAILED assert(active_port) >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: ceph version 12.2.0 (36f6c5ea099d43087ff0276121fd34e71668ae0e) luminous (rc) >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 1: (ceph::__ceph_assert_fail(char const*, char const*, int, char const*)+0x102) [0x55e9dde4bd12] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 2: (Device::binding_port(CephContext*, int)+0x573) [0x55e9de1b2c33] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 3: (Infiniband::init()+0x15f) [0x55e9de1b8f1f] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 4: (RDMAWorker::connect(entity_addr_t const&, SocketOptions const&, ConnectedSocket*)+0x4c) [0x55e9ddf2329c] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 5: (AsyncConnection::_process_connection()+0x446) [0x55e9de1a6d86] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 6: (AsyncConnection::process()+0x7f8) [0x55e9de1ac328] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 7: (EventCenter::process_events(int, std::chrono::duration<unsigned long, std::ratio<1l, 1000000000l> >*)+0x1125) [0x55e9ddf198a5] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 8: (()+0x4c9288) [0x55e9ddf1d288] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 9: (()+0xb9e6f) [0x7f0e259d4e6f] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 10: (()+0x7494) [0x7f0e260d1494] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: 11: (clone()+0x3f) [0x7f0e25149aff] >>>> Sep 26 18:56:10 pve02 ceph-mgr[2233]: NOTE: a copy of the executable, or `objdump -rdS <executable>` is needed to interpret this. >>>> >>>> >>>> any advice ? >>>> >>>> >>>> -- >>>> Gerhard W. Recher >>>> >>>> net4sec UG (haftungsbeschränkt) >>>> Leitenweg 6 >>>> 86929 Penzing >>>> >>>> +49 171 4802507 >>>> >>>> >>>> _______________________________________________ >>>> ceph-users mailing list >>>> ceph-users@xxxxxxxxxxxxxx >>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >>>> >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@xxxxxxxxxxxxxx >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >>
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
