Hi, To my understand, the bluestore write workflow is For normal big write 1. Write data to block 2. Update metadata to rocksdb 3. Rocksdb write to memory and block.wal 4. Once reach threshold, flush entries in block.wal to block.db For overwrite and small write 1. Write data and metadata to rocksdb 2. Apply the data to block Seems we don’t have a formula or suggestion to the size of block.db. It depends on the object size and number of objects in your pool. You can just give big partition to block.db to ensure all the database files are on that fast partition. If block.db full, it will use block to put db files, however, this will slow down the db performance. So give db size as much as you can. If you want to put wal and db on same ssd, you don’t need to create block.wal. It will implicitly use block.db to put wal. The only case you need block.wal is that you want to separate wal to another disk. I’m also studying bluestore, this is what I know so far. Any correction is welcomed. Thanks > On Sep 22, 2017, at 5:27 PM, Richard Hesketh <richard.hesketh@xxxxxxxxxxxx> wrote: > > I asked the same question a couple of weeks ago. No response I got contradicted the documentation but nobody actively confirmed the documentation was correct on this subject, either; my end state was that I was relatively confident I wasn't making some horrible mistake by simply specifying a big DB partition and letting bluestore work itself out (in my case, I've just got HDDs and SSDs that were journals under filestore), but I could not be sure there wasn't some sort of performance tuning I was missing out on by not specifying them separately. > > Rich > > On 21/09/17 20:37, Benjeman Meekhof wrote: >> Some of this thread seems to contradict the documentation and confuses >> me. Is the statement below correct? >> >> "The BlueStore journal will always be placed on the fastest device >> available, so using a DB device will provide the same benefit that the >> WAL device would while also allowing additional metadata to be stored >> there (if it will fix)." >> >> http://docs.ceph.com/docs/master/rados/configuration/bluestore-config-ref/#devices >> >> it seems to be saying that there's no reason to create separate WAL >> and DB partitions if they are on the same device. Specifying one >> large DB partition per OSD will cover both uses. >> >> thanks, >> Ben >> >> On Thu, Sep 21, 2017 at 12:15 PM, Dietmar Rieder >> <dietmar.rieder@xxxxxxxxxxx> wrote: >>> On 09/21/2017 05:03 PM, Mark Nelson wrote: >>>> >>>> On 09/21/2017 03:17 AM, Dietmar Rieder wrote: >>>>> On 09/21/2017 09:45 AM, Maged Mokhtar wrote: >>>>>> On 2017-09-21 07:56, Lazuardi Nasution wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I'm still looking for the answer of these questions. Maybe someone can >>>>>>> share their thought on these. Any comment will be helpful too. >>>>>>> >>>>>>> Best regards, >>>>>>> >>>>>>> On Sat, Sep 16, 2017 at 1:39 AM, Lazuardi Nasution >>>>>>> <mrxlazuardin@xxxxxxxxx <mailto:mrxlazuardin@xxxxxxxxx>> wrote: >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> 1. Is it possible configure use osd_data not as small partition on >>>>>>> OSD but a folder (ex. on root disk)? If yes, how to do that with >>>>>>> ceph-disk and any pros/cons of doing that? >>>>>>> 2. Is WAL & DB size calculated based on OSD size or expected >>>>>>> throughput like on journal device of filestore? If no, what is the >>>>>>> default value and pro/cons of adjusting that? >>>>>>> 3. Is partition alignment matter on Bluestore, including WAL & DB >>>>>>> if using separate device for them? >>>>>>> >>>>>>> Best regards, >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> ceph-users mailing list >>>>>>> ceph-users@xxxxxxxxxxxxxx <mailto:ceph-users@xxxxxxxxxxxxxx> >>>>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >>>>>> >>>>>> >>>>>> I am also looking for recommendations on wal/db partition sizes. Some >>>>>> hints: >>>>>> >>>>>> ceph-disk defaults used in case it does not find >>>>>> bluestore_block_wal_size or bluestore_block_db_size in config file: >>>>>> >>>>>> wal = 512MB >>>>>> >>>>>> db = if bluestore_block_size (data size) is in config file it uses 1/100 >>>>>> of it else it uses 1G. >>>>>> >>>>>> There is also a presentation by Sage back in March, see page 16: >>>>>> >>>>>> https://www.slideshare.net/sageweil1/bluestore-a-new-storage-backend-for-ceph-one-year-in >>>>>> >>>>>> >>>>>> wal: 512 MB >>>>>> >>>>>> db: "a few" GB >>>>>> >>>>>> the wal size is probably not debatable, it will be like a journal for >>>>>> small block sizes which are constrained by iops hence 512 MB is more >>>>>> than enough. Probably we will see more on the db size in the future. >>>>> This is what I understood so far. >>>>> I wonder if it makes sense to set the db size as big as possible and >>>>> divide entire db device is by the number of OSDs it will serve. >>>>> >>>>> E.g. 10 OSDs / 1 NVME (800GB) >>>>> >>>>> (800GB - 10x1GB wal ) / 10 = ~79Gb db size per OSD >>>>> >>>>> Is this smart/stupid? >>>> Personally I'd use 512MB-2GB for the WAL (larger buffers reduce write >>>> amp but mean larger memtables and potentially higher overhead scanning >>>> through memtables). 4x256MB buffers works pretty well, but it means >>>> memory overhead too. Beyond that, I'd devote the entire rest of the >>>> device to DB partitions. >>>> >>> thanks for your suggestion Mark! >>> >>> So, just to make sure I understood this right: >>> >>> You'd use a separeate 512MB-2GB WAL partition for each OSD and the >>> entire rest for DB partitions. >>> >>> In the example case with 10xHDD OSD and 1 NVME it would then be 10 WAL >>> partitions with each 512MB-2GB and 10 equal sized DB partitions >>> consuming the rest of the NVME. >>> >>> >>> Thanks >>> Dietmar >>> -- >>> _________________________________________ >>> D i e t m a r R i e d e r, Mag.Dr. >>> Innsbruck Medical University >>> Biocenter - Division for Bioinformatics >>> >>> >>> >>> _______________________________________________ >>> ceph-users mailing list >>> ceph-users@xxxxxxxxxxxxxx >>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >>> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@xxxxxxxxxxxxxx >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |