I see the following which is most likely the issue: 2017-09-11 22:26:38.945776 7efd677fe700 -1 librbd::managed_lock::BreakRequest: 0x7efd58020e70 handle_blacklist: failed to blacklist lock owner: (13) Permission denied 2017-09-11 22:26:38.945795 7efd677fe700 10 librbd::managed_lock::BreakRequest: 0x7efd58020e70 finish: r=-13 2017-09-11 22:26:38.945798 7efd677fe700 10 librbd::managed_lock::AcquireRequest: 0x7efd60017960 handle_break_lock: r=-13 2017-09-11 22:26:38.945800 7efd677fe700 -1 librbd::managed_lock::AcquireRequest: 0x7efd60017960 handle_break_lock: failed to break lock : (13) Permission denied 2017-09-11 22:26:38.945865 7efd677fe700 10 librbd::ManagedLock: 0x7efd580267d0 handle_acquire_lock: r=-13 2017-09-11 22:26:38.945873 7efd677fe700 -1 librbd::ManagedLock: 0x7efd580267d0 handle_acquire_lock: failed to acquire exclusive lock:(13) Permission denied 2017-09-11 22:26:38.945883 7efd677fe700 10 librbd::ExclusiveLock: 0x7efd580267d0 post_acquire_lock_handler: r=-13 2017-09-11 22:26:38.945887 7efd677fe700 10 librbd::ImageState: 0x55b55ace8dc0 handle_prepare_lock_complete 2017-09-11 22:26:38.945892 7efd677fe700 10 librbd::ManagedLock: 0x7efd580267d0 handle_post_acquire_lock: r=-13 2017-09-11 22:26:38.945895 7efd677fe700 5 librbd::io::ImageRequestWQ: 0x55b55ace9a20 handle_acquire_lock: r=-13, req=0x55b55add32a0 2017-09-11 22:26:38.945901 7efd677fe700 -1 librbd::io::AioCompletion: 0x55b55add46a0 fail: (13) Permission denied It looks like your "client.libvirt" user lacks the permission to blacklist a dead client that had previously acquired the exclusive lock and failed to release it. Can you provide the results from "ceph auth get client.libvirt"? I suspect it only has 'caps mon = "allow r"'. On Mon, Sep 11, 2017 at 4:45 PM, Nico Schottelius <nico.schottelius@xxxxxxxxxxx> wrote: > > > Thanks a lot for the great ceph.conf pointer, Mykola! > > I found something interesting: > > 2017-09-11 22:26:23.418796 7efd7d479700 10 client.1039597.objecter ms_dispatch 0x55b55ab8f950 osd_op_reply(4 rbd_header.df7343d1b58ba [call] v0'0 uv0 ondisk = -8 ((8) Exec format error)) v8 > 2017-09-11 22:26:23.439501 7efd7dc7a700 10 client.1039597.objecter > ms_dispatch 0x55b55ab8f950 osd_op_reply(14 rbd_header.2b0c02ae8944a > [call] v0'0 uv0 ondisk = -8 ((8) Exec format error)) v8 > > Not sure if those are the ones causing the problem, but at least some > error. > > I have uploaded the log at > http://www.nico.schottelius.org/ceph.client.libvirt.41670.log.bz2 > > I wonder if anyone sees the real reason for the I/O errors in the log? > > Best, > > Nico > >> Mykola Golub <mgolub@xxxxxxxxxxxx> writes: >> >>> On Sun, Sep 10, 2017 at 03:56:21PM +0200, Nico Schottelius wrote: >>>> >>>> Just tried and there is not much more log in ceph -w (see below) neither >>>> from the qemu process. >>>> >>>> [15:52:43] server4:~$ /usr/bin/qemu-system-x86_64 -name one-17031 -S >>>> -machine pc-i440fx-2.1,accel=kvm,usb=off -m 8192 -realtime mlock=off >>>> -smp 6,sockets=6,cores=1,threads=1 -uuid >>>> 79845fca-9b26-4072-bcb3-7f5206c2a531 -no-user-config -nodefaults >>>> -chardev >>>> socket,id=charmonitor,path=/var/lib/libvirt/qemu/one-17031.monitor,server,nowait >>>> -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc >>>> -no-shutdown -boot strict=on -device >>>> piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive >>>> file='rbd:one/one-29-17031-0:id=libvirt:key=DELETEME:auth_supported=cephx\;none:mon_host=server1\:6789\;server3\:6789\;server5\:6789,if=none,id=drive-virtio-disk0,format=raw,cache=none' -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -drive file=/var/lib/one//datastores/100/17031/disk.1,if=none,id=drive-ide0-0-0,readonly=on,format=raw -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -vnc [::]:21131 -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 -msg timestamp=on 2>&1 | tee kvmlogwithdebug >>>> >>>> -> no output >>> >>> Try to find where the qemu process writes the ceph log, e.g. with the >>> help of lsof utility. Or add something like below >>> >>> log file = /tmp/ceph.$name.$pid.log >>> >>> to ceph.conf before starting qemu and look for /tmp/ceph.*.log > > > -- > Modern, affordable, Swiss Virtual Machines. Visit www.datacenterlight.ch -- Jason _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |