> Op 17 juli 2017 om 17:03 schreef gencer@xxxxxxxxxxxxx: > > > I used this methods: > > $ ceph-deploy osd prepare sr-09-01-18:/dev/sdb1 sr-10-01-18:/dev/sdb1 .... (one from 09th server one from 10th server..) > > and then; > > $ ceph-deploy osd activate sr-09-01-18:/dev/sdb1 sr-10-01-18:/dev/sdb1 ... > You should use a whole disk, not a partition. So /dev/sdb without the '1' at the end. > This is my second creation for ceph cluster. At first I used bluestore. This time i did not use bluestore (also removed from conf file). Still seen as 200GB. > > How can I make sure BlueStore is disabled (even if i not put any command). > Just use BlueStore with Luminous as all testing is welcome! But in this case you invoked the command with the wrong parameters. Wido > -Gencer. > > -----Original Message----- > From: Wido den Hollander [mailto:wido@xxxxxxxx] > Sent: Monday, July 17, 2017 5:57 PM > To: ceph-users@xxxxxxxxxxxxxx; gencer@xxxxxxxxxxxxx > Subject: RE: Ceph (Luminous) shows total_space wrong > > > > Op 17 juli 2017 om 16:41 schreef gencer@xxxxxxxxxxxxx: > > > > > > Hi Wido, > > > > Each disk is 3TB SATA (2.8TB seen) but what I got is this: > > > > First let me gave you df -h: > > > > /dev/sdb1 2.8T 754M 2.8T 1% /var/lib/ceph/osd/ceph-0 > > /dev/sdc1 2.8T 753M 2.8T 1% /var/lib/ceph/osd/ceph-2 > > /dev/sdd1 2.8T 752M 2.8T 1% /var/lib/ceph/osd/ceph-4 > > /dev/sde1 2.8T 752M 2.8T 1% /var/lib/ceph/osd/ceph-6 > > /dev/sdf1 2.8T 753M 2.8T 1% /var/lib/ceph/osd/ceph-8 > > /dev/sdg1 2.8T 752M 2.8T 1% /var/lib/ceph/osd/ceph-10 > > /dev/sdh1 2.8T 751M 2.8T 1% /var/lib/ceph/osd/ceph-12 > > /dev/sdi1 2.8T 751M 2.8T 1% /var/lib/ceph/osd/ceph-14 > > /dev/sdj1 2.8T 751M 2.8T 1% /var/lib/ceph/osd/ceph-16 > > /dev/sdk1 2.8T 751M 2.8T 1% /var/lib/ceph/osd/ceph-18 > > > > > > Then here is my results from ceph df commands: > > > > ceph df > > > > GLOBAL: > > SIZE AVAIL RAW USED %RAW USED > > 200G 179G 21381M 10.44 > > POOLS: > > NAME ID USED %USED MAX AVAIL OBJECTS > > rbd 0 0 0 86579M 0 > > cephfs_data 1 0 0 86579M 0 > > cephfs_metadata 2 2488 0 86579M 21 > > > > Ok, that's odd. But I think these disks are using BlueStore since that's what Luminous defaults to. > > The partitions seem to be mixed up, so can you check on how you created the OSDs? Was that with ceph-disk? If so, what additional arguments did you use? > > Wido > > > ceph osd df > > ID WEIGHT REWEIGHT SIZE USE AVAIL %USE VAR PGS > > 0 0.00980 1.00000 10240M 1070M 9170M 10.45 1.00 173 > > 2 0.00980 1.00000 10240M 1069M 9170M 10.45 1.00 150 > > 4 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 148 > > 6 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 167 > > 8 0.00980 1.00000 10240M 1069M 9171M 10.44 1.00 166 > > 10 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 171 > > 12 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 160 > > 14 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 179 > > 16 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 182 > > 18 0.00980 1.00000 10240M 1069M 9170M 10.44 1.00 168 > > 1 0.00980 1.00000 10240M 1069M 9170M 10.45 1.00 167 > > 3 0.00980 1.00000 10240M 1069M 9170M 10.45 1.00 156 > > 5 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 152 > > 7 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 158 > > 9 0.00980 1.00000 10240M 1069M 9170M 10.44 1.00 174 > > 11 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 153 > > 13 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 179 > > 15 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 186 > > 17 0.00980 1.00000 10240M 1068M 9171M 10.44 1.00 185 > > 19 0.00980 1.00000 10240M 1067M 9172M 10.43 1.00 154 > > TOTAL 200G 21381M 179G 10.44 > > MIN/MAX VAR: 1.00/1.00 STDDEV: 0.00 > > > > > > -Gencer. > > > > -----Original Message----- > > From: Wido den Hollander [mailto:wido@xxxxxxxx] > > Sent: Monday, July 17, 2017 4:57 PM > > To: ceph-users@xxxxxxxxxxxxxx; gencer@xxxxxxxxxxxxx > > Subject: Re: Ceph (Luminous) shows total_space wrong > > > > > > > Op 17 juli 2017 om 15:49 schreef gencer@xxxxxxxxxxxxx: > > > > > > > > > Hi, > > > > > > > > > > > > I successfully managed to work with ceph jewel. Want to try luminous. > > > > > > > > > > > > I also set experimental bluestore while creating osds. Problem is, I > > > have 20x3TB hdd in two nodes and i would expect 55TB usable (as on > > > jewel) on luminous but i see 200GB. Ceph thinks I have only 200GB > > > space available in total. I see all osds are up and in. > > > > > > > > > > > > 20 osd up; 20 osd in. 0 down. > > > > > > > > > > > > Ceph -s shows HEALTH_OK. I have only one monitor and one mds. > > > (1/1/1) and it is up:active. > > > > > > > > > > > > ceph osd tree gave me all OSDs in nodes are up and results are > > > 1.0000... I checked via df -h but all disks ahows 2.7TB. Basically something is wrong. > > > Same settings and followed schema on jewel is successful except luminous. > > > > > > > What do these commands show: > > > > - ceph df > > - ceph osd df > > > > Might be that you are looking at the wrong numbers. > > > > Wido > > > > > > > > > > > What might it be? > > > > > > > > > > > > What do you need to know to solve this problem? Why ceph thinks I > > > have 200GB space only? > > > > > > > > > > > > Thanks, > > > > > > Gencer. > > > > > > _______________________________________________ > > > ceph-users mailing list > > > ceph-users@xxxxxxxxxxxxxx > > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |