David, ceph tell osd.12 version replies version 11.2.0 Distro is Ubuntu 14.04.5 LTS (trusty) which utilizes upstart for ceph. I don’t see a good way ensure last in an event based system like upstart. For the record I already tried after networking and after filesystems are mounted to and that didn’t seem to help things. I would probably just make it start last in the boot order. Depending on your distribution/version, that will be as simple as setting it to 99 for starting up. Which distribution/version are you running? David, I get what you are saying. Do you have a suggestion as to what service I make ceph-osd depend on to reliable start? My understanding is that these daemons should all be sort of independent of each other. -Zach Have you attempted to place the ceph-osd startup later in the boot process. Which distribution/version are you running? Each does it slightly different. This can be problematic for some services, very commonly in cases where a network drive is mapped and used by a service like mysql (terrible example, but effective). If you try to start mysql before the network is up and the drive is mapped, then mysql will fail. Some work arounds are to put a sleep in the init script, or retry (similar to what you did), but ultimately, you probably want to set a requisite service to have started or just place the service in a later starting position. System: Ubuntu Trusty 14.04
Release : Kraken
Issue:
When starting ceph-osd daemon on boot via upstart. Error message in /var/log/upstart/ceph-osd-ceph_#.log reports 3 attempt to start the service with the errors message below
starting osd.12 at - osd_data /var/lib/ceph/osd/ceph-12 /var/lib/ceph/osd/ceph-12/journal
2017-05-09 13:38:34.507004 7f6d46a2e980 -1 journal FileJournal::_open: disabling aio for non-block journal. Use journal_force_aio to force use of aio anyway
2017-05-09 13:38:38.432333 7f6d46a2e980 -1 osd.12 2284024 PGs are upgrading
unable to look up group 'ceph': (34) Numerical result out of range
unable to look up group 'ceph': (34) Numerical result out of range
unable to look up group 'ceph': (34) Numerical result out of range
Workaround:
If I configure /etc/init/ceph-osd.conf like so
-respawn limit 3 1800
+respawn limit unlimited
I get roughly 20 attempts to start the each osd daemon and then it successfully starts.
Starting the daemons by hand works just fine after boot.
Possible reasons:
NSCD is being utilized and may not have started yet. However disabling this service doesn’t not improve starting the service without the workaround in place.
The message seems to be coming global/global_init.cc
./global/global_init.cc- struct passwd *p = 0;
./global/global_init.cc- getpwnam_r(g_conf->setuser.c_str(), &pa, buf, sizeof(buf), &p);
./global/global_init.cc- if (!p) {
./global/global_init.cc- cerr << "unable to look up user '" << g_conf->setuser << "'"
./global/global_init.cc- << std::endl;
./global/global_init.cc- exit(1);
./global/global_init.cc- }
./global/global_init.cc- uid = p->pw_uid;
./global/global_init.cc- gid = p->pw_gid;
./global/global_init.cc- uid_string = g_conf->setuser;
./global/global_init.cc- }
./global/global_init.cc- }
./global/global_init.cc- if (g_conf->setgroup.length() > 0) {
./global/global_init.cc- gid = atoi(g_conf->setgroup.c_str());
./global/global_init.cc- if (!gid) {
./global/global_init.cc- char buf[4096];
./global/global_init.cc- struct group gr;
./global/global_init.cc- struct group *g = 0;
./global/global_init.cc- getgrnam_r(g_conf->setgroup.c_str(), &gr, buf, sizeof(buf), &g);
./global/global_init.cc- if (!g) {
./global/global_init.cc: cerr << "unable to look up group '" << g_conf->setgroup << "'"
./global/global_init.cc- << ": " << cpp_strerror(errno) << std::endl;
./global/global_init.cc- exit(1);
./global/global_init.cc- }
./global/global_init.cc- gid = g->gr_gid;
./global/global_init.cc- gid_string = g_conf->setgroup;
./global/global_init.cc- }
./global/global_init.cc- }
34 as an error code seems to correspond to ERANGE Insufficient buffer space supplied. I assume this is because getgrnam_r() returns NULL if it can’t find the group.
But as to why the group isn’t retrievable I have no idea, As
getent group ceph
ceph:x:59623:ceph
GID changed for security reasons.
Additional Information:
I also see this in boot.log not sure if it is related
failed: 'ulimit -n 32768; /usr/bin/ceph-mds -i cephstorelx2 --pid-file /var/run/ceph/mds.cephstorelx2//mds.cephstorelx2.pid -c /etc/ceph/ceph.conf --cluster ceph --setuser ceph --setgroup ceph '
Any pointers would be helpful.
-Zach
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
|
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
