Re: RGW 10.2.5->10.2.7 authentication fail?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ben,

On Mon, Apr 24, 2017 at 4:36 PM, Ben Morrice <ben.morrice@xxxxxxx> wrote:
> Hello Orit,
>
> Could it be that something has changed in 10.2.5+ which is related to
> reading the endpoints from the zone/period config?
>

I don't remember any change for endpoints config, but I will go over
the changes to make sure.
There were a few changes with tenant handling that may cause this regression.


> In my master zone I have specified the endpoint with a trailing backslash
> (which is also escaped), however I do not define the secondary endpoint this
> way. Am I hitting a bug here?
>

Can you update the secondary endpoint and see if it helps?

Please open a bug in tracker with regarding to this issue.
Regards,
Orit

> Kind regards,
>
> Ben Morrice
>
> ______________________________________________________________________
> Ben Morrice | e: ben.morrice@xxxxxxx | t: +41-21-693-9670
> EPFL / BBP
> Biotech Campus
> Chemin des Mines 9
> 1202 Geneva
> Switzerland
>
> On 21/04/17 09:36, Ben Morrice wrote:
>>
>> Hello Orit,
>>
>> Please find attached the output from the radosgw commands and the relevant
>> section from ceph.conf (radosgw)
>>
>> bbp-gva-master is running 10.2.5
>>
>> bbp-gva-secondary is running 10.2.7
>>
>> Kind regards,
>>
>> Ben Morrice
>>
>> ______________________________________________________________________
>> Ben Morrice | e: ben.morrice@xxxxxxx | t: +41-21-693-9670
>> EPFL / BBP
>> Biotech Campus
>> Chemin des Mines 9
>> 1202 Geneva
>> Switzerland
>>
>> On 21/04/17 07:55, Orit Wasserman wrote:
>>>
>>> Hi Ben,
>>>
>>> On Thu, Apr 20, 2017 at 6:08 PM, Ben Morrice <ben.morrice@xxxxxxx> wrote:
>>>>
>>>> Hi all,
>>>>
>>>> I have tried upgrading one of our RGW servers from 10.2.5 to 10.2.7
>>>> (RHEL7)
>>>> and authentication is in a very bad state. This installation is part of
>>>> a
>>>> multigw configuration, and I have just updated one host in the secondary
>>>> zone (all other hosts/zones are running 10.2.5).
>>>>
>>>> On the 10.2.7 server I cannot authenticate as a user (normally backed by
>>>> OpenStack Keystone), but even worse I can also not authenticate with an
>>>> admin user.
>>>>
>>>> Please see [1] for the results of performing a list bucket operation
>>>> with
>>>> python boto (script works against rgw 10.2.5)
>>>>
>>>> Also, if I try to authenticate from the 'master' rgw zone with a
>>>> "radosgw-admin sync status --rgw-zone=bbp-gva-master" I get:
>>>>
>>>> "ERROR: failed to fetch datalog info"
>>>>
>>>> "failed to retrieve sync info: (13) Permission denied"
>>>>
>>>> The above errors correlates to the errors in the log on the server
>>>> running
>>>> 10.2.7 (debug level 20) at [2]
>>>>
>>>> I'm not sure what I have done wrong or can try next?
>>>>
>>>> By the way, downgrading the packages from 10.2.7 to 10.2.5 returns
>>>> authentication functionality
>>>
>>> Can you provide the following info:
>>> radosgw-admin period get
>>> radsogw-admin zonegroup get
>>> radsogw-admin zone get
>>>
>>> Can you provide your ceph.conf?
>>>
>>> Thanks,
>>> Orit
>>>
>>>> [1]
>>>> boto.exception.S3ResponseError: S3ResponseError: 403 Forbidden
>>>> <?xml version="1.0"
>>>>
>>>> encoding="UTF-8"?><Error><Code>SignatureDoesNotMatch</Code><RequestId>tx000000000000000000004-0058f8c86a-3fa2959-bbp-gva-secondary</RequestId><HostId>3fa2959-bbp-gva-secondary-bbp-gva</HostId></Error>
>>>>
>>>> [2]
>>>> /bbpsrvc15.cscs.ch/admin/log
>>>> 2017-04-20 16:43:04.916253 7ff87c6c0700 15 calculated
>>>> digest=Ofg/f/NI0L4eEG1MsGk4PsVscTM=
>>>> 2017-04-20 16:43:04.916255 7ff87c6c0700 15
>>>> auth_sign=qZ3qsy7AuNCOoPMhr8yNoy5qMKU=
>>>> 2017-04-20 16:43:04.916255 7ff87c6c0700 15 compare=34
>>>> 2017-04-20 16:43:04.916266 7ff87c6c0700 10 failed to authorize request
>>>> 2017-04-20 16:43:04.916268 7ff87c6c0700 20 handler->ERRORHANDLER:
>>>> err_no=-2027 new_err_no=-2027
>>>> 2017-04-20 16:43:04.916329 7ff87c6c0700  2 req 354:0.052585:s3:GET
>>>> /admin/log:get_obj:op status=0
>>>> 2017-04-20 16:43:04.916339 7ff87c6c0700  2 req 354:0.052595:s3:GET
>>>> /admin/log:get_obj:http status=403
>>>> 2017-04-20 16:43:04.916343 7ff87c6c0700  1 ====== req done
>>>> req=0x7ff87c6ba710 op status=0 http_status=403 ======
>>>> 2017-04-20 16:43:04.916350 7ff87c6c0700 20 process_request() returned
>>>> -2027
>>>> 2017-04-20 16:43:04.916390 7ff87c6c0700  1 civetweb: 0x7ff990015610:
>>>> 10.80.6.26 - - [20/Apr/2017:16:43:04 +0200] "GET /admin/log HTTP/1.1"
>>>> 403 0
>>>> - -
>>>> 2017-04-20 16:43:04.917212 7ff9777e6700 20
>>>> cr:s=0x7ff97000d420:op=0x7ff9703a5440:18RGWMetaSyncShardCR: operate()
>>>> 2017-04-20 16:43:04.917223 7ff9777e6700 20 rgw meta sync:
>>>> incremental_sync:1544: shard_id=20
>>>> mdlog_marker=1_1492686039.901886_5551978.1
>>>> sync_marker.marker=1_1492686039.901886_5551978.1 period_marker=
>>>> 2017-04-20 16:43:04.917227 7ff9777e6700 20 rgw meta sync:
>>>> incremental_sync:1551: shard_id=20 syncing mdlog for shard_id=20
>>>> 2017-04-20 16:43:04.917236 7ff9777e6700 20
>>>> cr:s=0x7ff97000d420:op=0x7ff970066b80:24RGWCloneMetaLogCoroutine:
>>>> operate()
>>>> 2017-04-20 16:43:04.917238 7ff9777e6700 20 rgw meta sync: operate:
>>>> shard_id=20: init request
>>>> 2017-04-20 16:43:04.917240 7ff9777e6700 20
>>>> cr:s=0x7ff97000d420:op=0x7ff970066b80:24RGWCloneMetaLogCoroutine:
>>>> operate()
>>>> 2017-04-20 16:43:04.917241 7ff9777e6700 20 rgw meta sync: operate:
>>>> shard_id=20: reading shard status
>>>> 2017-04-20 16:43:04.917303 7ff9777e6700 20 run: stack=0x7ff97000d420 is
>>>> io
>>>> blocked
>>>> 2017-04-20 16:43:04.918285 7ff9777e6700 20
>>>> cr:s=0x7ff97000d420:op=0x7ff970066b80:24RGWCloneMetaLogCoroutine:
>>>> operate()
>>>> 2017-04-20 16:43:04.918295 7ff9777e6700 20 rgw meta sync: operate:
>>>> shard_id=20: reading shard status complete
>>>> 2017-04-20 16:43:04.918307 7ff9777e6700 20 rgw meta sync: shard_id=20
>>>> marker=1_1492686039.901886_5551978.1 last_update=2017-04-20
>>>> 13:00:39.0.901886s
>>>> 2017-04-20 16:43:04.918316 7ff9777e6700 20
>>>> cr:s=0x7ff97000d420:op=0x7ff970066b80:24RGWCloneMetaLogCoroutine:
>>>> operate()
>>>> 2017-04-20 16:43:04.918317 7ff9777e6700 20 rgw meta sync: operate:
>>>> shard_id=20: sending rest request
>>>> 2017-04-20 16:43:04.918381 7ff9777e6700 20 RGWEnv::set(): HTTP_DATE: Thu
>>>> Apr
>>>> 20 14:43:04 2017
>>>> 2017-04-20 16:43:04.918390 7ff9777e6700 20 > HTTP_DATE -> Thu Apr 20
>>>> 14:43:04 2017
>>>> 2017-04-20 16:43:04.918404 7ff9777e6700 10 get_canon_resource():
>>>> dest=/admin/log
>>>> 2017-04-20 16:43:04.918406 7ff9777e6700 10 generated canonical header:
>>>> GET
>>>>
>>>> --
>>>> Kind regards,
>>>>
>>>> Ben Morrice
>>>>
>>>> ______________________________________________________________________
>>>> Ben Morrice | e: ben.morrice@xxxxxxx | t: +41-21-693-9670
>>>> EPFL / BBP
>>>> Biotech Campus
>>>> Chemin des Mines 9
>>>> 1202 Geneva
>>>> Switzerland
>>>>
>>>> _______________________________________________
>>>> ceph-users mailing list
>>>> ceph-users@xxxxxxxxxxxxxx
>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>
>>
>
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com



[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux