<< Both OSDs are pinned to two cores on the system Is there any reason you are pinning osds like that ? I would say for object workload there is no need to pin osds. The configuration you mentioned , Ceph with 4M object PUT it should be saturating your network first. Have you run say 4M object GET to see what BW you are getting ? Thanks & Regards Somnath -----Original Message----- From: ceph-users [mailto:ceph-users-bounces@xxxxxxxxxxxxxx] On Behalf Of Mohammed Naser Sent: Friday, January 13, 2017 9:51 AM To: Wido den Hollander Cc: ceph-users@xxxxxxxxxxxxxx Subject: Re: All SSD cluster performance > On Jan 13, 2017, at 12:41 PM, Wido den Hollander <wido@xxxxxxxx> wrote: > > >> Op 13 januari 2017 om 18:39 schreef Mohammed Naser <mnaser@xxxxxxxxxxxx>: >> >> >> >>> On Jan 13, 2017, at 12:37 PM, Wido den Hollander <wido@xxxxxxxx> wrote: >>> >>> >>>> Op 13 januari 2017 om 18:18 schreef Mohammed Naser <mnaser@xxxxxxxxxxxx>: >>>> >>>> >>>> Hi everyone, >>>> >>>> We have a deployment with 90 OSDs at the moment which is all SSD that’s not hitting quite the performance that it should be in my opinion, a `rados bench` run gives something along these numbers: >>>> >>>> Maintaining 16 concurrent writes of 4194304 bytes to objects of >>>> size 4194304 for up to 10 seconds or 0 objects Object prefix: benchmark_data_bench.vexxhost._30340 >>>> sec Cur ops started finished avg MB/s cur MB/s last lat(s) avg lat(s) >>>> 0 0 0 0 0 0 - 0 >>>> 1 16 158 142 568.513 568 0.0965336 0.0939971 >>>> 2 16 287 271 542.191 516 0.0291494 0.107503 >>>> 3 16 375 359 478.75 352 0.0892724 0.118463 >>>> 4 16 477 461 461.042 408 0.0243493 0.126649 >>>> 5 16 540 524 419.216 252 0.239123 0.132195 >>>> 6 16 644 628 418.67 416 0.347606 0.146832 >>>> 7 16 734 718 410.281 360 0.0534447 0.147413 >>>> 8 16 811 795 397.487 308 0.0311927 0.15004 >>>> 9 16 879 863 383.537 272 0.0894534 0.158513 >>>> 10 16 980 964 385.578 404 0.0969865 0.162121 >>>> 11 3 981 978 355.613 56 0.798949 0.171779 >>>> Total time run: 11.063482 >>>> Total writes made: 981 >>>> Write size: 4194304 >>>> Object size: 4194304 >>>> Bandwidth (MB/sec): 354.68 >>>> Stddev Bandwidth: 137.608 >>>> Max bandwidth (MB/sec): 568 >>>> Min bandwidth (MB/sec): 56 >>>> Average IOPS: 88 >>>> Stddev IOPS: 34 >>>> Max IOPS: 142 >>>> Min IOPS: 14 >>>> Average Latency(s): 0.175273 >>>> Stddev Latency(s): 0.294736 >>>> Max latency(s): 1.97781 >>>> Min latency(s): 0.0205769 >>>> Cleaning up (deleting benchmark objects) Clean up completed and >>>> total clean up time :3.895293 >>>> >>>> We’ve verified the network by running `iperf` across both replication and public networks and it resulted in 9.8Gb/s (10G links for both). The machine that’s running the benchmark doesn’t even saturate it’s port. The SSDs are S3520 960GB drives which we’ve benchmarked and they can handle the load using fio/etc. At this point, not really sure where to look next.. anyone running all SSD clusters that might be able to share their experience? >>> >>> I suggest that you search a bit on the ceph-users list since this topic has been discussed multiple times in the past and even recently. >>> >>> Ceph isn't your average storage system and you have to keep that in mind. Nothing is free in this world. Ceph provides excellent consistency and distribution of data, but that also means that you have things like network and CPU latency. >>> >>> However, I suggest you look up a few threads on this list which have valuable tips. >>> >>> Wido >> >> Thanks for the reply, I’ve actually done quite a lot of research and went through many of the previous posts. While I agree a 100% with your statement, I’ve found that other people with similar setups have been able to reach numbers that I cannot, which leads me to believe that there is actually an issue in here. They have been able to max out at 1200 MB/s which is the maximum of their benchmarking host. We’d like to reach that and I think that given the specifications of the cluster, it can do it with no problems. > > A few tips: > > - Disable all logging in Ceph (debug_osd, debug_ms, debug_auth, etc, > etc) All logging is configured to default settings, should those be turned down? > - Disable power saving on the CPUs All disabled as well, everything running on `performance` mode. > > Can you also share how the 90 OSDs are distributed in the cluster and what CPUs you have? There are 45 machines with 2 OSDs each. The servers they’re located on on average have 24 core ~3GHz Intel CPUs. Both OSDs are pinned to two cores on the system. > > Wido > >> >>>> >>>> Thanks, >>>> Mohammed >>>> _______________________________________________ >>>> ceph-users mailing list >>>> ceph-users@xxxxxxxxxxxxxx >>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com ________________________________ PLEASE NOTE: The information contained in this electronic mail message is intended only for the use of the designated recipient(s) named above. If the reader of this message is not the intended recipient, you are hereby notified that you have received this message in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify the sender by telephone or e-mail (as shown above) immediately and destroy any and all copies of this message in your possession (whether hard copies or electronically stored copies). _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |