Thanks Burkhard, JiaJia..
able to resolve the issue with the " --typecode=1:45b0969e-9b03-4f30-b4c6-b4b80ceff106 " for journal & "--typecode=2:4fbd7e29-9d25-41b8-afd0-062c0ceff05d" for the data partition while creating the partition with sgdisk !
Thanks
Sandeep
On Fri, Dec 16, 2016 at 3:01 PM, sandeep.coolboy@xxxxxxxxx <sandeep.coolboy@xxxxxxxxx> wrote:
Hi,The manual method is good if you have small number of OSD's, but in case of OSD's > 200 it will be a very time consuming task to create the OSD's like that.Also i used the ceph-ansible to setup my cluster with 2 OSD's per SSD and my cluster was UP & running but i encountered the auto mount problem when one of the my OSD node rebooted.So i started to look into it by setting up a virtual environment.Thanks,SandeepOn Fri, Dec 16, 2016 at 2:45 PM, JiaJia Zhong <zhongjiajia@xxxxxxxxxxxx> wrote:______________________________In your scenario, don't use ceph-disk------------------ Original ------------------ Date: Fri, Dec 16, 2016 05:09 PMTo: "CEPH list"<ceph-users@xxxxxxxxxxxxxm >;Subject: Re: 2 OSD's per drive , unable to start the osd'sHi,
On 12/16/2016 09:22 AM, sandeep.coolboy@xxxxxxxxx wrote:
Hi,
I was trying the scenario where i have partitioned my drive (/dev/sdb) into 4 (sdb1, sdb2 , sdb3, sdb4) using the sgdisk utility:
# sgdisk -z /dev/sdb
# sgdisk -n 1:0:+1024 /dev/sdb -c 1:"ceph journal"
# sgdisk -n 1:0:+1024 /dev/sdb -c 2:"ceph journal"
# sgdisk -n 1:0:+4096 /dev/sdb -c 3:"ceph data"
# sgdisk -n 1:0:+4096 /dev/sdb -c 3:"ceph data"
checked the partition with lsblk and it has created the partitions as expected.
im using the ceph-disk command to create the osd's:
# ceph-disk prepare --cluster ceph /dev/sdb3 /dev/sdb1
prepare_device: OSD will not be hot-swappable if journal is not the same device as the osd data
prepare_device: Journal /dev/sdb1 was not prepared with ceph-disk. Symlinking directly.
set_data_partition: incorrect partition UUID: 0fc63daf-8483-4772-8e79-3d69d8477de4, expected ['4fbd7e29-9d25-41b8-afd0-5ec0 0ceff05d', '4fbd7e29-9d25-41b8-afd0-062c0 ceff05d', '4fbd7e29-8ae0-4982-bf9d-5a8d8 67af560', '4fbd7e29-9d25-41b8-afd0-35865 ceff05d']
*snipsnap*
CEPH OSD and journal partitions have a certain partition type UUID, as the message suggests. To avoid problems with OSD autodetection at boot time you need to change the UUID.
Regards,
Burkhard_________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
