We are using ceph 80.9 and we recently recovered from a power outage which caused some data loss. We had replica set to 1. Since then we have installed another node with the idea that we would change the replica to 3.
--
We tried to change 1 of the pools to replica 3 but it always gets stuck. It's been at the same degradation level for over 12 hours now.
ceph -w
cluster 19bc15fd-c0cc-4f35-acd2-292a86fbcf7d
health HEALTH_WARN 64 pgs degraded; 64 pgs stuck unclean; recovery 10223/1636773 objects degraded (0.625%)
monmap e3: 3 mons at {node-3=192.168.0.13:6789/0,node-4=192.168.0.7:6789/0,node-5=192.168.0.8:6789/0 }, election epoch 150454, quorum 0,1,2 node-4,node-5,node-3
osdmap e914: 7 osds: 7 up, 7 in
pgmap v3507206: 960 pgs, 15 pools, 9469 GB data, 1578 kobjects
9587 GB used, 57388 GB / 66976 GB avail
10223/1636773 objects degraded (0.625%)
896 active+clean
64 active+degraded
Any idea on what's going on or how we can get the process to resume?
-------------.
Ben Erridge
Center For Information Management, Inc.
3550 West Liberty Road Ste 1
Ann Arbor, MI 48103
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
