Hi Michiel,
How are you configuring VM disks on Proxmox? What type (virtio, scsi,
ide) and what cache setting?
El 23/11/16 a las 07:53, M. Piscaer escribió:
Hi,
I have an little performance problem with KVM and Ceph.
I'm using Proxmox 4.3-10/7230e60f, with KVM version
pve-qemu-kvm_2.7.0-8. Ceph is on version jewel 10.2.3 on both the
cluster as the client (ceph-common).
The systems are connected to the network via an 4x bonding with an total
of 4 Gb/s.
Within an guest,
- when I do an write to I get about 10 MB/s.
- Also when I try to do an write within the guest but then directly to
ceph I get the same speed.
- But when I mount an ceph object on the Proxmox host I get about 110MB/s
The guest is connected to interface vmbr160 → bond0.160 → bond0.
This bridge vmbr160 has an IP address with the same subnet as the ceph
cluster with an mtu 9000.
The KVM block device is an virtio device.
What can I do to solve this problem?
Kind regards,
Michiel Piscaer
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Zuzendari Teknikoa / Director Técnico
Binovo IT Human Project, S.L.
Telf. 943493611
943324914
Astigarraga bidea 2, planta 6 dcha., ofi. 3-2; 20180 Oiartzun (Gipuzkoa)
www.binovo.es
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com