Hello.
I have a cluster stuck with 2 pg's stuck undersized degraded, with 25
unfound objects.
# ceph health detail
HEALTH_WARN 2 pgs degraded; 2 pgs recovering; 2 pgs stuck degraded; 2 pgs stuck unclean; 2 pgs stuck undersized; 2 pgs undersized; recovery 294599/149522370 objects degraded (0.197%); recovery 640073/149522370 objects misplaced (0.428%); recovery 25/46579241 unfound (0.000%); noout flag(s) set
pg 6.d4 is stuck unclean for 8893374.380079, current state active+recovering+undersized+degraded+remapped, last acting [62]
pg 6.ab is stuck unclean for 8896787.249470, current state active+recovering+undersized+degraded+remapped, last acting [18,12]
pg 6.d4 is stuck undersized for 438122.427341, current state active+recovering+undersized+degraded+remapped, last acting [62]
pg 6.ab is stuck undersized for 416947.461950, current state active+recovering+undersized+degraded+remapped, last acting [18,12]
pg 6.d4 is stuck degraded for 438122.427402, current state active+recovering+undersized+degraded+remapped, last acting [62]
pg 6.ab is stuck degraded for 416947.462010, current state active+recovering+undersized+degraded+remapped, last acting [18,12]
pg 6.d4 is active+recovering+undersized+degraded+remapped, acting [62], 25 unfound
pg 6.ab is active+recovering+undersized+degraded+remapped, acting [18,12]
recovery 294599/149522370 objects degraded (0.197%)
recovery 640073/149522370 objects misplaced (0.428%)
recovery 25/46579241 unfound (0.000%)
noout flag(s) set
have been following the troubleshooting guide at
http://docs.ceph.com/docs/hammer/rados/troubleshooting/troubleshooting-pg/
but gets stuck without a resolution.
luckily it is not critical data. so i wanted to mark the pg lost so it
could become health-ok
# ceph pg 6.d4 mark_unfound_lost delete
Error EINVAL: pg has 25 unfound objects but we haven't probed all
sources, not marking lost
querying the pg i see that it would want osd.80 and osd 36
{
"osd": "80",
"status": "osd is down"
},
trying to mark the osd's lost does not work either. since the osd's was
removed from the cluster a long time ago.
# ceph osd lost 80 --yes-i-really-mean-it
osd.80 is not down or doesn't exist
# ceph osd lost 36 --yes-i-really-mean-it
osd.36 is not down or doesn't exist
and this is where i am stuck.
have tried stopping and starting the 3 osd's but that did not have any
effect.
Anyone have any advice how to proceed ?
full output at: http://paste.debian.net/hidden/be03a185/
this is hammer 0.94.9 on debian 8.
kind regards
Ronny Aasen
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
