Re: Increase PG number

[Matteo Dacrema <mdacrema@xxxxxxxx>]

Hi , thanks for your reply.

Yes, I’don’t any near full osd.

The problem is not the rebalancing process but the process of creation of new pgs.

I’ve only 2 host running Ceph Firefly version with 3 SSDs for journaling each.

During the creation of new pgs all the volumes attached stop to read or write showing high iowait.

Ceph -s tell me that there are thousand of slow requests.

When all the pgs are created slow request begin to decrease and the cluster start rebalancing process.

Matteo

This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

Il giorno 18 set 2016, alle ore 13:08, Goncalo Borges <goncalo.borges@xxxxxxxxxxxxx> ha scritto:

Hi
I am assuming that you do not have any near full osd  (either before or along the pg splitting process) and that your cluster is healthy.

To minimize the impact on the clients during recover or operations like pg splitting, it is good to set the following configs. Obviously the whole operation will take longer to recover but the impact on clients will be minimized.

#  ceph daemon mon.rccephmon1 config show | egrep "(osd_max_backfills|osd_recovery_threads|osd_recovery_op_priority|osd_client_op_priority|osd_recovery_max_active)"
   "osd_max_backfills": "1",
   "osd_recovery_threads": "1",
   "osd_recovery_max_active": "1"
   "osd_client_op_priority": "63",
   "osd_recovery_op_priority": "1"

Cheers
G.
________________________________________
From: ceph-users [ceph-users-bounces@xxxxxxxxxxxxxx] on behalf of Matteo Dacrema [mdacrema@xxxxxxxx]
Sent: 18 September 2016 03:42
To: ceph-users@xxxxxxxxxxxxxx
Subject: Increase PG number

Hi All,

I need to expand my ceph cluster and I also need to increase pg number.
In a test environment I see that during pg creation all read and write operations are stopped.

Is that a normal behavior ?

Thanks
Matteo
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.


--
Questo messaggio e' stato analizzato con Libra ESVA ed e' risultato non infetto.
Seguire il link qui sotto per segnalarlo come spam:
http://mx01.enter.it/cgi-bin/learn-msg.cgi?id=D6CF2401EE.A1426

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com