Hello Brian,
Thanks for your response!
Can you please elaborate on this.
Do you mean i must use
4 x 1TB HDD on each nodes rather than 2 x 2TB?
This is going to be a lab environment. Can you please suggest to have best possible design for my lab environment.
On Wed, Aug 17, 2016 at 9:54 AM, Brian :: <bc@xxxxxxxx> wrote:
You're going to see pretty slow performance on a cluster this size
with spinning disks...
Ceph scales very very well but at this type of size cluster it can be
challenging to get nice throughput and iops..
for something small like this either use all ssd osds or consider
having more spinning osds per node backed by nvme or ssd journals..
> ______________________________
On Wed, Aug 17, 2016 at 1:14 PM, Gaurav Goyal <er.gauravgoyal@xxxxxxxxx> wrote:
> Dear Ceph Users,
>
> Can you please address my scenario and suggest me a solution.
>
> Regards
> Gaurav Goyal
>
> On Tue, Aug 16, 2016 at 11:13 AM, Gaurav Goyal <er.gauravgoyal@xxxxxxxxx>
> wrote:
>>
>> Hello
>>
>>
>> I need your help to redesign my ceph storage network.
>>
>> As suggested in earlier discussions, i must not use SAN storage. So we
>> have decided to removed it.
>>
>> Now we are ordering Local HDDs.
>>
>> My Network would be
>>
>> Host1 --> Controller + COmpute --> Local Disk 600GB Host 2--> Compute2 -->
>> Local Disk 600GB Host 3 --> Compute2
>>
>> Is it right setup for ceph network? For Host1 and Host2 , we are using 1
>> 600GB disk for basic filesystem.
>>
>> Should we use same size storage disks for ceph environment or i can order
>> Disks in size of 2TB for ceph cluster?
>>
>> Making it
>>
>> 2T X 2 on Host1 2T X 2 on Host 2 2T X 2 on Host 3
>>
>> 12TB in total. replication factor 2 should make it 6 TB?
>>
>>
>> Regards
>>
>> Gaurav Goyal
>>
>>
>> On Thu, Aug 4, 2016 at 1:52 AM, Bharath Krishna <BKrishna@xxxxxxxxxxxxxxx>
>> wrote:
>>>
>>> Hi Gaurav,
>>>
>>> There are several ways to do it depending on how you deployed your ceph
>>> cluster. Easiest way to do it is using ceph-ansible with purge-cluster yaml
>>> ready made to wipe off CEPH.
>>>
>>> https://github.com/ceph/ceph-ansible/blob/master/purge- cluster.yml
>>>
>>> You may need to configure ansible inventory with ceph hosts.
>>>
>>> Else if you want to purge manually, you can do it using:
>>> http://docs.ceph.com/docs/hammer/rados/deployment/ceph- deploy-purge/
>>>
>>>
>>> Thanks
>>> Bharath
>>>
>>> From: ceph-users <ceph-users-bounces@lists.ceph.com > on behalf of Gaurav
>>> Goyal <er.gauravgoyal@xxxxxxxxx>
>>> Date: Thursday, August 4, 2016 at 8:19 AM
>>> To: David Turner <david.turner@xxxxxxxxxxxxxxxx>
>>> Cc: ceph-users <ceph-users@xxxxxxxxxxxxxx>
>>> Subject: Re: Fwd: Ceph Storage Migration from SAN storage to
>>> Local Disks
>>>
>>> Please suggest a procedure for this uninstallation process?
>>>
>>>
>>> Regards
>>> Gaurav Goyal
>>>
>>> On Wed, Aug 3, 2016 at 5:58 PM, Gaurav Goyal
>>> <er.gauravgoyal@xxxxxxxxx<mailto:er.gauravgoyal@gmail. com >> wrote:
>>>
>>> Thanks for your prompt
>>> response!
>>>
>>> Situation is bit different now. Customer want us to remove the ceph
>>> storage configuration from scratch. Let is openstack system work without
>>> ceph. Later on install ceph with local disks.
>>>
>>> So I need to know a procedure to uninstall ceph and unconfigure it from
>>> openstack.
>>>
>>> Regards
>>> Gaurav Goyal
>>> On 03-Aug-2016 4:59 pm, "David Turner"
>>> <david.turner@xxxxxxxxxxxxxxxx<mailto:david.turner@ storagecraft.com >> wrote:
>>> If I'm understanding your question correctly that you're asking how to
>>> actually remove the SAN osds from ceph, then it doesn't matter what is using
>>> the storage (ie openstack, cephfs, krbd, etc) as the steps are the same.
>>>
>>> I'm going to assume that you've already added the new storage/osds to the
>>> cluster, weighted the SAN osds to 0.0 and that the backfilling has finished.
>>> If that is true, then your disk used space on the SAN's should be basically
>>> empty while the new osds on the local disks should have a fair amount of
>>> data. If that is the case, then for every SAN osd, you just run the
>>> following commands replacing OSD_ID with the osd's id:
>>>
>>> # On the server with the osd being removed
>>> sudo stop ceph-osd id=OSD_ID
>>> ceph osd down OSD_ID
>>> ceph osd out OSD_ID
>>> ceph osd crush remove osd.OSD_ID
>>> ceph auth del osd.OSD_ID
>>> ceph osd rm OSD_ID
>>>
>>> Test running those commands on a test osd and if you had set the weight
>>> of the osd to 0.0 previously and if the backfilling had finished, then what
>>> you should see is that your cluster has 1 less osd than it used to, and no
>>> pgs should be backfilling.
>>>
>>> HOWEVER, if my assumptions above are incorrect, please provide the output
>>> of the following commands and try to clarify your question.
>>>
>>> ceph status
>>> ceph osd tree
>>>
>>> I hope this helps.
>>>
>>> > Hello David,
>>> >
>>> > Can you help me with steps/Procedure to uninstall Ceph storage from
>>> > openstack environment?
>>> >
>>> >
>>> > Regards
>>> > Gaurav Goyal
>>> ________________________________
>>> [cid:image001.jpg@01D1EE42.88EF6E60]<https:// storagecraft.com >
>>>
>>> David Turner | Cloud Operations Engineer | StorageCraft Technology
>>> Corporation<https://storagecraft.com >
>>> 380 Data Drive Suite 300 | Draper | Utah | 84020
>>> Office: 801.871.2760 | Mobile: 385.224.2943<tel:385.224.2943>
>>>
>>> ________________________________
>>> If you are not the intended recipient of this message or received it
>>> erroneously, please notify the sender and delete it, together with any
>>> attachments, and be advised that any dissemination or copying of this
>>> message is prohibited.
>>>
>>> ________________________________
>>>
>>
>
>
_________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph. com
>
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
