Re: PG is in 'stuck unclean' state, but all acting OSD are up

[Goncalo Borges <goncalo.borges@xxxxxxxxxxxxx>]

Hi Chris...

The precise osd set you see now [79,8,74] was obtained on epoch 104536 but this was after a lot of tries as showed by the recovery section.

Actually, in the first try (on epoch 100767) osd 116 was selected somehow (maybe it was up at the time?) and probably the pg got stuck because it went down during the recover process?

recovery_state": [
        {
            "name": "Started\/Primary\/Peering\/GetInfo",
            "enter_time": "2016-08-11 11:45:06.052568",
            "requested_info_from": []
        },
        {
            "name": "Started\/Primary\/Peering",
            "enter_time": "2016-08-11 11:45:06.052558",
            "past_intervals": [
                {
                    "first": 100767,
                    "last": 100777,
                    "maybe_went_rw": 1,
                    "up": [
                        79,
                        116,
                        74
                    ],
                    "acting": [
                        79,
                        116,
                        74
                    ],
                    "primary": 79,
                    "up_primary": 79
                },

The pg query also shows

peering_blocked_by": [
                {
                    "osd": 116,
                    "current_lost_at": 0,
                    "comment": "starting or marking this osd lost may let us proceed"
                }

Maybe, you can check the documentation in [1] and see if you think you could follow the suggestion inside the pg and mark osd 116 as lost. This should be done after proper evaluation from you.

Another thing I found strange is that in the recovery section, there are a lot of tries where you do not get a proper osd set. The very last recover try was on epoch 104540.

                {
                    "first": 104536,
                    "last": 104540,
                    "maybe_went_rw": 1,
                    "up": [
                        2147483647,
                        8,
                        74
                    ],
                    "acting": [
                        2147483647,
                        8,
                        74
                    ],
                    "primary": 8,
                    "up_primary": 8
                }

From [2], "When CRUSH fails to find enough OSDs to map to a PG, it will show as a 2147483647 which is ITEM_NONE or no OSD found.".

This could be an artifact of the peering being blocked by osd.116, or a genuine problem where you are not being able to get a proper osd set. That could be for a variety of reasons: from network issues, to osds being almost full or simply because the system can't get 3 osds in 3 different hosts.

Cheers

Goncalo

[1] http://docs.ceph.com/docs/master/rados/troubleshooting/troubleshooting-pg/#placement-group-down-peering-failure

[2] http://docs.ceph.com/docs/master/rados/troubleshooting/troubleshooting-pg/

On 08/16/2016 11:42 AM, Heller, Chris wrote:

Output of `ceph pg dump_stuck`

 

# ceph pg dump_stuck

ok

pg_stat state   up      up_primary      acting  acting_primary

4.2a8   down+peering    [79,8,74]       79      [79,8,74]       79

4.c3    down+peering    [56,79,67]      56      [56,79,67]      56

 

-Chris

 

From: Goncalo Borges <goncalo.borges@xxxxxxxxxxxxx>
Date: Monday, August 15, 2016 at 9:03 PM
To: "ceph-users@xxxxxxxxxxxxxx" <ceph-users@xxxxxxxxxxxxxx>, "Heller, Chris" <cheller@xxxxxxxxxx>
Subject: Re: PG is in 'stuck unclean' state, but all acting OSD are up

 

Hi Heller...

Can you actually post the result of

   ceph pg dump_stuck ?

Cheers

G.

 

 

On 08/15/2016 10:19 PM, Heller, Chris wrote:

I’d like to better understand the current state of my CEPH cluster.

 

I currently have 2 PG that are in the ‘stuck unclean’ state:

 

# ceph health detail

HEALTH_WARN 2 pgs down; 2 pgs peering; 2 pgs stuck inactive; 2 pgs stuck unclean

pg 4.2a8 is stuck inactive for 124516.777791, current state down+peering, last acting [79,8,74]

pg 4.c3 is stuck inactive since forever, current state down+peering, last acting [56,79,67]

pg 4.2a8 is stuck unclean for 124536.223284, current state down+peering, last acting [79,8,74]

pg 4.c3 is stuck unclean since forever, current state down+peering, last acting [56,79,67]

pg 4.2a8 is down+peering, acting [79,8,74]

pg 4.c3 is down+peering, acting [56,79,67]

 

While my cluster does currently have some down OSD, none are in the acting set for either PG:

 

ceph osd tree | grep down

73   1.00000         osd.73              down        0          1.00000

96   1.00000         osd.96              down        0          1.00000

110   1.00000         osd.110             down        0          1.00000

116   1.00000         osd.116             down        0          1.00000

120   1.00000         osd.120             down        0          1.00000

126   1.00000         osd.126             down        0          1.00000

124   1.00000         osd.124             down        0          1.00000

119   1.00000         osd.119             down        0          1.00000

 

I’ve queried one of the two PG, and see that recovery is currently blocked on OSD.116, which is indeed down, but is not part of the acting set of OSD for that PG:

 

http://pastebin.com/Rg2hK9GE

 

This is all with CEPH version 0.94.3:

 

# ceph version

ceph version 0.94.3 (95cefea9fd9ab740263bf8bb4796fd864d9afe2b)

 

Why does this PG remain ‘stuck unclean’?

Is there some steps I can take to unstick it, given that all the acting OSD are up and in?

 

(* Re-sent, now that I’m subscribed to list *)

-Chris

_______________________________________________

ceph-users mailing list

ceph-users@xxxxxxxxxxxxxx

http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

-- 

Goncalo Borges

Research Computing

ARC Centre of Excellence for Particle Physics at the Terascale

School of Physics A28 | University of Sydney, NSW  2006

T: +61 2 93511937

-- 
Goncalo Borges
Research Computing
ARC Centre of Excellence for Particle Physics at the Terascale
School of Physics A28 | University of Sydney, NSW  2006
T: +61 2 93511937

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com