On Mon, Jul 25, 2016 at 5:18 PM, Joao Eduardo Luis <joao@xxxxxxx
<mailto:joao@xxxxxxx>> wrote:
On 07/25/2016 04:34 PM, Sergio A. de Carvalho Jr. wrote:
Thanks, Joao.
All monitors have the exact same mom map.
I suspect you're right that there might be some communication
problem
though. I stopped monitor 1 (60zxl02), but the other 3 monitors
still
failed to reach a quorum. I could see monitor 0 was still declaring
victory but the others were always calling for new elections:
2016-07-25 15:18:59.775144 7f8760af7700 0 log_channel(cluster) log
[INF] : mon.60z0m02@0 won leader election with quorum 0,2,4
2016-07-25 15:18:54.702176 7fc1b357d700 1
mon.610wl02@2(electing) e5
handle_timecheck drop unexpected msg
2016-07-25 15:18:54.704526 7fc1b357d700 1
mon.610wl02@2(electing).data_health(11626) service_dispatch not in
quorum -- drop message
2016-07-25 15:19:09.792511 <tel:09.792511> 7fc1b3f7e700 1
mon.610wl02@2(peon).paxos(paxos recovering c 1318755..1319322)
lease_timeout -- calling new election
2016-07-25 15:19:09.792825 <tel:09.792825> 7fc1b357d700 0
log_channel(cluster) log
[INF] : mon.610wl02 calling new monitor election
I'm curious about the "handle_timecheck drop unexpected msg"
message.
timechecks (i.e., checking for clock skew), as well as the
data_health service (which makes sure you have enough disk space in
the mon data dir) are only run when you have a quorum. If a message
is received by a monitor not in a quorum, regardless of state, it
will be dropped.
Assuming you know took one of the self-appointed leaders out - by
shutting it down, for instance -, you should now check what's
causing elections not to hold.
In these cases, assuming your 3 monitors do form a quorum, the
traditional issue tends to be 'lease timeouts'. I.e., the leader
fails to provide a lease extension on paxos for the peons, and the
peons assume the leader failed in some form (unresponsive, down,
whatever).
Above it does seem a lease timeout was triggered on a peon. This may
have happened because:
1. leader did not extend the lease
2. leader did extend the lease but lease was in the past - usually
indication of a clock skew on the leader, on the peons, or both.
3. leader did extend the lease, it was with the correct time but
peon failed to dispatch the message on time.
Both 1. and 2. may be due to several factors, but most commonly it's
because the monitor was stuck doing something. This something, more
often than not, is leveldb. If this is the case, check the size of
your leveldb. If it is over 5 or 6GB in size, you may need to
manually compact the store (mon compact on start = true, iirc).
HTH
-Joao
On Mon, Jul 25, 2016 at 4:10 PM, Joao Eduardo Luis <joao@xxxxxxx
<mailto:joao@xxxxxxx>
<mailto:joao@xxxxxxx <mailto:joao@xxxxxxx>>> wrote:
On 07/25/2016 03:41 PM, Sergio A. de Carvalho Jr. wrote:
In the logs, there 2 monitors are constantly reporting
that they
won the
leader election:
60z0m02 (monitor 0):
2016-07-25 14:31:11.644335 7f8760af7700 0
log_channel(cluster) log
[INF] : mon.60z0m02@0 won leader election with quorum 0,2,4
2016-07-25 14:31:44.521552 7f8760af7700 1
mon.60z0m02@0(leader).paxos(paxos recovering c
1318755..1319320)
collect
timeout, calling fresh election
60zxl02 (monitor 1):
2016-07-25 14:31:59.542346 7fefdeaed700 1
mon.60zxl02@1(electing).elector(11441) init, last seen
epoch 11441
2016-07-25 14:32:04.583929 7fefdf4ee700 0
log_channel(cluster) log
[INF] : mon.60zxl02@1 won leader election with quorum 1,2,4
2016-07-25 14:32:33.440103 7fefdf4ee700 1
mon.60zxl02@1(leader).paxos(paxos recovering c
1318755..1319319)
collect
timeout, calling fresh election
There are two likely scenarios to explain this:
1. The monitors have different monitors in their monmaps - this
could happen if you didn't add the new monitor via 'ceph
mon add'.
You can check this by running 'ceph daemon mon.<ID>
mon_status' for
each of the monitors in the cluster.
2. some of the monitors are unable to communicate with each
other,
thus will never acknowledge the same leader. This does not
mean you
have two leaders for the same cluster, but it does mean
that you
will end up having two monitors declaring victory and
become the
self-proclaimed leader in the cluster. The peons should
still only
belong to one quorum.
If this does not help you, try setting 'debug mon = 10' and
'debug
ms = 1' on the monitors and check the logs, making sure the
monitors
get the probes and follow the election process. If you need
further
assistance, put those logs online somewhere we can access
them and
we'll try to help you out.
-Joao
On Mon, Jul 25, 2016 at 3:27 PM, Sergio A. de Carvalho Jr.
<scarvalhojr@xxxxxxxxx <mailto:scarvalhojr@xxxxxxxxx>
<mailto:scarvalhojr@xxxxxxxxx <mailto:scarvalhojr@xxxxxxxxx>>
<mailto:scarvalhojr@xxxxxxxxx
<mailto:scarvalhojr@xxxxxxxxx> <mailto:scarvalhojr@xxxxxxxxx
<mailto:scarvalhojr@xxxxxxxxx>>>>
wrote:
Hi,
I have a cluster of 5 hosts running Ceph 0.94.6 on
CentOS
6.5. On
each host, there is 1 monitor and 13 OSDs. We had
an issue
with the
network and for some reason (which I still don't
know why), the
servers were restarted. One host is still down,
but the
monitors on
the 4 remaining servers are failing to enter a quorum.
I managed to get a quorum of 3 monitors by
stopping all Ceph
monitors and OSDs across all machines, and
bringing up the
top 3
ranked monitors in order of rank. After a few
minutes, the
60z0m02
monitor (the top ranked one) became the leader:
{
"name": "60z0m02",
"rank": 0,
"state": "leader",
"election_epoch": 11328,
"quorum": [
0,
1,
2
],
"outside_quorum": [],
"extra_probe_peers": [],
"sync_provider": [],
"monmap": {
"epoch": 5,
"fsid":
"2f51a247-3155-4bcf-9aee-c6f6b2c5e2af",
"modified": "2016-04-28 22:26:48.604393",
"created": "0.000000",
"mons": [
{
"rank": 0,
"name": "60z0m02",
"addr": "10.98.2.166:6789
<http://10.98.2.166:6789>
<http://10.98.2.166:6789> <http://10.98.2.166:6789>\/0"
},
{
"rank": 1,
"name": "60zxl02",
"addr": "10.98.2.167:6789
<http://10.98.2.167:6789>
<http://10.98.2.167:6789> <http://10.98.2.167:6789>\/0"
},
{
"rank": 2,
"name": "610wl02",
"addr": "10.98.2.173:6789
<http://10.98.2.173:6789>
<http://10.98.2.173:6789> <http://10.98.2.173:6789>\/0"
},
{
"rank": 3,
"name": "618yl02",
"addr": "10.98.2.214:6789
<http://10.98.2.214:6789>
<http://10.98.2.214:6789> <http://10.98.2.214:6789>\/0"
},
{
"rank": 4,
"name": "615yl02",
"addr": "10.98.2.216:6789
<http://10.98.2.216:6789>
<http://10.98.2.216:6789> <http://10.98.2.216:6789>\/0"
}
]
}
}
The other 2 monitors became peons:
"name": "60zxl02",
"rank": 1,
"state": "peon",
"election_epoch": 11328,
"quorum": [
0,
1,
2
],
"name": "610wl02",
"rank": 2,
"state": "peon",
"election_epoch": 11328,
"quorum": [
0,
1,
2
],
I then proceeded to start the fourth monitor, 615yl02
(618yl02 is
powered off), but after more than 2 hours and
several election
rounds, the monitors still haven't reached a
quorum. The
monitors
alternate mostly between "election", "probing"
states but
they often
seem to be in different election epochs.
Is this normal?
Is there anything I can do to help the monitors
elect a leader?
Should I manually remove the dead host's monitor
from the
monitor map?
I left all OSD daemons stopped while the election
is going on
purpose. Is this the best thing to do? Would
bringing the
OSDs up
help or complicate matters even more? Or doesn't
it make
any difference?
I don't see anything obviously wrong in the
monitor logs.
They're
mostly filled with messages like the following:
2016-07-25 14:17:57.806148 7fc1b3f7e700 1
mon.610wl02@2(electing).elector(11411) init, last seen
epoch 11411
2016-07-25 14:17:57.829198 7fc1b7caf700 0
log_channel(audit) log
[DBG] : from='admin socket' entity='admin socket'
cmd='mon_status'
args=[]: dispatch
2016-07-25 14:17:57.829200 7fc1b7caf700 0
log_channel(audit) do_log
log to syslog
2016-07-25 14:17:57.829254 7fc1b7caf700 0
log_channel(audit) log
[DBG] : from='admin socket' entity='admin socket'
cmd=mon_status
args=[]: finished
Any help would be hugely appreciated.
Thanks,
Sergio
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx <mailto:ceph-users@xxxxxxxxxxxxxx>
<mailto:ceph-users@xxxxxxxxxxxxxx
<mailto:ceph-users@xxxxxxxxxxxxxx>>
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx <mailto:ceph-users@xxxxxxxxxxxxxx>
<mailto:ceph-users@xxxxxxxxxxxxxx
<mailto:ceph-users@xxxxxxxxxxxxxx>>
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
