Hi,
Are there any messages in 'dmesg'? Are you running a recent kernel on
your client?
--Lincoln
On 6/18/2016 6:25 PM, ServerPoint wrote:
Hi Adam,
Thank you !
That worked.
So now I am testing another large cluster.
This is the Ceph status : (I am using Public network so I have put * )
--------------
root@admin:~/ceph-cluster# ceph -s
cluster 56b6fb46-dc51-4577-90cb-4b3882e82f5c
health HEALTH_OK
monmap e1: 3 mons at
{monitor1=64.*.*.*:6789/0,monitor2=64.*.*.*:6789/0,monitor3=64.*.*.*:6789/0}
election epoch 6, quorum 0,1,2 monitor3,monitor2,monitor1
fsmap e4: 1/1/1 up {0=monitor1=up:active}
osdmap e207: 43 osds: 43 up, 43 in
flags sortbitwise
pgmap v895: 1088 pgs, 3 pools, 2504 bytes data, 20 objects
1674 MB used, 79854 GB / 79855 GB avail
1088 active+clean
-------------
Now, the mount just hangs. There is no error and no reports, just the
command hangs
--------------
~# mount -t ceph 64.*.*.*:6789:/ /mnt/mycephfs -o
name=admin,secret=AQCOx2VXDjR4LhAALkE0xDeBPbRtQtMK3svuvw==
------
Can you help me figure this out.?
On 6/19/2016 3:28 AM, Adam Tygart wrote:
Responses inline.
On Sat, Jun 18, 2016 at 4:53 PM, ServerPoint
<josy@xxxxxxxxxxxxxxxxxxxxx> wrote:
Hi,
I am trying to setup a Ceph cluster and mount it as CephFS
These are the steps that I followed :
-------------------------------------------------
ceph-deploy new mon
ceph-deploy install admin mon node2 node5 node6
ceph-deploy mon create-initial
ceph-deploy disk zap node2:sdb node2:sdc node2:sdd
ceph-deploy disk zap node5:sdb node5:sdc node5:sdd
ceph-deploy disk zap node6:sdb node6:sdc node6:sdd
ceph-deploy osd prepare node2:sdb node2:sdc node2:sdd
ceph-deploy osd prepare node5:sdb node5:sdc node5:sdd
ceph-deploy osd prepare node6:sdb node6:sdc node6:sdd
ceph-deploy osd activate node2:/dev/sdb1 node2:/dev/sdc1
node2:/dev/sdd1
ceph-deploy osd activate node5:/dev/sdb1 node5:/dev/sdc1
node5:/dev/sdd1
ceph-deploy osd activate node6:/dev/sdb1 node6:/dev/sdc1
node6:/dev/sdd1
ceph-deploy admin admin mon node2 node5 node6
ceph-deploy mds create mon
ceph osd pool create cephfs_data 100
ceph osd pool create cephfs_metadata 100
ceph fs new cephfs cephfs_metadata cephfs_data
------------------------------
Health of Cluster is Ok
----------------
root@admin:~/ceph-cluster# ceph -s
cluster 5dfaa36a-45b8-47a2-85c4-3f06f53bcd03
health HEALTH_OK
monmap e1: 1 mons at {mon=10.10.0.122:6789/0}
Monitor at 10.10.0.122...
election epoch 5, quorum 0 mon
fsmap e15: 1/1/1 up {0=mon=up:active}
osdmap e60: 9 osds: 9 up, 9 in
flags sortbitwise
pgmap v252: 264 pgs, 3 pools, 2068 bytes data, 20 objects
309 MB used, 3976 GB / 3977 GB avail
264 active+clean
-------------------------
I then installed ceph on another server to make it as client.
But I am getting the below error while mounting it.
----------------
root@node9:~# mount -t ceph 10.10.0.121:6789:/ /mnt/mycephfs -o
name=admin,secret=AQDhlGVXDhnoGxAAsX7HcOxbrWpSUpSuOTNWBg==
mount: Connection timed out
----------------
Mount trying to talk to 10.10.0.121 (mds-server?). The monitors are
the initial point of contact for anything ceph. They will tell the
client where everything else lives.
I tried restarting all the services but with no success. I am stuck
here.
Please help.
Thanks in advance!
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
