Hello Gregory,
Thanks for your reply. I think am hitting the same bug. Below is the link for log just after an upgrade
https://justpaste.it/ta16
--
https://justpaste.it/ta16
--
Lomayani
On Thu, Apr 14, 2016 at 6:24 PM, Gregory Farnum <gfarnum@xxxxxxxxxx> wrote:
On Thu, Apr 14, 2016 at 7:05 AM, Lomayani S. Laizer <lomlaizer@xxxxxxxxx> wrote:
> Hello,
> I upgraded from 10.1.0 to 10.1.2 with ceph-deploy and my cluster is down
> now. getting below errors
>
> ceph -s
>
> 2016-04-14 17:04:58.909894 7f14686e4700 0 -- :/2590574876 >>
> 10.10.200.4:6789/0 pipe(0x7f146405adf0 sd=3 :0 s=1 pgs=0 cs=0 l=1
> c=0x7f146405c0b0).fault
> 2016-04-14 17:05:01.909949 7f14685e3700 0 -- :/2590574876 >>
> 10.10.200.3:6789/0 pipe(0x7f1458000c80 sd=4 :0 s=1 pgs=0 cs=0 l=1
> c=0x7f1458001f90).fault
> 2016-04-14 17:05:04.910416 7f14686e4700 0 -- :/2590574876 >>
> 10.10.200.4:6789/0 pipe(0x7f1458005120 sd=4 :0 s=1 pgs=0 cs=0 l=1
> c=0x7f14580063e0).fault
> 2016-04-14 17:05:07.910697 7f14685e3700 0 -- :/2590574876 >>
> 10.10.200.2:6789/0 pipe(0x7f1458000c80 sd=4 :0 s=1 pgs=0 cs=0 l=1
> c=0x7f1458002410).fault
Assuming your monitors aren't running and have crashed, can you get
the backtrace out of their log files?
We just discovered an issue with the new FSMap encoding in 10.1.2, if
you had already run an rc and had a filesystem. Patch is building and
being tested now.
-Greg
>
> --
> Lomayani
>
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com