Re: Frozen Client Mounts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Diego,

ok so this is a new case scenario.

Before you said its "until i put some load on it".

Now you say, you can't reproduce it and mention that it happends during
a (known) network maintenance.

So i agree with you, we can assume that your problems were based on
network issues.

Thats also was your logs implies:

"failed lossy con, dropping message"

-- 
Mit freundlichen Gruessen / Best regards

Oliver Dzombic
IP-Interactive

mailto:info@xxxxxxxxxxxxxxxxx

Anschrift:

IP Interactive UG ( haftungsbeschraenkt )
Zum Sonnenberg 1-3
63571 Gelnhausen

HRB 93402 beim Amtsgericht Hanau
Geschäftsführung: Oliver Dzombic

Steuer Nr.: 35 236 3622 1
UST ID: DE274086107


Am 01.04.2016 um 14:07 schrieb Diego Castro:
> Hello Oliver, this issue showed very hard to reproduce, i couldn't make
> it again. 
> My best guess is something with the Azure's network since last week
> (when happened a lot) there were a ongoing maintenance. 
> 
> Here's  the outputs:
> 
> $ ceph -s
>     cluster 25736883-dbf1-4d7a-8796-50e36f9de7a6
>      health HEALTH_OK
>      monmap e1: 4 mons at
> {osmbr0=10.0.3.4:6789/0,osmbr1=10.0.3.6:6789/0,osmbr2=10.0.3.14:6789/0,osmbr3=10.0.3.7:6789/0
> <http://10.0.3.4:6789/0,osmbr1=10.0.3.6:6789/0,osmbr2=10.0.3.14:6789/0,osmbr3=10.0.3.7:6789/0>}
>             election epoch 602, quorum 0,1,2,3 osmbr0,osmbr1,osmbr3,osmbr2
>      osdmap e1816: 10 osds: 10 up, 10 in
>       pgmap v3158931: 128 pgs, 1 pools, 11512 MB data, 3522 objects
>             34959 MB used, 10195 GB / 10229 GB avail
>                  128 active+clean
>   client io 87723 B/s wr, 8 op/s
> 
> $ ceph osd df
> ID WEIGHT  REWEIGHT SIZE   USE    AVAIL  %USE VAR
>  6 1.00000  1.00000  1022G  3224M  1019G 0.31 0.92
>  1 1.00000  1.00000  1022G  3489M  1019G 0.33 1.00
>  2 1.00000  1.00000  1022G  3945M  1019G 0.38 1.13
>  4 1.00000  1.00000  1022G  3304M  1019G 0.32 0.95
>  7 1.00000  1.00000  1022G  3427M  1019G 0.33 0.98
>  3 1.00000  1.00000  1022G  4361M  1018G 0.42 1.25
>  9 1.00000  1.00000  1022G  3650M  1019G 0.35 1.04
>  0 1.00000  1.00000  1022G  3210M  1019G 0.31 0.92
>  5 1.00000  1.00000  1022G  3577M  1019G 0.34 1.02
>  8 1.00000  1.00000  1022G  2765M  1020G 0.26 0.79
>               TOTAL 10229G 34957M 10195G 0.33
> MIN/MAX VAR: 0.79/1.25  STDDEV: 0.04
> 
> 
> 
> $ ceph osd perf
> osd fs_commit_latency(ms) fs_apply_latency(ms)
>   0                     1                    2
>   1                     1                    2
>   2                     2                    3
>   3                     2                    3
>   4                     1                    2
>   5                     2                    3
>   6                     1                    2
>   7                     2                    3
>   8                     1                    2
>   9                     1                    1
> 
> 
> 
> 
> 
> 
> 
> ---
> Diego Castro / The CloudFather
> GetupCloud.com - Eliminamos a Gravidade
> 
> 2016-03-31 18:00 GMT-03:00 Oliver Dzombic <info@xxxxxxxxxxxxxxxxx
> <mailto:info@xxxxxxxxxxxxxxxxx>>:
> 
>     Hi Diego,
> 
>     lets start with the basics and please give us the output of
> 
>     ceph -s
>     ceph osd df
>     ceph osd perf
> 
>     at best before and after you provike the iowait.
> 
>     Thank you !
> 
>     --
>     Mit freundlichen Gruessen / Best regards
> 
>     Oliver Dzombic
>     IP-Interactive
> 
>     mailto:info@xxxxxxxxxxxxxxxxx <mailto:info@xxxxxxxxxxxxxxxxx>
> 
>     Anschrift:
> 
>     IP Interactive UG ( haftungsbeschraenkt )
>     Zum Sonnenberg 1-3
>     63571 Gelnhausen
> 
>     HRB 93402 beim Amtsgericht Hanau
>     Geschäftsführung: Oliver Dzombic
> 
>     Steuer Nr.: 35 236 3622 1
>     UST ID: DE274086107
> 
> 
>     Am 31.03.2016 um 21:38 schrieb Diego Castro:
>     > Hello, everyone.
>     > I have a pretty basic ceph setup running on top of Azure Cloud, (4 mons
>     > and 10 osd's) for rbd images.
>     > Everything seems to be working as expected until i put some load on it,
>     > sometimes it doesn't complete the process (mysql restore for ex.) and
>     > sometimes it does without any issues.
>     >
>     >
>     > Client Kernel: 3.10.0-327.10.1.el7.x86_64
>     > OSD Kernel: 3.10.0-229.7.2.el7.x86_64
>     >
>     > Ceph: ceph-0.94.5-0.el7.x86_64
>     >
>     > On the client side, i have 100%iowait, a lot of "INFO: task blocked for
>     > more than 120 seconds"
>     > On the osd side, i have no evidences of faulty disk or read/write
>     > latency, but i found the following messages:
>     >
>     >
>     > 2016-03-28 17:04:03.425249 7f7329fc5700  0 bad crc in data 641367213 !=
>     > exp 3107019767
>     > 2016-03-28 17:04:03.440599 7f7329fc5700  0 -- 10.0.3.9:6800/2272 <http://10.0.3.9:6800/2272>
>     > <http://10.0.3.9:6800/2272> >> 10.0.2.5:0/1998047321
>     <http://10.0.2.5:0/1998047321>
>     > <http://10.0.2.5:0/1998047321> pipe(0x13cc4800 sd=54 :6800 s=0 pgs=0
>     > cs=0 l=0 c=0x13883f40).accept peer addr is really 10.0.2.5:0/1998047321 <http://10.0.2.5:0/1998047321>
>     > <http://10.0.2.5:0/1998047321> (socket is 10.0.2.5:34702/0
>     <http://10.0.2.5:34702/0>
>     > <http://10.0.2.5:34702/0>)
>     > 2016-03-28 17:04:03.487497 7f7333e6a700  0 -- 10.0.3.9:6800/2272 <http://10.0.3.9:6800/2272>
>     > <http://10.0.3.9:6800/2272> submit_message osd_op_reply(20046
>     > rb.0.6040.238e1f29.000000000074 [set-alloc-hint object_size 4194304
>     > write_size 4194304,write 0~524288] v1753'32512 uv32512 ondisk = 0) v6
>     > remote, 10.0.2.5:0/1998047321 <http://10.0.2.5:0/1998047321>
>     <http://10.0.2.5:0/1998047321>, failed
>     > lossy con, dropping message 0x12b539c0
>     > 2016-03-28 17:04:03.532302 7f733666f700  0 -- 10.0.3.9:6800/2272 <http://10.0.3.9:6800/2272>
>     > <http://10.0.3.9:6800/2272> submit_message osd_op_reply(20047
>     > rb.0.6040.238e1f29.000000000074 [set-alloc-hint object_size 4194304
>     > write_size 4194304,write 524288~524288] v1753'32513 uv32513 ondisk = 0)
>     > v6 remote, 10.0.2.5:0/1998047321 <http://10.0.2.5:0/1998047321>
>     <http://10.0.2.5:0/1998047321>, failed
>     > lossy con, dropping message 0x1667bc80
>     > 2016-03-28 17:04:03.535143 7f7333e6a700  0 -- 10.0.3.9:6800/2272 <http://10.0.3.9:6800/2272>
>     > <http://10.0.3.9:6800/2272> submit_message osd_op_reply(20048
>     > rb.0.6040.238e1f29.000000000074 [set-alloc-hint object_size 4194304
>     > write_size 4194304,write 1048576~524288] v1753'32514 uv32514 ondisk = 0)
>     > v6 remote, 10.0.2.5:0/1998047321 <http://10.0.2.5:0/1998047321>
>     <http://10.0.2.5:0/1998047321>, failed
>     > lossy con, dropping message 0x12b56e00
>     >
>     > ---
>     > Diego Castro / The CloudFather
>     > GetupCloud.com - Eliminamos a Gravidade
>     >
>     >
>     > _______________________________________________
>     > ceph-users mailing list
>     > ceph-users@xxxxxxxxxxxxxx <mailto:ceph-users@xxxxxxxxxxxxxx>
>     > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>     >
>     _______________________________________________
>     ceph-users mailing list
>     ceph-users@xxxxxxxxxxxxxx <mailto:ceph-users@xxxxxxxxxxxxxx>
>     http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> 
> 
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux