Fwd: write iops drops down after testing for some minutes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

I setup a ceph environment with Hammer version. I run benchmark for the rbd image with following command:

fio --ioengine=rbd --pool=performance_test  --rbdname=test1 --clientname=admin --iodepth=32 --direct=1  --rw=randwrite --bs=4k  --numjobs=4  --runtime=600 --ramp_time=100  --name=test --group_reporting

You can see, 100s warm up and 600s testing ( --runtime=600 --ramp_time=100 ) are using for the testing. At the first 300s testing, the write IOPS is stable to 5000. But after 300s testing, the write IOPS is not stable, sometimes the high IOPS is up to 4500,  the low IOPS drops down to 100. The IOPS jitter is very high, and is not stable.

Does anyone meet the similar issue? How to tune the performance and make it stable?

Thanks!

Peifeng Lin



--
Lin Pei Feng(林培峰)
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux