Rick; you mean Raid 0 environment right?
![]()
If you use raid 5 or raid 10 or some other more complex raid configuration most of the physical disks' abilities vanishes. (trim, discard etc..)
Only handful of hardware raid cards able to pass trim and discard commands to physical disks if the raid configuration is raid 0 or raid 1.
On Mon, Mar 7, 2016 at 9:21 AM, Ric Wheeler <rwheeler@xxxxxxxxxx> wrote:
It is perfectly reasonable and common to use hardware RAID cards in writeback mode under XFS (and under Ceph) if you configure them properly.
The key thing is that for writeback cache enabled, you need to make sure that the S-ATA drives' write cache itself is disabled. Also make sure that your file system is mounted with "barrier" enabled.
To check the backend write cache state on drives, you often need to use RAID card specific tools to query and set them.
Regards,
Ric
On 02/27/2016 07:20 AM, fangchen sun wrote:
Thank you for your response!
All my hosts have raid cards. Some raid cards are in pass-throughput mode, and the others are in write-back mode. I will set all raid cards pass-throughput mode and observe for a period of time.
Best Regards
sunspot
2016-02-25 20:07 GMT+08:00 Ferhat Ozkasgarli <ozkasgarli@xxxxxxxxx <mailto:ozkasgarli@xxxxxxxxx>>:
This has happened me before but in virtual machine environment.
The VM was KVM and storage was RBD. My problem was a bad cable in network.
You should check following details:
1-) Do you use any kind of hardware raid configuration? (Raid 0, 5 or 10)
Ceph does not work well on hardware raid systems. You should use raid
cards in HBA (non-raid) mode and let raid card pass-throughput the disk.
2-) Check your network connections
It mas seem a obvious solution but believe me network is one of the top
rated culprit in Ceph environments.
3-) If you are using SSD disk, make sure you use non-raid configuration.
On Tue, Feb 23, 2016 at 10:55 PM, fangchen sun <sunspot0105@xxxxxxxxx<mailto:sunspot0105@xxxxxxxxx>> wrote:
Dear all:
I have a ceph object storage cluster with 143 osd and 7 radosgw, and
choose XFS as the underlying file system.
I recently ran into a problem that sometimes a osd is marked down when
the returned value of the function "chain_setxattr()" is -117. I only
umount the disk and repair it with "xfs_repair".
os: centos 6.5
kernel version: 2.6.32
the log for dmesg command:
[41796028.532225] Pid: 1438740, comm: ceph-osd Not tainted
2.6.32-925.431.23.3.letv.el6.x86_64 #1
[41796028.532227] Call Trace:
[41796028.532255] [<ffffffffa01e1e5f>] ? xfs_error_report+0x3f/0x50 [xfs]
[41796028.532276] [<ffffffffa01d506a>] ? xfs_da_read_buf+0x2a/0x30 [xfs]
[41796028.532296] [<ffffffffa01e1ece>] ?
xfs_corruption_error+0x5e/0x90 [xfs]
[41796028.532316] [<ffffffffa01d4f4c>] ? xfs_da_do_buf+0x6cc/0x770 [xfs]
[41796028.532335] [<ffffffffa01d506a>] ? xfs_da_read_buf+0x2a/0x30 [xfs]
[41796028.532359] [<ffffffffa0206fc7>] ? kmem_zone_alloc+0x77/0xf0 [xfs]
[41796028.532380] [<ffffffffa01d506a>] ? xfs_da_read_buf+0x2a/0x30 [xfs]
[41796028.532399] [<ffffffffa01bc481>] ?
xfs_attr_leaf_addname+0x61/0x3d0 [xfs]
[41796028.532426] [<ffffffffa01bc481>] ?
xfs_attr_leaf_addname+0x61/0x3d0 [xfs]
[41796028.532455] [<ffffffffa01ff187>] ? xfs_trans_add_item+0x57/0x70
[xfs]
[41796028.532476] [<ffffffffa01cc208>] ? xfs_bmbt_get_all+0x18/0x20 [xfs]
[41796028.532495] [<ffffffffa01bcbb4>] ? xfs_attr_set_int+0x3c4/0x510
[xfs]
[41796028.532517] [<ffffffffa01d4f5b>] ? xfs_da_do_buf+0x6db/0x770 [xfs]
[41796028.532536] [<ffffffffa01bcd81>] ? xfs_attr_set+0x81/0x90 [xfs]
[41796028.532560] [<ffffffffa0216cc3>] ? __xfs_xattr_set+0x43/0x60 [xfs]
[41796028.532584] [<ffffffffa0216d31>] ? xfs_xattr_user_set+0x11/0x20
[xfs]
[41796028.532592] [<ffffffff811aee92>] ? generic_setxattr+0xa2/0xb0
[41796028.532596] [<ffffffff811b134e>] ? __vfs_setxattr_noperm+0x4e/0x160
[41796028.532600] [<ffffffff81196b77>] ? inode_permission+0xa7/0x100
[41796028.532604] [<ffffffff811b151c>] ? vfs_setxattr+0xbc/0xc0
[41796028.532607] [<ffffffff811b15f0>] ? setxattr+0xd0/0x150
[41796028.532612] [<ffffffff8105af80>] ? __dequeue_entity+0x30/0x50
[41796028.532617] [<ffffffff8100988e>] ? __switch_to+0x26e/0x320
[41796028.532621] [<ffffffff8118aec0>] ? __sb_start_write+0x80/0x120
[41796028.532626] [<ffffffff8152912e>] ? thread_return+0x4e/0x760
[41796028.532630] [<ffffffff811b171d>] ? sys_fsetxattr+0xad/0xd0
[41796028.532633] [<ffffffff8100b072>] ? system_call_fastpath+0x16/0x1b
[41796028.532636] XFS (sdi1): Corruption detected. Unmount and run
xfs_repair
Any comments will be much appreciated!
Best Regards!
sunspot
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
