Hi Chris,
could you please send me your ceph.conf? I tried to set
"mon addr" but it looks like that it was ignored all the time.
Regards - Willi
Am 07.09.15 um 20:47 schrieb Chris
Taylor:
My monitors are only connected to the public network, not the
cluster network. Only the OSDs are connected to the cluster
network.
Take a look at the diagram here:
http://ceph.com/docs/master/rados/configuration/network-config-ref/
-Chris
On 09/07/2015 03:15 AM, Willi Fehler wrote:
Hi,
any ideas?
Many thanks,
Willi
Am 07.09.15 um 08:59 schrieb Willi
Fehler:
Hello,
I'm trying to setup my first Ceph Cluster on Hammer.
[root@linsrv002 ~]# ceph -v
ceph version 0.94.3
(95cefea9fd9ab740263bf8bb4796fd864d9afe2b)
[root@linsrv002 ~]# ceph -s
cluster 7a8cc185-d7f1-4dd5-9fe6-42cfd5d3a5b7
health HEALTH_OK
monmap e1: 3 mons at
{linsrv001=10.10.10.1:6789/0,linsrv002=10.10.10.2:6789/0,linsrv003=10.10.10.3:6789/0}
election epoch 256, quorum 0,1,2
linsrv001,linsrv002,linsrv003
mdsmap e60: 1/1/1 up {0=linsrv001=up:active}, 2
up:standby
osdmap e622: 9 osds: 9 up, 9 in
pgmap v1216: 384 pgs, 3 pools, 2048 MB data, 532
objects
6571 MB used, 398 GB / 404 GB avail
384 active+clean
My issue is that I have two networks a public network
192.168.0.0/24 and a cluster network 10.10.10.0/24 and my
monitors should listen on 192.168.0.0/24. Later I want to
use CephFS over the public network.
[root@linsrv002 ~]# cat /etc/ceph/ceph.conf
[global]
fsid = 7a8cc185-d7f1-4dd5-9fe6-42cfd5d3a5b7
mon_initial_members = linsrv001, linsrv002, linsrv003
mon_host = 10.10.10.1,10.10.10.2,10.10.10.3
auth_cluster_required = cephx
auth_service_required = cephx
auth_client_required = cephx
filestore_xattr_use_omap = true
mon_clock_drift_allowed = 1
public_network = 192.168.0.0/24
cluster_network = 10.10.10.0/24
[root@linsrv002 ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4
localhost4.localdomain4
::1 localhost localhost.localdomain localhost6
localhost6.localdomain6
10.10.10.1 linsrv001
10.10.10.2 linsrv002
10.10.10.3 linsrv003
I've deployed my first cluster with ceph-deploy. What should
I do to have :6789 to be listen on the public network?
Regards - Willi
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
|
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
