|
I have moved storage nodes to RHEL 7.1 and used the basic server install. I installed ceph-deploy and used the ceph.repo/epel.repo for installation of ceph 80.7. I have tried ceph-disk with issuing “zap” on the same command line as “prepare”
and on a separate command line immediately before the ceph-disk prepare. I consistently run into the partition errors and am unable to create OSD’s on RHEL 7.1. ceph-disk prepare --cluster ceph --cluster-uuid 373a09f7-2070-4d20-8504-c8653fb6db80 --fs-type xfs --zap-disk /dev/disk/by-id/wwn-0x500003959ba80a4e /dev/disk/by-id/wwn-0x500080d9101001d6-part1 Caution: invalid backup GPT header, but valid main header; regenerating backup header from main header. **************************************************************************** Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk verification and recovery are STRONGLY recommended. **************************************************************************** GPT data structures destroyed! You may now partition the disk using fdisk or other utilities. The operation has completed successfully. WARNING:ceph-disk:OSD will not be hot-swappable if journal is not the same device as the osd data The operation has completed successfully. meta-data="" isize=2048 agcount=4, agsize=244188597 blks = sectsz=512 attr=2, projid32bit=1 = crc=0 finobt=0 data = bsize=4096 blocks=976754385, imaxpct=5 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=0 log =internal log bsize=4096 blocks=476930, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 The operation has completed successfully. partx: /dev/disk/by-id/wwn-0x500003959ba80a4e: error adding partition 1 |
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
