Yup I think you are correct, I see this listed under issues https://github.com/ketor/ceph-dokan/issues/5 On Thu, Apr 30, 2015 at 12:58 PM, Gregory Farnum <greg@xxxxxxxxxxx> wrote: > On Thu, Apr 30, 2015 at 9:49 AM, James Devine <fxmulder@xxxxxxxxx> wrote: >> So I am trying to get ceph-dokan to work. Upon running it with >> ./ceph-dokan.exe -c ceph.conf -l e it indicates there was a mount >> error and the monitor it connects to logs cephx server client.admin: >> unexpected key: req.key=0 expected_key=d7901d515f6b0c61 >> >> According to the debug output attached ceph-dokan reads the config >> file and keyring fine. Any ideas where I might be going wrong? > > I haven't used or looked at dokan at all, but if the received key is 0 > then I'm guessing dokan isn't using the cephx security that the server > is expecting. And there was a note from the guys who did rados_dll > that they had to disable cephx — so perhaps dokan doesn't support > cephx at all and you need to disable it? I'm not sure, just spitting > into the wind here... ;) > -Greg _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |