ok, thx Robert - I expected that so this is fine then - just done it on 12 OSDs and all fine...
thx again
On 17 April 2015 at 23:38, Robert LeBlanc <robert@xxxxxxxxxxxxx> wrote:
If the journal file on the osd is a symlink to the partition and the OSD process is running, then the journal was created properly. The OSD would not start if the journal was not created.On Fri, Apr 17, 2015 at 2:43 PM, Andrija Panic <andrija.panic@xxxxxxxxx> wrote:_______________________________________________Hi all,when I run:ceph-deploy osd create SERVER:sdi:/dev/sdb5(sdi = previously ZAP-ed 4TB drive)
(sdb5 = previously manually created empty partition with fdisk)Is ceph-deploy going to create journal properly on sdb5 (something similar to: ceph-osd -i $ID --mkjournal ), or do I need to do something before this ?I have actually already run this command but havent seen any "mkjournal" commands in the outputOSD shows as up and in, but I have doubts if journal is fine (symlink does link to /dev/sdb5) but again...Any confimration is welcomedThanks,--Andrija Panić
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
Andrija Panić
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
