Re: Add monitor unsuccesful

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks I did everything as you mention and still have the same issue that hangs a lot:

[root@tauro ~]# ceph status
2015-03-12 11:40:50.441084 7f6e20336700  0 -- :/1005688 >> 192.168.4.35:6789/0 pipe(0x7f6e1c0239a0 sd=3 :0 s=1 pgs=0 cs=0 l=1 c=0x7f6e1c023c30).fault
2015-03-12 11:40:53.441517 7f6e20235700  0 -- :/1005688 >> 192.168.4.35:6789/0 pipe(0x7f6e10000c00 sd=3 :0 s=1 pgs=0 cs=0 l=1 c=0x7f6e10000e90).fault
2015-03-12 11:40:57.443038 7f6e20336700  0 -- :/1005688 >> 192.168.4.35:6789/0 pipe(0x7f6e100030e0 sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7f6e10003370).fault
^CError connecting to cluster: InterruptedOrTimeoutError
[root@tauro ~]#

After I saw that my monmap doesn’t have the new entry:

monmaptool: monmap file /tmp/monmap
epoch 0
fsid ddb39f8d-c30f-4172-aeca-30e553a5e4f1
last_changed 2015-03-12 11:22:20.811525
created 2015-03-12 11:22:20.811525
0: 192.168.4.35:6789/0 mon.aries
[root@tauro ~]#


It only has the initial monitor (mon.aries) the new one is called (mon.tauro), the last command before “…ceph-tauro/done” was "sudo ceph-mon --cluster ceph --mkfs -i tauro --keyring /tmp/ceph.mon.keyring --monmap /tmp/monmap” also I have tried to add to monmap with:

[root@tauro ~]# ceph mon add tauro 192.168.4.36:6789
2015-03-12 11:45:26.807504 7fc53077a700  0 -- :/1007053 >> 192.168.4.35:6789/0 pipe(0x7fc52c023970 sd=3 :0 s=1 pgs=0 cs=0 l=1 c=0x7fc52c023c00).fault
2015-03-12 11:45:29.807800 7fc530679700  0 -- :/1007053 >> 192.168.4.35:6789/0 pipe(0x7fc520000c00 sd=3 :0 s=1 pgs=0 cs=0 l=1 c=0x7fc520000e90).fault
^CError connecting to cluster: InterruptedOrTimeoutError

and also I tried from the initial monitor:

[root@aries ~]#  ceph mon add tauro 192.168.4.36:6789
2015-03-12 11:46:21.561523 7f7432ffd700  0 monclient: hunting for new mon
 

and it hangs forever, I tried at the same time to get the service up on tauro (new mon):


[root@tauro ~]# sudo /etc/init.d/ceph start mon.tauro
=== mon.tauro ===
Starting Ceph mon.tauro on tauro...
Running as unit run-7463.service.
Starting ceph-create-keys on tauro...
[root@tauro ~]#


and of course still have nothing =(


those were my entire lines:

vi /etc/ceph/ceph.conf

i[global]
fsid = ddb39f8d-c30f-4172-aeca-30e553a5e4f1
mon initial members = aries
mon host = 192.168.4.35

ceph-authtool --create-keyring /tmp/ceph.mon.keyring --gen-key -n mon. --cap mon 'allow *'
ceph-authtool --create-keyring /etc/ceph/ceph.client.admin.keyring --gen-key -n client.admin --set-uid=0 --cap mon 'allow *' --cap osd 'allow *' --cap mds 'allow'
ceph-authtool /tmp/ceph.mon.keyring --import-keyring /etc/ceph/ceph.client.admin.keyring
monmaptool --create --add aries 192.168.4.35 --fsid ddb39f8d-c30f-4172-aeca-30e553a5e4f1 /tmp/monmap
sudo mkdir /var/lib/ceph/mon/ceph-aries
ceph-mon --mkfs -i aries --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring
sudo touch /var/lib/ceph/mon/ceph-aries/done
sudo /etc/init.d/ceph start mon.aries

scp /etc/ceph/ceph.conf root@tauro:/etc/ceph/ceph.conf
scp /tmp/ceph.mon.keyring root@tauro:/tmp/ceph.mon.keyring
scp /tmp/monmap root@tauro:/tmp/monmap

mkdir /var/lib/ceph/mon/ceph-tauro
sudo ceph-mon --cluster ceph --mkfs -i tauro --keyring /tmp/ceph.mon.keyring --monmap /tmp/monmap
sudo ceph-mon -i tauro --mkfs --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring
sudo touch /var/lib/ceph/mon/ceph-tauro/done
sudo /etc/init.d/ceph start mon.tauro


=( 






Jesus Chavez

SYSTEMS ENGINEER-C.SALES

jeschave@xxxxxxxxx
Phone: +52 55 5267 3146
Mobile: +51 1 5538883255

CCIE - 44433


Cisco.com

        




  
Think before you print.

This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.

Please click here for Company Registration Information.





On Mar 12, 2015, at 10:33 AM, Jesus Chavez (jeschave) <jeschave@xxxxxxxxx> wrote:

Great!!!! :) so just 1 point more, step 4 in adding monitors (Add the new monitor to the Monitor map.) this command actually runs in the new monitor right?

Thank you so much!


Jesus Chavez

SYSTEMS ENGINEER-C.SALES

jeschave@xxxxxxxxx
Phone: +52 55 5267 3146
Mobile: +51 1 5538883255

CCIE - 44433

On Mar 12, 2015, at 10:06 AM, Robert LeBlanc <robert@xxxxxxxxxxxxx> wrote:

Add the new monitor to the Monitor map.

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux