Hello, If I understand you correctly, you're talking about the rbd cache on the client side. So assume that host or the cache SSD on if fail terminally. The client thinks its sync'ed are on the permanent storage (the actual ceph storage cluster), while they are only present locally. So restarting that service or VM on a different host now has to deal with likely crippling data corruption. Regards, Christian On Wed, 4 Mar 2015 08:26:52 -0000 Nick Fisk wrote: > Hi All, > > > > Is there anything in the pipeline to add the ability to write the librbd > cache to ssd so that it can safely ignore sync requests? I have seen a > thread a few years back where Sage was discussing something similar, but > I can't find anything more recent discussing it. > > > > I've been running lots of tests on our new cluster, buffered/parallel > performance is amazing (40K Read 10K write iops), very impressed. However > sync writes are actually quite disappointing. > > > > Running fio with 128k block size and depth=1, normally only gives me > about 300iops or 30MB/s. I'm seeing 2-3ms latency writing to SSD OSD's > and from what I hear that's about normal, so I don't think I have a ceph > config problem. For applications which do a lot of sync's, like ESXi > over iSCSI or SQL databases, this has a major performance impact. > > > > Traditional storage arrays work around this problem by having a battery > backed cache which has latency 10-100 times less than what you can > currently achieve with Ceph and an SSD . Whilst librbd does have a > writeback cache, from what I understand it will not cache syncs and so > in my usage case, it effectively acts like a write through cache. > > > > To illustrate the difference a proper write back cache can make, I put a > 1GB (512mb dirty threshold) flashcache in front of my RBD and tweaked > the flush parameters to flush dirty blocks at a large queue depth. The > same fio test (128k iodepth=1) now runs at 120MB/s and is limited by the > performance of SSD used by flashcache, as everything is stored as 4k > blocks on the ssd. In fact since everything is stored as 4k blocks, > pretty much all IO sizes are accelerated to max speed of the SSD. > Looking at iostat I can see all the IO's are getting coalesced into nice > large 512kb IO's at a high queue depth, which Ceph easily swallows. > > > > If librbd could support writing its cache out to SSD it would hopefully > achieve the same level of performance and having it integrated would be > really neat. > > > > Nick > > > > -- Christian Balzer Network/Systems Engineer chibi@xxxxxxx Global OnLine Japan/Fusion Communications http://www.gol.com/ _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |