Hi all, I try to compile and use Ceph on a cluster of Raspberry Pi single-board computers with Raspbian as operating system. I tried it this way: wget http://ceph.com/download/ceph-0.91.tar.bz2 tar -xvjf ceph-0.91.tar.bz2 cd ceph-0.91 ./autogen.sh ./configure --without-tcmalloc make -j2 But result, I got this error message: ... CC common/module.lo CXX common/Readahead.lo CXX common/Cycles.lo In file included from common/Cycles.cc:38:0: common/Cycles.h:76:2: error: #error No high-precision counter available for your OS/arch common/Cycles.h: In static member function 'static uint64_t Cycles::rdtsc()': common/Cycles.h:78:3: warning: no return statement in function returning non-void [-Wreturn-type] Makefile:13166: recipe for target 'common/Cycles.lo' failed make[3]: *** [common/Cycles.lo] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/usr/src/ceph-0.91/src' Makefile:17129: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/usr/src/ceph-0.91/src' Makefile:6645: recipe for target 'all' failed make[1]: *** [all] Error 2 make[1]: Leaving directory '/usr/src/ceph-0.91/src' Makefile:405: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 Is it possible at all to build and use Ceph on the ARMv6 architecture? Thanks for any help. Best Regards Christian Baun _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |