Hi I have stragne problem when I try to start radosgw on docker container. When I have single container with 1 radosgw process inside everyting is ok, I have good performance i think, for single test thread: 80 put/s for 4k objects and radosgw with debug enabled. When I start two containers on the same host, both radosgw processes consumes a lot of CPU, throughput drops to 1,5 put/s. > debug rgw = 20 > debug ms = 5 in logs repeates constantly > 2015-01-05 12:00:26.360182 7fd4d8c9e700 2 -- 10.145.10.222:0/1000013 >> 10.145.11.2:6804/30320 pipe(0x7fd554144720 sd=36 :38206 s=1 pgs=0 cs=0 l=1 c=0x7fd5540e0350). got newly_acked_seq 0 vs out_seq 0 > 2015-01-05 12:00:26.362571 7fd4d8799700 2 -- 10.145.10.222:0/1000013 >> 10.145.11.2:6804/30320 pipe(0x7fd554144720 sd=36 :38206 s=2 pgs=203558 cs=1 l=1 c=0x7fd5540e0350).reader couldn't read tag, Success >2015-01-05 12:00:26.362607 7fd4d8799700 2 -- 10.145.10.222:0/1000013 >> 10.145.11.2:6804/30320 pipe(0x7fd554144720 sd=36 :38206 s=2 pgs=203558 cs=1 l=1 c=0x7fd5540e0350).fault 0: Success Just after start this 2 containers both radosgw processes consumes for a while a lot of CPU without any test requests. Do you have any idea what can be wrong? Ceph version: 0.67.11 -- Regards Dominik _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |