Hi,
Yes, There are 3x ceph nodes. I installed diamond in all those nodes.
# rpm -qa | grep diamond diamond-3.4.67-0.noarch # pgrep -fl diamon 13746 /usr/bin/python /usr/bin/diamond -p /var/run/diamond.pid
Thanks.
— idzzy
On November 18, 2014 at 6:16:37 PM, Разоренов Александр (arazorenov@xxxxxxxxx) wrote:
Do you install diamond pack on all
nodes?
С уважением,
Разорёнов Александр
Ведущий специалист отдела мониторинга и технической
поддержки
тел.: +7 (495) 780-60-36
тел.: +7 (495) 780-60-35, доб. 340
e-mail: arazorenov@rutube.ru
http://rutube.ru/
129226, Москва
ул. Вильгельма Пика, д. 3, стр. 2
ЗАО «РУТЬЮБ», Газпром-Медиа Холдинг
From:
idzzy [mailto:idezebi@xxxxxxxxx]
Sent: Tuesday, November 18, 2014 12:11 PM
To: Разоренов Александр
Cc: ceph-users@xxxxxxxxxxxxxx
Subject: Re: Назад: RE: [ceph-users] calamari gui
I tried that, but there is not inactive nodes
in cluster setting page like below.
when I push
the button of host,cluster setting, config
browser, but
it’s no response.
On November 18, 2014 at 3:38:52 PM, Разоренов Александр (arazorenov@xxxxxxxxx)
wrote:
Hello, now you must go in settings tab in gui and you will see unactive nodes, you must activate this nodes after that your cluster will be connected to calamari
Пользователь idzzy <idezebi@xxxxxxxxx> писал:
Thank you for the advise.
I set manually on each ceph nodes like this.
# cat /etc/salt/minion.d/calamari.conf
master: {calamari server ip}
# service salt-minion restart
But when I access to gui, same error message is still being
output.
----------------------------------
New Calamari Installation
This appears to be the first time you have started Calamari and
there are no clusters currently configured.
3 Ceph servers are connected to Calamari, but no Ceph cluster has
been created yet. Please use ceph-deploy to create a cluster;
please see the Inktank Ceph Enterprise documentation for more
details.
----------------------------------
Hmm… Which point should I check further more?
On November 17, 2014 at 9:14:18 PM, Разоренов Александр (arazorenov@xxxxxxxxx)
wrote:
Yes, like it say in this manual
http://calamari.readthedocs.org/en/latest/operations/minion_connect.html
you must do this command on calamari server, but for me more easy
connect ceph nodes to calamari server manually
С уважением,
Разорёнов Александр
Ведущий специалист отдела мониторинга и технической
поддержки
тел.: +7 (495) 780-60-36
тел.: +7 (495) 780-60-35, доб. 340
e-mail: arazorenov@rutube.ru
http://rutube.ru/
129226, Москва
ул. Вильгельма Пика, д. 3, стр. 2
ЗАО «РУТЬЮБ», Газпром-Медиа Холдинг
I might misunderstand this. I executed this command on ceph node
like this. [ceph node]# ceph-deploy calamari connect {Calamari
Server}
But it seems this command should execute on calamari
server.
[calamari server]# ceph-deploy calamari connect {Ceph
Nodes}
Is this correct? I would like to know only this point.
On November 14, 2014 at 5:59:19 PM, idzzy (idezebi@xxxxxxxxx) wrote:
I see following message on calamari GUI.
----------------------------------
New Calamari Installation
This appears to be the first time you have started Calamari and
there are no clusters currently configured.
3 Ceph servers are connected to Calamari, but no Ceph cluster has
been created yet. Please use ceph-deploy to create a cluster;
please see the Inktank Ceph Enterprise documentation for more
details.
----------------------------------
And as next step, I executed below command to add ceph node to
calamari server.
But “no calamari-minion repo found” message is being
output.
----------------------------------
# ceph-deploy calamari connect 10.32.37.44
[ceph_deploy.conf][DEBUG ] found configuration file at:
/root/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked (1.5.9):
/usr/bin/ceph-deploy calamari connect 10.32.37.44
[ceph_deploy][ERROR ] RuntimeError: no calamari-minion repo
found
----------------------------------
(10.32.37.44 is calamari server)
So I added the repository to ~/.cephdeploy.conf of ceph node like
this.
----------------------------------
name=ceph repo noarch packages
baseurl=http://ceph.com/rpm-emperor/el6/noarch
#baseurl=http://ceph.com/rpm-emperor/rhel6/x86_64/
gpgkey=https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/autobuild.asc
----------------------------------
Then run again, but following error is being output.
----------------------------------
# ceph-deploy calamari connect 10.32.37.44
[ceph_deploy.conf][DEBUG ] found configuration file at:
/root/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked (1.5.9):
/usr/bin/ceph-deploy calamari connect 10.32.37.44
Warning: Permanently added '10.32.37.44' (RSA) to the list of known
hosts.
[10.32.37.44][DEBUG ] connected to host: 10.32.37.44
[10.32.37.44][DEBUG ] detect platform information from remote
host
[ceph_deploy][ERROR ] RuntimeError: ImportError: No module named
ceph_deploy
----------------------------------
How can I proceed to add ceph node to calamari server and start to
use calamari guy?
Sorry this may be basically question, any advise will helpful for
me.
|
