You can set lower weight on full osds, or try changing the
osd_near_full_ratio parameter in your cluster from 85 to for example 89.
But i don't know what can go wrong when you do that.
2014-10-20 17:12 GMT+02:00 Wido den Hollander <wido@xxxxxxxx>:
On 10/20/2014 05:10 PM, Harald Rößler wrote:
> yes, tomorrow I will get the replacement of the failed disk, to get a new node with many disk will take a few days.
> No other idea?
>
If the disks are all full, then, no.
Sorry to say this, but it came down to poor capacity management. Never
let any disk in your cluster fill over 80% to prevent these situations.
Wido
> Harald Rößler
>
>
>> Am 20.10.2014 um 16:45 schrieb Wido den Hollander <wido@xxxxxxxx>:
>>
>> On 10/20/2014 04:43 PM, Harald Rößler wrote:
>>> Yes, I had some OSD which was near full, after that I tried to fix the problem with "ceph osd reweight-by-utilization", but this does not help. After that I set the near full ratio to 88% with the idea that the remapping would fix the issue. Also a restart of the OSD doesn’t help. At the same time I had a hardware failure of on disk. :-(. After that failure the recovery process start at "degraded ~ 13%“ and stops at 7%.
>>> Honestly I am scared in the moment I am doing the wrong operation.
>>>
>>
>> Any chance of adding a new node with some fresh disks? Seems like you
>> are operating on the storage capacity limit of the nodes and that your
>> only remedy would be adding more spindles.
>>
>> Wido
>>
>>> Regards
>>> Harald Rößler
>>>
>>>
>>>
>>>> Am 20.10.2014 um 14:51 schrieb Wido den Hollander <wido@xxxxxxxx>:
>>>>
>>>> On 10/20/2014 02:45 PM, Harald Rößler wrote:
>>>>> Dear All
>>>>>
>>>>> I have in them moment a issue with my cluster. The recovery process stops.
>>>>>
>>>>
>>>> See this: 2 active+degraded+remapped+backfill_toofull
>>>>
>>>> 156 pgs backfill_toofull
>>>>
>>>> You have one or more OSDs which are to full and that causes recovery to
>>>> stop.
>>>>
>>>> If you add more capacity to the cluster recovery will continue and finish.
>>>>
>>>>> ceph -s
>>>>> health HEALTH_WARN 188 pgs backfill; 156 pgs backfill_toofull; 4 pgs backfilling; 55 pgs degraded; 49 pgs recovery_wait; 297 pgs stuck unclean; recovery 111487/1488290 degraded (7.491%)
>>>>> monmap e2: 3 mons at {0=10.99.10.10:6789/0,12=10.99.10.22:6789/0,6=10.99.10.16:6789/0}, election epoch 332, quorum 0,1,2 0,12,6
>>>>> osdmap e6748: 24 osds: 23 up, 23 in
>>>>> pgmap v43314672: 3328 pgs: 3031 active+clean, 43 active+remapped+wait_backfill, 3 active+degraded+wait_backfill, 96 active+remapped+wait_backfill+backfill_toofull, 31 active+recovery_wait, 19 active+degraded+wait_backfill+backfill_toofull, 36 active+remapped, 3 active+remapped+backfilling, 18 active+remapped+backfill_toofull, 6 active+degraded+remapped+wait_backfill, 15 active+recovery_wait+remapped, 21 active+degraded+remapped+wait_backfill+backfill_toofull, 1 active+recovery_wait+degraded, 1 active+degraded+remapped+backfilling, 2 active+degraded+remapped+backfill_toofull, 2 active+recovery_wait+degraded+remapped; 1698 GB data, 5206 GB used, 971 GB / 6178 GB avail; 24382B/s rd, 12411KB/s wr, 320op/s; 111487/1488290 degraded (7.491%)
>>>>>
>>>>>
>>>>> I have tried to restart all OSD in the cluster, but does not help to finish the recovery of the cluster.
>>>>>
>>>>> Have someone any idea
>>>>>
>>>>> Kind Regards
>>>>> Harald Rößler
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> ceph-users mailing list
>>>>> ceph-users@xxxxxxxxxxxxxx
>>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>>>
>>>>
>>>>
>>>> --
>>>> Wido den Hollander
>>>> Ceph consultant and trainer
>>>> 42on B.V.
>>>>
>>>> Phone: +31 (0)20 700 9902
>>>> Skype: contact42on
>>>> _______________________________________________
>>>> ceph-users mailing list
>>>> ceph-users@xxxxxxxxxxxxxx
>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>
>>
>>
>> --
>> Wido den Hollander
>> Ceph consultant and trainer
>> 42on B.V.
>>
>> Phone: +31 (0)20 700 9902
>> Skype: contact42on
>
--
Wido den Hollander
Ceph consultant and trainer
42on B.V.
Phone: +31 (0)20 700 9902
Skype: contact42on
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
2014-10-20 17:12 GMT+02:00 Wido den Hollander <wido@xxxxxxxx>:
On 10/20/2014 05:10 PM, Harald Rößler wrote:
> yes, tomorrow I will get the replacement of the failed disk, to get a new node with many disk will take a few days.
> No other idea?
>
If the disks are all full, then, no.
Sorry to say this, but it came down to poor capacity management. Never
let any disk in your cluster fill over 80% to prevent these situations.
Wido
> Harald Rößler
>
>
>> Am 20.10.2014 um 16:45 schrieb Wido den Hollander <wido@xxxxxxxx>:
>>
>> On 10/20/2014 04:43 PM, Harald Rößler wrote:
>>> Yes, I had some OSD which was near full, after that I tried to fix the problem with "ceph osd reweight-by-utilization", but this does not help. After that I set the near full ratio to 88% with the idea that the remapping would fix the issue. Also a restart of the OSD doesn’t help. At the same time I had a hardware failure of on disk. :-(. After that failure the recovery process start at "degraded ~ 13%“ and stops at 7%.
>>> Honestly I am scared in the moment I am doing the wrong operation.
>>>
>>
>> Any chance of adding a new node with some fresh disks? Seems like you
>> are operating on the storage capacity limit of the nodes and that your
>> only remedy would be adding more spindles.
>>
>> Wido
>>
>>> Regards
>>> Harald Rößler
>>>
>>>
>>>
>>>> Am 20.10.2014 um 14:51 schrieb Wido den Hollander <wido@xxxxxxxx>:
>>>>
>>>> On 10/20/2014 02:45 PM, Harald Rößler wrote:
>>>>> Dear All
>>>>>
>>>>> I have in them moment a issue with my cluster. The recovery process stops.
>>>>>
>>>>
>>>> See this: 2 active+degraded+remapped+backfill_toofull
>>>>
>>>> 156 pgs backfill_toofull
>>>>
>>>> You have one or more OSDs which are to full and that causes recovery to
>>>> stop.
>>>>
>>>> If you add more capacity to the cluster recovery will continue and finish.
>>>>
>>>>> ceph -s
>>>>> health HEALTH_WARN 188 pgs backfill; 156 pgs backfill_toofull; 4 pgs backfilling; 55 pgs degraded; 49 pgs recovery_wait; 297 pgs stuck unclean; recovery 111487/1488290 degraded (7.491%)
>>>>> monmap e2: 3 mons at {0=10.99.10.10:6789/0,12=10.99.10.22:6789/0,6=10.99.10.16:6789/0}, election epoch 332, quorum 0,1,2 0,12,6
>>>>> osdmap e6748: 24 osds: 23 up, 23 in
>>>>> pgmap v43314672: 3328 pgs: 3031 active+clean, 43 active+remapped+wait_backfill, 3 active+degraded+wait_backfill, 96 active+remapped+wait_backfill+backfill_toofull, 31 active+recovery_wait, 19 active+degraded+wait_backfill+backfill_toofull, 36 active+remapped, 3 active+remapped+backfilling, 18 active+remapped+backfill_toofull, 6 active+degraded+remapped+wait_backfill, 15 active+recovery_wait+remapped, 21 active+degraded+remapped+wait_backfill+backfill_toofull, 1 active+recovery_wait+degraded, 1 active+degraded+remapped+backfilling, 2 active+degraded+remapped+backfill_toofull, 2 active+recovery_wait+degraded+remapped; 1698 GB data, 5206 GB used, 971 GB / 6178 GB avail; 24382B/s rd, 12411KB/s wr, 320op/s; 111487/1488290 degraded (7.491%)
>>>>>
>>>>>
>>>>> I have tried to restart all OSD in the cluster, but does not help to finish the recovery of the cluster.
>>>>>
>>>>> Have someone any idea
>>>>>
>>>>> Kind Regards
>>>>> Harald Rößler
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> ceph-users mailing list
>>>>> ceph-users@xxxxxxxxxxxxxx
>>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>>>
>>>>
>>>>
>>>> --
>>>> Wido den Hollander
>>>> Ceph consultant and trainer
>>>> 42on B.V.
>>>>
>>>> Phone: +31 (0)20 700 9902
>>>> Skype: contact42on
>>>> _______________________________________________
>>>> ceph-users mailing list
>>>> ceph-users@xxxxxxxxxxxxxx
>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>
>>
>>
>> --
>> Wido den Hollander
>> Ceph consultant and trainer
>> 42on B.V.
>>
>> Phone: +31 (0)20 700 9902
>> Skype: contact42on
>
--
Wido den Hollander
Ceph consultant and trainer
42on B.V.
Phone: +31 (0)20 700 9902
Skype: contact42on
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
