That's the same version that I'm using.
Did you check the other points I mentioned:
- check *all* ceph host are running the same version
- restart 'em all to be sure
I did think that your 'auth list' output looked strange, but I guessed
that you have cut out the osd and mon info before placing it in the
message...might be useful to see all of that too. Obviously something is
not quite right.
On 14/10/14 12:05, lakshmi k s wrote:
I have Ceph 0.85 version. I can still talk to this gateway node like
below using swift v1.0. Note that this user was created using
radosgw-admin..
swift -V 1.0 -A http://gateway.ex.com/auth/v1.0 -U s3User:swiftUser -K
CRV8PeotaW204nE9IyutoVTcnr+2Uw8M8DQuRP7i list
my-Test
I am at total loss now.
On Monday, October 13, 2014 3:25 PM, Mark Kirkwood
<mark.kirkwood@xxxxxxxxxxxxxxx> wrote:
Well that certainly looks ok. So entries in [client.radosgw.gateway]
*should* work. If they are not then that points to something else not
setup right on the ceph or radosgw side.
What version of ceph is this?
I'd do the following:
- check all ceph hosts have the same ceph version running
- restart all the hosts (ahem - assuming this is not a prod setup)
If you have not done so before, check the gateway works with all the
keystone stuff disabled (i.e create a swift user using radosgw-admin and
check you can upload a file etc as that user). *Then* enable the
keystone bits...restart the gateway and try again.
There are a lot of fiddly bits involved in the setup of radosgw - and it
is real easy to to have one missed or not done correctly, which trips
you up later!
Regards
Mark
On 14/10/14 05:06, lakshmi k s wrote:
>
> ceph auth list on gateway node has the following. I think I am using the
> correct name in ceph.conf.
>
> gateway@gateway <mailto:gateway@gateway>:~$ ceph auth list
> installed auth entries:
> client.admin
> key: AQBL3SxUiMplMxAAjrL6oT+0Q5JtdrD90toXqg==
> caps: [mds] allow
> caps: [mon] allow *
> caps: [osd] allow *
> client.radosgw.gateway
> key: AQCI5C1UUH7iOhAAWazAeqVLetIDh+CptBtRrQ==
> caps: [mon] allow rwx
> caps: [osd] allow rwx
>
>
>
>
> On Sunday, October 12, 2014 8:02 PM, Mark Kirkwood
> <mark.kirkwood@xxxxxxxxxxxxxxx
<mailto:mark.kirkwood@xxxxxxxxxxxxxxx>> wrote:
>
>
> Ah, yes. So your gateway is called something other than:
>
> [client.radosgw.gateway]
>
> So take a look at what
>
> $ ceph auth list
>
> says (run from your rgw), it should pick up the correct name. Then
> correct your ceph.conf, restart and see what the rgw log looks like as
> you edge ever so closer to having it work :-)
>
> regards
>
> Mark
>
> On 13/10/14 12:27, lakshmi k s wrote:
> > Yes Mark, I did restart all the services - radosgw, ceph, apache2. And
> > yes, it never attempted to use keystone right from the beginning.
> > Interestingly, when I moved the rgw keystone url =
> > http://192.0.2.21:5000 <http://192.0.2.21:5000/>
> <http://192.0.2.21:5000/><http://192.0.2.21:5000/> under global
section in
> > ceph.conf file, I see 500 internal error on both the nodes and
following
> > logs were captured. This looks similar to yours at least during
initial
> > handshake.
> >
> > 2014-10-12 16:08:21.015597 7fca80fa9700 1 ====== starting new request
> > req=0x7fcac002ae10 =====
> > 2014-10-12 16:08:21.015621 7fca80fa9700 2 req 3:0.000026::GET
> > /swift/v1::initializing
> > 2014-10-12 16:08:21.015665 7fca80fa9700 10 ver=v1 first= req=
> > 2014-10-12 16:08:21.015669 7fca80fa9700 10 s->object=<NULL>
> s->bucket=<NULL>
> > 2014-10-12 16:08:21.015676 7fca80fa9700 2 req 3:0.000081:swift:GET
> > /swift/v1::getting op
> > 2014-10-12 16:08:21.015682 7fca80fa9700 2 req 3:0.000087:swift:GET
> > /swift/v1:list_buckets:authorizing
> > 2014-10-12 16:08:21.015688 7fca80fa9700 20
> > token_id=7bfb869419044bec8c258e75830d55a2
> > 2014-10-12 16:08:21.015742 7fca80fa9700 20 sending request to
> > http://192.0.2.21:5000/v2.0/tokens
> > 2014-10-12 16:08:33.001640 7fca9d7e2700 0 Keystone token parse error:
> > malformed json
> > 2014-10-12 16:08:33.002756 7fca9d7e2700 10 failed to authorize request
> > 2014-10-12 16:08:33.003598 7fca9d7e2700 2 req 1:75.081031:swift:GET
> > /swift/v1:list_buckets:http status=401
> > 2014-10-12 16:08:33.003863 7fca9d7e2700 1 ====== req done
> > req=0x7fcac0010670 http_status=401 ======
> > 2014-10-12 16:08:33.004414 7fca9d7e2700 20 process_request()
returned -1
> >
>
>
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
