[Ceph-community] Pgs are in stale+down+peering state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Stale means that the primary OSD for the PG went down and the status is stale.  They all seem to be from OSD.12... Seems like something is preventing that OSD from reporting to the mon?

sage

On September 22, 2014 7:51:48 AM EDT, Sahana Lokeshappa <Sahana.Lokeshappa at sandisk.com> wrote:
>Hi all,
>
>I used command  'ceph osd thrash ' command and after all osds are up
>and in, 3  pgs are in  stale+down+peering state
>
>sudo ceph -s
>    cluster 99ffc4a5-2811-4547-bd65-34c7d4c58758
>health HEALTH_WARN 3 pgs down; 3 pgs peering; 3 pgs stale; 3 pgs stuck
>inactive; 3 pgs stuck stale; 3 pgs stuck unclean
>monmap e1: 3 mons at
>{rack2-ram-1=10.242.42.180:6789/0,rack2-ram-2=10.242.42.184:6789/0,rack2-ram-3=10.242.42.188:6789/0},
>election epoch 2008, quorum 0,1,2 rack2-ram-1,rack2-ram-2,rack2-ram-3
>     osdmap e17031: 64 osds: 64 up, 64 in
>      pgmap v76728: 2148 pgs, 2 pools, 4135 GB data, 1033 kobjects
>            12501 GB used, 10975 GB / 23476 GB avail
>                2145 active+clean
>                   3 stale+down+peering
>
>sudo ceph health detail
>HEALTH_WARN 3 pgs down; 3 pgs peering; 3 pgs stale; 3 pgs stuck
>inactive; 3 pgs stuck stale; 3 pgs stuck unclean
>pg 0.4d is stuck inactive for 341048.948643, current state
>stale+down+peering, last acting [12,56,27]
>pg 0.49 is stuck inactive for 341048.948667, current state
>stale+down+peering, last acting [12,6,25]
>pg 0.1c is stuck inactive for 341048.949362, current state
>stale+down+peering, last acting [12,25,23]
>pg 0.4d is stuck unclean for 341048.948665, current state
>stale+down+peering, last acting [12,56,27]
>pg 0.49 is stuck unclean for 341048.948687, current state
>stale+down+peering, last acting [12,6,25]
>pg 0.1c is stuck unclean for 341048.949382, current state
>stale+down+peering, last acting [12,25,23]
>pg 0.4d is stuck stale for 339823.956929, current state
>stale+down+peering, last acting [12,56,27]
>pg 0.49 is stuck stale for 339823.956930, current state
>stale+down+peering, last acting [12,6,25]
>pg 0.1c is stuck stale for 339823.956925, current state
>stale+down+peering, last acting [12,25,23]
>
>
>Please, can anyone explain why pgs are in this state.
>Sahana Lokeshappa
>Test Development Engineer I
>SanDisk Corporation
>3rd Floor, Bagmane Laurel, Bagmane Tech Park
>C V Raman nagar, Bangalore 560093
>T: +918042422283
>Sahana.Lokeshappa at SanDisk.com
>
>
>________________________________
>
>PLEASE NOTE: The information contained in this electronic mail message
>is intended only for the use of the designated recipient(s) named
>above. If the reader of this message is not the intended recipient, you
>are hereby notified that you have received this message in error and
>that any review, dissemination, distribution, or copying of this
>message is strictly prohibited. If you have received this communication
>in error, please notify the sender by telephone or e-mail (as shown
>above) immediately and destroy any and all copies of this message in
>your possession (whether hard copies or electronically stored copies).
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Ceph-community mailing list
>Ceph-community at lists.ceph.com
>http://lists.ceph.com/listinfo.cgi/ceph-community-ceph.com

-- 
Sent from Kaiten Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ceph.com/pipermail/ceph-users-ceph.com/attachments/20140922/465c9deb/attachment.htm>


[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux