Hi Mike, Thanks for your quick response. When I try mount on the storage node this is what I get: *root at cephnode4:~# mount* */dev/sda1 on / type ext4 (rw,errors=remount-ro)* *proc on /proc type proc (rw,noexec,nosuid,nodev)* *sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)* *none on /sys/fs/fuse/connections type fusectl (rw)* *none on /sys/kernel/debug type debugfs (rw)* *none on /sys/kernel/security type securityfs (rw)* *udev on /dev type devtmpfs (rw,mode=0755)* *devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)* *tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)* *none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)* *none on /run/shm type tmpfs (rw,nosuid,nodev)* */dev/sdb on /mnt/CephStorage1 type ext4 (rw)* */dev/sdc on /mnt/CephStorage2 type ext4 (rw)* */dev/sda7 on /mnt/Storage type ext4 (rw)* */dev/sda2 on /boot type ext4 (rw)* */dev/sda5 on /home type ext4 (rw)* */dev/sda6 on /mnt/CephStorage type ext4 (rw)* Is there anything wrong in the setup I have? I dont have any 'ceph' related mounts. Thanks, Sharmila On Wed, May 21, 2014 at 8:34 PM, Mike Dawson <mike.dawson at cloudapt.com>wrote: > Perhaps: > > # mount | grep ceph > > - Mike Dawson > > > > On 5/21/2014 11:00 AM, Sharmila Govind wrote: > >> Hi, >> I am new to Ceph. I have a storage node with 2 OSDs. Iam trying to >> figure out to which pyhsical device/partition each of the OSDs are >> attached to. Is there are command that can be executed in the storage >> node to find out the same. >> >> Thanks in Advance, >> Sharmila >> >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users at lists.ceph.com >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.ceph.com/pipermail/ceph-users-ceph.com/attachments/20140521/948eb637/attachment.htm>
 |