On Tue, Dec 24, 2013 at 8:16 AM, Kuo Hugo <tonytkdk@xxxxxxxxx> wrote: > Hi folks, > > After some more tests. I can not addressed the bottleneck currently. Never > hit CPU bound. > > > OSD op threads : 60 > rgw_thread_pool_size : 300 > pg = 2000 > pool size = 3 > > Try to find the max concurrency of 1KB write of this cluster > Rados bench 1000~5000+ about 3000 reqs/sec > > mon.0 [INF] 2053 kB/s wr, 2053 op/s > mon.0 [INF] 2093 kB/s wr, 2093 op/s > mon.0 [INF] 3380 kB/s wr, 3380 op/s > > So that I think the IOPS for single pool is around 3000 op/s > > > > With 30 OSD and journals on 3 SSD by ssbench > > 1KB Result in : 1200 reqs/sec > > 4MB object get 150MB/sec > > > With 30 OSD and journals on 30 HDDs > > 1KB ssbench Result in : 450 reqs/sec > > mon.0 [INF] 1650 kB/s rd, 413 kB/s wr, 5783 op/s > mon.0 [INF] 1651 kB/s rd, 409 kB/s wr, 5760 op/s > mon.0 [INF] 1708 kB/s rd, 423 kB/s wr, 5959 op/s > > > 1KB Rados Bench result in : 900 reqs/sec > > mon.0 [INF] 803 kB/s wr, 803 op/s > mon.0 [INF] 806 kB/s wr, 806 op/s > mon.0 [INF] 911 kB/s wr, 911 op/s > > > 4MB object get 350MB/s throughPUT > > Based on the above result, SSD helps for small object but not that good for > object size which over 1MB. > > > Why 1KB object benchmark from ssbench generated much more ops than rados > bench? > From my perspective, > > 1. Every request is producing auth/bucket/object-put operation from RadosGW > to Rados. > 2. Need to read bucket data > Writes generate much more operations, whereas reads should be roughly the same. Write operations need to take care of the index update and the old object cleanup, whereas reads go directly to the object. Unless you have cache disabled. > > How to improve the performance(?) : > > 1. Higher concurrency will reduce the performance of RadosGW : > > Cuncurrency 100 > > Count: 13283 ( 0 error; 0 retries: 0.00%) Average requests per > second: 436.1 > mon.0 [INF] 1650 kB/s rd, 413 kB/s wr, 5783 op/s > mon.0 [INF] 1651 kB/s rd, 409 kB/s wr, 5760 op/s > mon.0 [INF] 1708 kB/s rd, 423 kB/s wr, 5959 op/s > > > Concurrency 200 > > Count: 7027 ( 17 error; 475 retries: 6.76%) Average requests per > second: 190.0 > mon.0 [INF] 2001 kB/s rd, 492 kB/s wr, 6959 op/s > mon.0 [INF] 1877 kB/s rd, 457 kB/s wr, 6498 op/s > mon.0 [INF] 1332 kB/s rd, 330 kB/s wr, 4647 op/s > > Higher concurrency will have more error and retries. > I'm not sure the bottleneck is on Http server or Rados cluster maximum > IOPS in this case. > Does any chance to make it faster by tuning Apache's setting? The CPU > util on this node > > 2. For hitting network maximum bandwidth, more HDDs or journal with SSD will > help? > > > Any suggestion would be appreciate ~ > > Try bumping up the 'objecter inflight op bytes' configurable. Currently it's set to 100M, so try setting it to something like 1G (1073741824). You can also try playing with the max inflight ops (objecter inflight ops), it's currently at 1024. One way to see if your gateway is throttling is to connecto to the admin socket (ceph --admin-daemon=<path to admin socket> help), and dump the perf counters. If there's any throttle with wait times on it then it's throttling. Yehuda > > > > > 2013/12/24 Kuo Hugo <tonytkdk@xxxxxxxxx> >> >> Hi folks, >> >> >> There're 30 HDDs on three 24 threads severs. Each has 2 10G NICs. one for >> public and one for cluster . A dedicated 32threads server for RadosGW. >> >> My setting is to achieve same availability as Swift. So that the pool >> size=3 anf min_size=2. for all RadosGW related pools. Each pool's pg is set >> to 2000. >> >> Everything is working well but performance. >> >> Round1) Journals all a SSD with 10 partitions on each server. >> >> It's faster for small object(1KB). 1100reqs/sec under concurrency=100. >> But there's a problem, the total throughPUT has only 150MB/sec. >> >> >> Round2) Journals on HDDs itself >> >> Better throughPU in this way. The Rados Bench shows 300~400MB/sec. >> But the 1KB reqs/sec is really bad about 400reqs/sec. >> >> >> And ..... the reqs/sec reduced along with the number of concurrency. >> For example 500 concurrency can only handle 120reqs/sec. >> >> Dose anyone use RadosGW for high concurrency cases in real? >> Could you please let me know which http server are you running for RadosGW >> ? >> How will you leverage all these equipments for building a most efficiency >> Rados+RadosGW cluster with Swift API ? >> >> For reference, with same HW and similar setup, Swift can get 1600reqs/sec >> with 1000 concurrency. >> >> > > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |