Alfredo,
I started that way, but I run into an error:
$ ceph-deploy install baxter[ceph_deploy.cli][INFO ] Invoked (1.3.3): /usr/bin/ceph-deploy install baxter[ceph_deploy.install][DEBUG ] Installing stable version emperor on cluster ceph hosts baxter[ceph_deploy.install][DEBUG ] Detecting platform for host baxter ...[baxter][DEBUG ] connected to host: baxter[baxter][DEBUG ] detect platform information from remote host[baxter][DEBUG ] detect machine type[ceph_deploy.install][INFO ] Distro info: debian 7.0 wheezy[baxter][INFO ] installing ceph on baxter[baxter][INFO ] Running command: sudo env DEBIAN_FRONTEND=noninteractive apt-get -q install --assume-yes ca-certificates[baxter][DEBUG ] Reading package lists...[baxter][DEBUG ] Building dependency tree...[baxter][DEBUG ] Reading state information...[baxter][DEBUG ] ca-certificates is already the newest version.[baxter][DEBUG ] 0 upgraded, 0 newly installed, 0 to remove and 85 not upgraded.[baxter][INFO ] Running command: sudo wget -O release.asc https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc[baxter][WARNIN] --2013-12-03 16:32:45-- https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc[baxter][WARNIN] HTTP request sent, awaiting response... 200 OK[baxter][WARNIN] Length: unspecified [text/plain][baxter][WARNIN] Saving to: `release.asc'[baxter][WARNIN][baxter][WARNIN] 0K . 1.06M=0.002s[baxter][WARNIN][baxter][WARNIN] 2013-12-03 16:32:53 (1.06 MB/s) - `release.asc' saved [1752][baxter][WARNIN][baxter][INFO ] Running command: sudo apt-key add release.asc[baxter][DEBUG ] OK[baxter][DEBUG ] add ceph deb repo to sources.list[baxter][INFO ] Running command: sudo apt-get -q update[baxter][DEBUG ] Get:1 http://mirrordirector.raspbian.org wheezy Release.gpg [490 B][baxter][DEBUG ] Hit http://raspberrypi.collabora.com wheezy Release.gpg[baxter][DEBUG ] Get:2 http://archive.raspberrypi.org wheezy Release.gpg [490 B][baxter][DEBUG ] Get:3 http://mirrordirector.raspbian.org wheezy Release [14.4 kB][baxter][DEBUG ] Hit http://raspberrypi.collabora.com wheezy Release[baxter][DEBUG ] Get:4 http://ceph.com wheezy Release.gpg [836 B][baxter][DEBUG ] Get:5 http://archive.raspberrypi.org wheezy Release [7224 B][baxter][DEBUG ] Hit http://raspberrypi.collabora.com wheezy/rpi armhf Packages[baxter][DEBUG ] Get:6 http://mirrordirector.raspbian.org wheezy/main armhf Packages [7414 kB][baxter][DEBUG ] Get:7 http://archive.raspberrypi.org wheezy/main armhf Packages [12.1 kB][baxter][DEBUG ] Get:8 http://ceph.com wheezy Release [5984 B][baxter][DEBUG ] Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en[baxter][DEBUG ] Get:9 http://ceph.com wheezy/main armhf Packages [1010 B][baxter][DEBUG ] Ign http://archive.raspberrypi.org wheezy/main Translation-en[baxter][DEBUG ] Ign http://ceph.com wheezy/main Translation-en[baxter][DEBUG ] Hit http://mirrordirector.raspbian.org wheezy/contrib armhf Packages[baxter][DEBUG ] Hit http://mirrordirector.raspbian.org wheezy/non-free armhf Packages[baxter][DEBUG ] Hit http://mirrordirector.raspbian.org wheezy/rpi armhf Packages[baxter][DEBUG ] Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en[baxter][DEBUG ] Ign http://mirrordirector.raspbian.org wheezy/main Translation-en[baxter][DEBUG ] Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en[baxter][DEBUG ] Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en[baxter][DEBUG ] Fetched 7456 kB in 47s (157 kB/s)[baxter][DEBUG ] Reading package lists...[baxter][INFO ] Running command: sudo env DEBIAN_FRONTEND=noninteractive DEBIAN_PRIORITY=critical apt-get -q -o Dpkg::Options::=--force-confnew --no-install-recommends --assume-yes install -- ceph ceph-mds ceph-common ceph-fs-common gdisk[baxter][WARNIN] E: Unable to locate package ceph-mds[baxter][WARNIN] E: Unable to locate package ceph-fs-common[baxter][DEBUG ] Reading package lists...[baxter][DEBUG ] Building dependency tree...[baxter][DEBUG ] Reading state information...[baxter][ERROR ] RuntimeError: command returned non-zero exit status: 100[ceph_deploy][ERROR ] RuntimeError: Failed to execute command: env DEBIAN_FRONTEND=noninteractive DEBIAN_PRIORITY=critical apt-get -q -o Dpkg::Options::=--force-confnew --no-install-recommends --assume-yes install -- ceph ceph-mds ceph-common ceph-fs-common gdisk
When running manually:
$ env DEBIAN_FRONTEND=noninteractive DEBIAN_PRIORITY=critical apt-get -q -o Dpkg::Options::=--force-confnew --no-install-recommends --assume-yes install -- ceph ceph-mds ceph-common ceph-fs-common gdiskE: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?
Maybe this is supposed to be a sudo command?
$ sudo env DEBIAN_FRONTEND=noninteractive DEBIAN_PRIORITY=critical apt-get -q -o Dpkg::Options::=--force-confnew --no-install-recommends --assume-yes install -- ceph ceph-mds ceph-common ceph-fs-common gdiskReading package lists...Building dependency tree...Reading state information...E: Unable to locate package ceph-mdsE: Unable to locate package ceph-fs-common
This was the stage where I tried to install ceph with just apt-get install manually.
Shlomo
-----------------------------
Shlomo Dubrowin
The Solution to the water crisis in Israel:
# According to WikiPedia, the Kinneret can hold
# 4 km^3, so FULL here is in cubit meters
FULL="4000"
while [ "$LEVEL" -lt "$FULL" ]; do
cat /sea/med /sea/red |\
grep -vi "salt" |\
tee /sea/dead /lake/kinneret
LEVEL=`du -c /sea/dead /lake/kinneret | grep total | awk '{print $1}'`
done
Shlomo Dubrowin
The Solution to the water crisis in Israel:
# According to WikiPedia, the Kinneret can hold
# 4 km^3, so FULL here is in cubit meters
FULL="4000"
while [ "$LEVEL" -lt "$FULL" ]; do
cat /sea/med /sea/red |\
grep -vi "salt" |\
tee /sea/dead /lake/kinneret
LEVEL=`du -c /sea/dead /lake/kinneret | grep total | awk '{print $1}'`
done
On Tue, Dec 3, 2013 at 4:29 PM, Alfredo Deza <alfredo.deza@xxxxxxxxxxx> wrote:
On Tue, Dec 3, 2013 at 9:21 AM, Shlomo Dubrowin <shlomo@xxxxxxxxxxxx> wrote:Was that added manually? ceph-deploy can take care of handling the
> Alfredo,
>
> Thank you for your response. I simply did apt-get install ceph on the
> nodes.
>
> My /etc/apt/sources.list.d/ceph.list contains:
>
> deb http://ceph.com/debian-emperor/ wheezy main
>
sources list for you.
It is possible that you have something else in that machine that is
saying that 0.43 is the version you should
be getting.
Have you tried to install with ceph-deploy?:
ceph-deploy install baxter
>
> and the versions I received are what I got.
>
> Shlomo
>
> -----------------------------
> Shlomo Dubrowin
>
> The Solution to the water crisis in Israel:
>
> # According to WikiPedia, the Kinneret can hold
> # 4 km^3, so FULL here is in cubit meters
> FULL="4000"
> while [ "$LEVEL" -lt "$FULL" ]; do
> cat /sea/med /sea/red |\
> grep -vi "salt" |\
> tee /sea/dead /lake/kinneret
> LEVEL=`du -c /sea/dead /lake/kinneret | grep total | awk '{print $1}'`
> done
>
>
> On Tue, Dec 3, 2013 at 4:15 PM, Alfredo Deza <alfredo.deza@xxxxxxxxxxx>
> wrote:
>>
>> On Tue, Dec 3, 2013 at 8:55 AM, Shlomo Dubrowin <shlomo@xxxxxxxxxxxx>
>> wrote:
>> > I'm trying to deploy Ceph on a group of Raspberry Pis using the
>> > procedure
>> > documented in: http://ceph.com/docs/master/start/quick-ceph-deploy/
>> >
>> > There used to be a site: http://ceph.com/docs/master/start/quick-start/
>> > but
>> > that page is no longer valid.
>> >
>> > The first thing I noticed is that the command lsb_release -sc specified
>> > in
>> > the Ceph Deploy setup provides n/a even though the answer should be
>> > wheezy.
>> > I manually changed the /etc/apt/sources.list.d/ceph.list to specify
>> > wheezy.
>> >
>> > I've installed ceph-deploy and setup the keys to communicate between the
>> > deploy Raspberry Pi and all the Raspberry Pis including the system
>> > reunning
>> > ceph-deploy.
>> >
>> > When I tried to run ceph-deploy install <node1> the installation failed.
>> > I went to each node and installed ceph manually and I see the versions
>> > are:
>> >
>> > $ ceph-deploy --version
>> > 1.3.3
>> >
>> > $ ceph --version
>> > ceph version 0.43 (commit:9fa8781c0147d66fcef7c2dd0e09cd3c69747d37)
>> >
>> >
>> > All the nodes have the same ceph version.
>>
>> That looks like a *very* old ceph version. Is there any reason you are
>> using 0.43 as opposed to the latest one?
>>
>> How did you installed Ceph on those nodes?
>> >
>> > When I try to run a command, I get errors:
>> >
>> > $ ceph-deploy mon create baxter
>> > [ceph_deploy.cli][INFO ] Invoked (1.3.3): /usr/bin/ceph-deploy mon
>> > create
>> > baxter
>> > [ceph_deploy.mon][DEBUG ] Deploying mon, cluster ceph hosts baxter
>> > [ceph_deploy.mon][DEBUG ] detecting platform for host baxter ...
>> > [baxter][DEBUG ] connected to host: baxter
>> > [baxter][DEBUG ] detect platform information from remote host
>> > [baxter][DEBUG ] detect machine type
>> > [ceph_deploy.mon][INFO ] distro info: debian 7.0 wheezy
>> > [baxter][DEBUG ] determining if provided host has same hostname in
>> > remote
>> > [baxter][DEBUG ] get remote short hostname
>> > [baxter][DEBUG ] deploying mon to baxter
>> > [baxter][DEBUG ] get remote short hostname
>> > [baxter][DEBUG ] remote hostname: baxter
>> > [baxter][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
>> > [baxter][DEBUG ] create the mon path if it does not exist
>> > [baxter][DEBUG ] checking for done path:
>> > /var/lib/ceph/mon/ceph-baxter/done
>> > [baxter][DEBUG ] done path does not exist:
>> > /var/lib/ceph/mon/ceph-baxter/done
>> > [baxter][INFO ] creating keyring file:
>> > /var/lib/ceph/tmp/ceph-baxter.mon.keyring
>> > [baxter][DEBUG ] create the monitor keyring file
>> > [baxter][INFO ] Running command: sudo ceph-mon --cluster ceph --mkfs -i
>> > baxter --keyring /var/lib/ceph/tmp/ceph-baxter.mon.keyring
>> > [baxter][WARNIN] too many arguments: [--cluster,ceph]
>> > [baxter][WARNIN] usage: ceph-mon -i monid [--mon-data=""> >> > [flags]
>> > [baxter][WARNIN] --debug_mon n
>> > [baxter][WARNIN] debug monitor level (e.g. 10)
>> > [baxter][WARNIN] --mkfs
>> > [baxter][WARNIN] build fresh monitor fs
>> > [baxter][DEBUG ] --conf/-c Read configuration from the given
>> > configuration file
>> > [baxter][DEBUG ] -d Run in foreground, log to stderr.
>> > [baxter][DEBUG ] -f Run in foreground, log to usual
>> > location.
>> > [baxter][DEBUG ] --id/-i set ID portion of my name
>> > [baxter][DEBUG ] --name/-n set name (TYPE.ID)
>> > [baxter][DEBUG ] --version show version and quit
>> > [baxter][DEBUG ]
>> > [baxter][DEBUG ] --debug_ms N
>> > [baxter][DEBUG ] set message debug level (e.g. 1)
>> > [baxter][ERROR ] RuntimeError: command returned non-zero exit status: 1
>> > [ceph_deploy.mon][ERROR ] Failed to execute command: ceph-mon --cluster
>> > ceph
>> > --mkfs -i baxter --keyring /var/lib/ceph/tmp/ceph-baxter.mon.keyring
>> > [ceph_deploy][ERROR ] GenericError: Failed to create 1 monitors
>> >
>> >
>> > If I try to run the same command as the user ceph on the local machine,
>> > I
>> > get the same error:
>> >
>> > $ ceph-mon --cluster ceph --mkfs -i baxter --keyring
>> > /var/lib/ceph/tmp/ceph-baxter.mon.keyring
>> > failed to open log file '/var/log/ceph/mon.baxter.log': (13) Permission
>> > denied
>> > too many arguments: [--cluster,ceph]
>> > usage: ceph-mon -i monid [--mon-data="" [flags]
>> > --debug_mon n
>> > debug monitor level (e.g. 10)
>> > --mkfs
>> > build fresh monitor fs
>> > --conf/-c Read configuration from the given configuration file
>> > -d Run in foreground, log to stderr.
>> > -f Run in foreground, log to usual location.
>> > --id/-i set ID portion of my name
>> > --name/-n set name (TYPE.ID)
>> > --version show version and quit
>> >
>> > --debug_ms N
>> > set message debug level (e.g. 1)
>> >
>> >
>> >
>> > This makes me think that the ceph-deploy installed doesn't work with the
>> > ceph installed on each node.
>> >
>> > So I guess I have 2 questions:
>> >
>> > How can I determine which ceph-deploy goes with which ceph and how can I
>> > correct this apparent mismatch?
>>
>> I don't think there was a ceph-deploy per-se that would've worked for
>> that Ceph version.
>>
>> I believe that ceph-deploy is very backwards compatible for a few Ceph
>> versions. At the very least we should
>> fully support the latest 3 major versions and we special case a few
>> commands depending on the version installed.
>>
>> But like I mentioned, the Ceph version you have installed seems like a
>> very very old one.
>>
>> > Should I be looking at just using local ceph commands to configure this
>> > by
>> > hand? Are there instructions on how to do this by hand?
>>
>> If you must have that version I don't think there is any option here
>> but to do it by hand and avoid ceph-deploy.
>>
>> For docs, I think that might be even more difficult to do as you would
>> need to go to the tag for that version and look at the docs
>> for that tag in the repository.
>>
>> Then again, what is the reason for using that version?
>>
>> >
>> > Thank you.
>> >
>> > Shlomo
>> >
>> > -----------------------------
>> > Shlomo Dubrowin
>> >
>> > The Solution to the water crisis in Israel:
>> >
>> > # According to WikiPedia, the Kinneret can hold
>> > # 4 km^3, so FULL here is in cubit meters
>> > FULL="4000"
>> > while [ "$LEVEL" -lt "$FULL" ]; do
>> > cat /sea/med /sea/red |\
>> > grep -vi "salt" |\
>> > tee /sea/dead /lake/kinneret
>> > LEVEL=`du -c /sea/dead /lake/kinneret | grep total | awk '{print $1}'`
>> > done
>> >
>> > _______________________________________________
>> > ceph-users mailing list
>> > ceph-users@xxxxxxxxxxxxxx
>> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>> >
>
>
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
