|
Hi All, I did a fresh install of Ceph (this might be like 10th or 11th install) on 4 new VMs (one admin, one MON and two OSDs) built from CentOS 6.4 (x64) .iso , did a yum update on all of them. They are all running on vmware
ESXi 5.1.0. I did everything sage et al suggested (i.e. creation of /ceph/osd* and making sure /etc/ceph is present on all nodes. /etc/ceph gets created all the ceph-deploy install and contains rbdmap FYI). Unusually, I ended up with the same problem while
activating OSDs (the last 4 lines keep going on and on forever): 2013-11-06 14:37:39,626 [ceph_deploy.cli][INFO ] Invoked (1.3): /usr/bin/ceph-deploy osd activate ceph-node2-osd0-centos-6-4:/ceph/osd0 ceph-node3-osd1-centos-6-4:/ceph/osd1 2013-11-06 14:37:39,627 [ceph_deploy.osd][DEBUG ] Activating cluster ceph disks ceph-node2-osd0-centos-6-4:/ceph/osd0: ceph-node3-osd1-centos-6-4:/ceph/osd1: 2013-11-06 14:37:39,901 [ceph-node2-osd0-centos-6-4][DEBUG ] connected to host: ceph-node2-osd0-centos-6-4 2013-11-06 14:37:39,902 [ceph-node2-osd0-centos-6-4][DEBUG ] detect platform information from remote host 2013-11-06 14:37:39,917 [ceph-node2-osd0-centos-6-4][DEBUG ] detect machine type 2013-11-06 14:37:39,925 [ceph_deploy.osd][INFO ] Distro info: CentOS 6.4 Final 2013-11-06 14:37:39,925 [ceph_deploy.osd][DEBUG ] activating host ceph-node2-osd0-centos-6-4 disk /ceph/osd0 2013-11-06 14:37:39,925 [ceph_deploy.osd][DEBUG ] will use init type: sysvinit 2013-11-06 14:37:39,925 [ceph-node2-osd0-centos-6-4][INFO ] Running command: sudo ceph-disk-activate --mark-init sysvinit --mount /ceph/osd0 2013-11-06 14:37:40,145 [ceph-node2-osd0-centos-6-4][ERROR ] 2013-11-06 14:37:41.075310 7fac2414c700 0 -- :/1029546 >> 10.12.0.70:6789/0 pipe(0x7fac20024480
sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7fac200246e0).fault 2013-11-06 14:37:43,167 [ceph-node2-osd0-centos-6-4][ERROR ] 2013-11-06 14:37:44.071697 7fac1ebfd700 0 -- :/1029546 >> 10.12.0.70:6789/0 pipe(0x7fac14000c00
sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7fac14000e60).fault 2013-11-06 14:37:46,140 [ceph-node2-osd0-centos-6-4][ERROR ] 2013-11-06 14:37:47.071938 7fac2414c700 0 -- :/1029546 >> 10.12.0.70:6789/0 pipe(0x7fac14003010
sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7fac14003270).fault 2013-11-06 14:37:50,165 [ceph-node2-osd0-centos-6-4][ERROR ] 2013-11-06 14:37:51.071245 7fac1ebfd700 0 -- :/1029546 >> 10.12.0.70:6789/0 pipe(0x7fac14003a70
sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7fac14003cd0).fault It might be bad luck but I want to try a manual installation without ceph-deploy because it seems I am jinxed with ceph-deploy. Could anyone please forward me the steps. I am happy to share the ceph.log with
anyone who would like to research on this error but I don’t a have clue. Thanks a lot! Narendra Trivedi | savviscloud This message contains information which may be confidential and/or privileged. Unless you are the intended recipient (or authorized to receive for the intended recipient), you may not read, use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail and delete the message and any attachment(s) thereto without retaining any copies. |
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
