Re: ceph creating stuck inactive and unclean

["Juan Vega" <juan.vega@xxxxxxxxxxx>]

Thanks for the response. They are on different hosts. I already tried adding more hosts, the whole 9 of them, but they never finished creating either, so I started over and did only two but same result.

 

If anything comes to mind, or if you are aware of a step by step guide (without ceph-deploy), I would appreciate the link to it.

 

Thanks,

 

Juan Vega

 

From: Lincoln Bryant [mailto:lincolnb@xxxxxxxxxxxx]
Sent: Sunday, November 3, 2013 11:05 AM
To: Juan Vega; ceph-users@xxxxxxxx
Subject: Re: ceph creating stuck inactive and unclean

 

Hi Juan,

Are the two OSDs that you started with on the same host? I've seen the same problem, which fixed itself after I added more OSDs on a separate host.

Cheers,
Lincoln

On 11/3/2013 12:09 PM, Juan Vega wrote:

Ceph Users,

I'm trying to create a cluster with 9 OSDs manually (withouth

ceph-deploy). I started with only 2, and will be adding more afterwards.

The problem is that the cluster never finished 'creating', even though

the OSDs are up and in:

vegaj@ServerB2-exper:~/cephcluster$ ceph -c ceph.conf -w

  cluster 31843595-d34f-4506-978a-88d44eef9999

   health HEALTH_WARN 192 pgs stuck inactive; 192 pgs stuck unclean

   monmap e1: 1 mons at {serverB2-exper=192.168.100.2:6789/0}, election

epoch 2, quorum 0 serverB2-exper

   osdmap e12: 2 osds: 2 up, 2 in

    pgmap v759: 192 pgs: 192 creating; 0 bytes data, 2436 MB used, 206

GB / 220 GB avail

   mdsmap e1: 0/0/1 up

2013-11-03 10:02:35.221325 mon.0 [INF] pgmap v759: 192 pgs: 192

creating; 0 bytes data, 2436 MB used, 206 GB / 220 GB avail

2013-11-03 10:04:35.242818 mon.0 [INF] pgmap v760: 192 pgs: 192

creating; 0 bytes data, 2436 MB used, 206 GB / 220 GB avail

I'm not using authentication. My ceph.conf is as follows:

[global]

fsid = 31843595-d34f-4506-978a-88d44eef9999

mon_initial_members = serverB2-exper

mon_host = 192.168.100.2

osd_journal_size = 1024

filestore_xattr_use_omap = true

auth cluster required = none

auth service required = none

auth client required = none

auth supported = none

Am I missing something?

Thanks,

Juan Vega

_______________________________________________

ceph-users mailing list

ceph-users@xxxxxxxxxxxxxx

http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

 

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com