>-----Original Message----- >From: Yehuda Sadeh [mailto:yehuda@xxxxxxxxxxx] >Sent: Friday, September 27, 2013 9:30 AM >To: Gruher, Joseph R >Cc: ceph-users@xxxxxxxxxxxxxx >Subject: Re: failure starting radosgw after setting up object >storage > >On Wed, Sep 25, 2013 at 2:07 PM, Gruher, Joseph R ><joseph.r.gruher@xxxxxxxxx> wrote: >> Hi all- >> >> >> >> I am following the object storage quick start guide. I have a cluster >> with two OSDs and have followed the steps on both. Both are failing >> to start radosgw but each in a different manner. All the previous >> steps in the quick start guide appeared to complete successfully. Any >> tips on how to debug from here? Thanks! >> >> >> >> >> >> OSD1: >> >> >> >> ceph@cephtest05:/etc/ceph$ sudo /etc/init.d/radosgw start >> >> ceph@cephtest05:/etc/ceph$ >> >> >> >> ceph@cephtest05:/etc/ceph$ sudo /etc/init.d/radosgw status >> >> /usr/bin/radosgw is not running. >> >> ceph@cephtest05:/etc/ceph$ >> >> >> >> ceph@cephtest05:/etc/ceph$ cat /var/log/ceph/radosgw.log >> >> ceph@cephtest05:/etc/ceph$ >> >> >> >> >> >> OSD2: >> >> >> >> ceph@cephtest06:/etc/ceph$ sudo /etc/init.d/radosgw start >> >> Starting client.radosgw.gateway... >> >> 2013-09-25 14:03:01.235789 7f713d79d780 -1 WARNING: libcurl doesn't >> support >> curl_multi_wait() >> >> 2013-09-25 14:03:01.235797 7f713d79d780 -1 WARNING: cross zone / >> region transfer performance may be affected >> >> ceph@cephtest06:/etc/ceph$ >> >> >> >> ceph@cephtest06:/etc/ceph$ sudo /etc/init.d/radosgw status >> >> /usr/bin/radosgw is not running. >> >> ceph@cephtest06:/etc/ceph$ >> >> >> >> ceph@cephtest06:/etc/ceph$ cat /var/log/ceph/radosgw.log >> >> 2013-09-25 14:03:01.235760 7f713d79d780 0 ceph version 0.67.3 >> (408cd61584c72c0d97b774b3d8f95c6b1b06341a), process radosgw, pid 13187 >> >> 2013-09-25 14:03:01.235789 7f713d79d780 -1 WARNING: libcurl doesn't >> support >> curl_multi_wait() >> >> 2013-09-25 14:03:01.235797 7f713d79d780 -1 WARNING: cross zone / >> region transfer performance may be affected >> >> 2013-09-25 14:03:01.245786 7f713d79d780 0 librados: >> client.radosgw.gateway authentication error (1) Operation not >> permitted >> >> 2013-09-25 14:03:01.246526 7f713d79d780 -1 Couldn't init storage >> provider >> (RADOS) > > >This means that the radosgw process cannot connect to the cluster due to >user / key set up. Make sure that the user for radosgw exists, and that the >ceph keyring file (on the radosgw side) has the correct credentials set. > > >Yehuda Thanks for the response. I will look into these. Is it possible you could provide more detail on how to check these? Sorry, still fairly new to Ceph (and object storage in general). Thanks! > >> >> ceph@cephtest06:/etc/ceph$ >> >> >> >> >> >> For reference, I think cluster health is OK: >> >> >> >> ceph@cephtest06:/etc/ceph$ sudo ceph status >> >> cluster a45e6e54-70ef-4470-91db-2152965deec5 >> >> health HEALTH_WARN clock skew detected on mon.cephtest03, >> mon.cephtest04 >> >> monmap e1: 3 mons at >> {cephtest02=10.0.0.2:6789/0,cephtest03=10.0.0.3:6789/0,cephtest04=10.0 >> .0.4:6789/0}, election epoch 6, quorum 0,1,2 >> cephtest02,cephtest03,cephtest04 >> >> osdmap e9: 2 osds: 2 up, 2 in >> >> pgmap v439: 192 pgs: 192 active+clean; 0 bytes data, 72548 KB >> used, 1998 GB / 1999 GB avail >> >> mdsmap e1: 0/0/1 up >> >> >> >> ceph@cephtest06:/etc/ceph$ sudo ceph health >> >> HEALTH_WARN clock skew detected on mon.cephtest03, mon.cephtest04 >> >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@xxxxxxxxxxxxxx >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |