On 2013/9/10 4:57, Samuel Just wrote:
That's normal, each osd listens on a few different ports for different reasons.
-Sam
On Mon, Sep 9, 2013 at 12:27 AM, Timofey Koolin <timofey@xxxxxxxxx> wrote:
I use ceph 0.67.2.
When I start
ceph-osd -i 0
or
ceph-osd -i 1
it start one process, but it process open few tcp-ports, is it normal?
netstat -nlp | grep ceph
tcp 0 0 10.11.0.73:6789 0.0.0.0:* LISTEN
1577/ceph-mon - mon
tcp 0 0 10.11.0.73:6800 0.0.0.0:* LISTEN
3649/ceph-osd - osd.0
tcp 0 0 10.11.0.73:6801 0.0.0.0:* LISTEN
3649/ceph-osd - osd.0
tcp 0 0 10.11.0.73:6802 0.0.0.0:* LISTEN
3649/ceph-osd - osd.0
tcp 0 0 10.11.0.73:6803 0.0.0.0:* LISTEN
3649/ceph-osd - osd.0
tcp 0 0 10.11.0.73:6804 0.0.0.0:* LISTEN
3764/ceph-osd - osd.1
tcp 0 0 10.11.0.73:6805 0.0.0.0:* LISTEN
3764/ceph-osd - osd.1
tcp 0 0 10.11.0.73:6808 0.0.0.0:* LISTEN
3764/ceph-osd - osd.1
tcp 0 0 10.11.0.73:6809 0.0.0.0:* LISTEN
3764/ceph-osd - osd.1
--
Blog: www.rekby.ru
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
four port for each osd? or it changes in 0.67.2
it should be three like
http://ceph.com/docs/master/rados/configuration/network-config-ref/#osd-ip-tables
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
