On Fri, Aug 16, 2013 at 12:20 PM, Aquino, BenX O <benx.o.aquino@xxxxxxxxx> wrote: > Thanks for the response; > > Here's the version: > > root@ubuntuceph700athf1:/etc/ceph# aptitude versions ceph-deploy > Package ceph-deploy: > i 1.0-1 stable 500 > > > > I notice that you did have a ceph-deploy release the day after my evaluation, so yes, I'll definitely try this again in the near future. > Yep, there has been a massive amount of improvements in the past 3 weeks, I highly encourage you to update :) > Regards, > -ben > > > ________________________________________ > From: Alfredo Deza [alfredo.deza@xxxxxxxxxxx] > Sent: Friday, August 16, 2013 7:31 AM > To: Aquino, BenX O > Cc: ceph-users@xxxxxxxxxxxxxx > Subject: Re: CEPH-DEPLOY TRIALS/EVALUATION RESULT ON CEPH VERSION 61.7 > > On Fri, Aug 9, 2013 at 12:05 PM, Aquino, BenX O <benx.o.aquino@xxxxxxxxx> wrote: >> CEPH-DEPLOY EVALUATION ON CEPH VERSION 61.7 >> >> ADMINNODE: >> >> root@ubuntuceph900athf1:~# ceph -v >> >> ceph version 0.61.7 (8f010aff684e820ecc837c25ac77c7a05d7191ff) >> >> root@ubuntuceph900athf1:~# >> >> >> >> SERVERNODE: >> >> root@ubuntuceph700athf1:/etc/ceph# ceph -v >> >> ceph version 0.61.7 (8f010aff684e820ecc837c25ac77c7a05d7191ff) >> >> root@ubuntuceph700athf1:/etc/ceph# >> >> >> >> ===============================================================: >> >> Trial-1 of using ceph-deploy results: >> (http://ceph.com/docs/next/start/quick-ceph-deploy/) >> >> >> >> My trial-1 scenario is using ceph-deploy to replace 2 OSD's (osd.2 and >> OSD.11) of a ceph node. >> >> >> >> Obesrvation: >> >> ceph-deploy creating a symbolic-links ceph-0-->ceph-2 dir and >> ceph-1--->ceph-11 dir. >> >> I did not ran into any errors or issue in this trials. >> >> >> >> once concern: >> >> --ceph deploy did not update linux fstab of mount point of osd data. >> >> >> >> ======================================================================================= >> >> >> >> Trial 2: (http://ceph.com/docs/next/start/quick-ceph-deploy/) >> >> >> >> I notice my node did not have any contents in >> /var/lib/ceph/boostrap-{osd}|{mds} . >> >> Result: FAILURE TO MOVE FORWARD BEYOND THIS STEP >> >> >> >> Tip from http://ceph.com/docs/next/start/quick-ceph-deploy/ >> >> If you don’t have these keyrings, you may not have created a monitor >> successfully, >> >> or you may have a problem with your network connection. >> >> Ensure that you complete this step such that you have the foregoing keyrings >> before proceeding further. >> >> >> >> Tip from (http://ceph.com/docs/next/start/quick-ceph-deploy/: >> >> You may repeat this procedure. If it fails, check to see if the >> /var/lib/ceph/boostrap-{osd}|{mds} directories on the server node have >> keyrings. >> >> If they do not have keyrings, try adding the monitor again; then, return to >> this step. >> >> >> >> My WORKAROUND1: >> >> COPIED CONTENTS OF /var/lib/ceph/boostrap-{osd}|{mds} FROM ANOTHER NODE >> >> >> >> My WORKAROUND2: >> >> USED CREATE A NEW CLUSTER PROCEDURE with CEPH-DEPLOY to create missing >> keyrings. >> >> >> >> =============================: >> >> TRIAL-3: Attemp to build a new cluster/1-Node using ceph deploy: >> >> >> >> RESULT FAILED TO GO BEYOND THE ERROR LOGS BELOW: >> >> >> >> root@ubuntuceph900athf1:~/my-cluster# ceph-deploy osd prepare >> ubuntuceph700athf1:sde1:/var/lib/ceph/journal/osd.0.journal >> >> ceph-disk-prepare -- /dev/sde1 /var/lib/ceph/journal/osd.0.journal returned >> 1 >> >> meta-data=/dev/sde1 isize=2048 agcount=4, agsize=30524098 >> blks >> >> = sectsz=512 attr=2, projid32bit=0 >> >> data = bsize=4096 blocks=122096390, imaxpct=25 >> >> = sunit=0 swidth=0 blks >> >> naming =version 2 bsize=4096 ascii-ci=0 >> >> log =internal log bsize=4096 blocks=59617, version=2 >> >> = sectsz=512 sunit=0 blks, lazy-count=1 >> >> realtime =none extsz=4096 blocks=0, rtextents=0 >> >> >> >> WARNING:ceph-disk:OSD will not be hot-swappable if journal is not the same >> device as the osd data >> >> umount: /var/lib/ceph/tmp/mnt.iMsc1G: device is busy. >> >> (In some cases useful info about processes that use >> >> the device is found by lsof(8) or fuser(1)) >> >> ceph-disk: Unmounting filesystem failed: Command '['/bin/umount', '--', >> '/var/lib/ceph/tmp/mnt.iMsc1G']' returned non-zero exit status 1 >> >> >> >> ceph-deploy: Failed to create 1 OSDs >> >> >> >> root@ubuntuceph900athf1:~/my-cluster# ceph-deploy osd prepare >> ubuntuceph700athf1:sde1 >> >> ceph-disk-prepare -- /dev/sde1 returned 1 >> >> meta-data=/dev/sde1 isize=2048 agcount=4, agsize=30524098 >> blks >> >> = sectsz=512 attr=2, projid32bit=0 >> >> data = bsize=4096 blocks=122096390, imaxpct=25 >> >> = sunit=0 swidth=0 blks >> >> naming =version 2 bsize=4096 ascii-ci=0 >> >> log =internal log bsize=4096 blocks=59617, version=2 >> >> = sectsz=512 sunit=0 blks, lazy-count=1 >> >> realtime =none extsz=4096 blocks=0, rtextents=0 >> >> >> >> umount: /var/lib/ceph/tmp/mnt.0JxBp1: device is busy. >> >> (In some cases useful info about processes that use >> >> the device is found by lsof(8) or fuser(1)) >> >> ceph-disk: Unmounting filesystem failed: Command '['/bin/umount', '--', >> '/var/lib/ceph/tmp/mnt.0JxBp1']' returned non-zero exit status 1 >> >> >> >> ceph-deploy: Failed to create 1 OSDs >> >> root@ubuntuceph900athf1:~/my-cluster# ceph-deploy osd prepare >> ubuntuceph700athf1:sde1 >> >> ceph-disk-prepare -- /dev/sde1 returned 1 >> >> >> >> ceph-disk: Error: Device is mounted: /dev/sde1 >> >> >> >> ceph-deploy: Failed to create 1 OSDs >> >> >> >> >> >> Attempted on the local node: >> >> root@ubuntuceph700athf1:/etc/ceph# ceph-deploy osd prepare >> ubuntuceph700athf1:sde1:/var/lib/ceph/journal/osd.0.journal >> >> ceph-disk-prepare -- /dev/sde1 /var/lib/ceph/journal/osd.0.journal returned >> 1 >> >> ceph-disk: Error: Device is mounted: /dev/sde1 >> >> >> >> /dev/sde1 on /var/lib/ceph/tmp/mnt.GzZLAr type xfs (rw,noatime) >> >> >> >> RESULT: >> >> ceph-deploy complaints that osd drive is mounted, it was not mounted prior >> to running command, ceph-deploy mounted it, then complains that its mounted. >> >> >> >> >> >> root@ubuntuceph700athf1:/etc/ceph# ceph-deploy osd prepare >> ubuntuceph700athf1:sdf1:/var/lib/ceph/journal/osd.1.journal >> >> ceph-disk-prepare -- /dev/sdf1 /var/lib/ceph/journal/osd.1.journal returned >> 1 >> >> meta-data=/dev/sdf1 isize=2048 agcount=4, agsize=30524098 >> blks >> >> = sectsz=512 attr=2, projid32bit=0 >> >> data = bsize=4096 blocks=122096390, imaxpct=25 >> >> = sunit=0 swidth=0 blks >> >> naming =version 2 bsize=4096 ascii-ci=0 >> >> log =internal log bsize=4096 blocks=59617, version=2 >> >> = sectsz=512 sunit=0 blks, lazy-count=1 >> >> realtime =none extsz=4096 blocks=0, rtextents=0 >> >> >> >> WARNING:ceph-disk:OSD will not be hot-swappable if journal is not the same >> device as the osd data >> >> umount: /var/lib/ceph/tmp/mnt.BxJFZa: device is busy. >> >> (In some cases useful info about processes that use >> >> the device is found by lsof(8) or fuser(1)) >> >> ceph-disk: Unmounting filesystem failed: Command '['/bin/umount', '--', >> '/var/lib/ceph/tmp/mnt.BxJFZa']' returned non-zero exit status 1 >> >> >> >> ceph-deploy: Failed to create 1 OSDs >> >> root@ubuntuceph700athf1:/etc/ceph# >> >> >> >> RESULT: >> >> ceph-deploy complaints that osd drive is mounted, it was not mounted prior >> to running command, ceph-deploy mounted it, then complains that its mounted. >> >> > > What version of ceph-deploy are you using? Make sure you update as > we've made two releases in the past 10 days that fix a lot of issues. > >> >> >> >> >> >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@xxxxxxxxxxxxxx >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |