On 07/24/2013 03:24 PM, Gandalf Corvotempesta wrote:
Hi to all,
I would like to archieve a faul tollerance cluster with an infiniband network.
Actually, one rsocket is bound to a single IB port. In case of a
dual-port HBA, I have to use multiple rsockets to use both ports.
Is possible to configure ceph with multiple cluster addresses for each OSDs?
For example:
OSD1:
cluster addr1: 10.1.0.1
cluster addr1: 10.2.0.1
OSD2:
cluster addr1: 10.1.0.2
cluster addr1: 10.2.0.2
so that in case of one network failure, everything will be re-routed
to the second port/network ?
No, an OSD can only have one IP address in the OSDMap.
Same goes for the monitors, they can only have one IP address in the
monitor map.
Something like a standard multihoming network.
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Wido den Hollander
42on B.V.
Phone: +31 (0)20 700 9902
Skype: contact42on
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
