Check the logs. There was an error in the doc. It now requires monitor write permissions to create the pools for radosgw. I fixed it last Wednesday, I believe. On Mon, Jul 8, 2013 at 9:24 AM, Shain Miley <smiley@xxxxxxx> wrote: > What is the output of 'ceph auth list'? > > There should be an entry similar to this one: > > client.radosgw.gateway > key: AQB6H9NR6IcMJBAAZOuGdrKPjLXfkEXmNoOirw== > caps: [mds] allow > caps: [mon] allow rw > caps: [osd] allow rwx > > If it does not exist you will need to create it. > > Shain > > > > On 07/08/2013 12:08 PM, Howarth, Chris wrote: > > There is nothing in the radosgw logs. This led me to believe it is not > running. Should there be a daemon constantly running ? I assume so, but I > can't see one. The radosgw start script runs without error: > > > > # bash -xv /etc/rc.d/init.d/ceph-radosgw start > > ... > > ... > > + runuser -s /bin/bash apache -c 'ulimit -S -c 0 >/dev/null 2>&1 ; > /usr/bin/radosgw -n client.radosgw.gateway' > > + '[' 0 -eq 0 ']' > > + success 'radosgw -n client.radosgw.gateway startup' > > + '[' color '!=' verbose -a -z '' ']' > > + echo_success > > + '[' color = color ']' > > + echo -en '\033[60G' > > + echo -n '[' > > [+ '[' color = color ']' > > + echo -en '\033[0;32m' > > + echo -n ' OK ' > > OK + '[' color = color ']' > > + echo -en '\033[0;39m' > > + echo -n ']' > > ]+ echo -ne '\r' > > + return 0 > > + return 0 > > + echo 'Starting client.radosgw.gateway...' > > Starting client.radosgw.gateway... > > > > However there is no daemon running. I have tried just running what seems to > be the relevant part: > > > > runuser -s /bin/bash apache -c 'ulimit -S -c 0 >/dev/null 2>&1 ; > /usr/bin/radosgw -n client.radosgw.gateway' > > > > still no output or anything in the logs. Any suggestions at all ? > > > > many thanks > > > > Chris > > > > -----Original Message----- > From: Gregory Farnum [mailto:greg@xxxxxxxxxxx] > Sent: 05 July 2013 18:46 > To: Howarth, Chris [CCC-OT_IT] > Cc: Alvaro Izquierdo Jimeno; ceph-users@xxxxxxxx > Subject: Re: Getting started with RADOS Gateway > > > > I don't have much experience with the swift interface, but based on the 403 > you're getting it looks like everything is running. Have you checked the > apache logs and the radosgw log (/var/log/ceph/client.radosgw.0.log or > something) for clues? > > -Greg > > Software Engineer #42 @ http://inktank.com | http://ceph.com > > > > On Fri, Jul 5, 2013 at 4:00 AM, Howarth, Chris <chris.howarth@xxxxxxxx> > wrote: > >> Many thanks Alvaro. I have modified and still have the same issue (see > >> below). Could really do with a list of checks to be able to find out > >> which components of the radosgw are running correctly and which are not. > >> > >> > >> > >> # radosgw-admin subuser create --uid=gwuser1 --subuser=gwuser1:swift > >> --access=full > >> > >> { "user_id": "gwuser1", > >> > >> "display_name": "{Rados Gateway User1}", > >> > >> "email": "", > >> > >> "suspended": 0, > >> > >> "max_buckets": 1000, > >> > >> "auid": 0, > >> > >> "subusers": [ > >> > >> { "id": "gwuser1:swift", > >> > >> "permissions": "full-control"}], > >> > >> "keys": [ > >> > >> { "user": "gwuser1", > >> > >> "access_key": "B5CL8KIB8LYH55FDPYPS", > >> > >> "secret_key": "B5\/EEMuTaTkSU5sS1zol2OknBPch04ZZdh86GGTA"}], > >> > >> "swift_keys": [ > >> > >> { "user": "gwuser1:swift", > >> > >> "secret_key": "kVcKPg1QFu73emgrP7w6JrFs3tvZ4+gLISW+703K"}], > >> > >> "caps": []} > >> > >> > >> > >> # swift -V 1.0 -A http://10.40.99.165/auth -U gwuser1:swift -K > >> "kVcKPg1QFu73emgrP7w6JrFs3tvZ4+gLISW+703K" post chtest > >> > >> Auth GET failed: http://10.40.99.165:80/auth/ 403 Forbidden > >> > >> > >> > >> > >> > >> > >> > >> From: Alvaro Izquierdo Jimeno [mailto:aizquierdo@xxxxxxxx] > >> Sent: 05 July 2013 10:43 > >> To: Howarth, Chris [CCC-OT_IT]; ceph-users@xxxxxxxx > >> Subject: RE: Getting started with RADOS Gateway > >> > >> > >> > >> Hi, > >> > >> > >> > >> Maybe you forgot some step when creating the subuser, because you have > >> empty the subusers field, and you need an id and permisssions…. > >> > >> Something like that: > >> > >> "subusers": [ > >> > >> { "id": " gwuser1:swift", > >> > >> "permissions": "full-control"}], > >> > >> > >> > >> I think you need to do this step > >> > >> sudo radosgw-admin subuser create --uid=johndoe > >> --subuser=johndoe:swift --access=full > >> > >> > >> > >> > >> > >> > >> > >> De: ceph-users-bounces@xxxxxxxxxxxxxx > >> [mailto:ceph-users-bounces@xxxxxxxxxxxxxx] En nombre de Howarth, Chris > >> Enviado el: viernes, 05 de julio de 2013 10:03 > >> Para: ceph-users@xxxxxxxx > >> Asunto: Getting started with RADOS Gateway > >> > >> > >> > >> Hi – I “think” I have configured the rados gateway correctly on a > >> RHEL6 server using httpd-2.2.15-28.el6_4.x86_64, but an unable to > >> connect and am having a hard time tracking down where the problem is. > >> I am also unclear as to what to check for to validate my config. In > >> particular if I try to connect from a host: > >> > >> > >> > >> # swift -V 1.0 -A http://10.40.99.165/auth -U gwuser1:swift -K > >> "kVcKPg1QFu73emgrP7w6JrFs3tvZ4+gLISW+703K" post chtest > >> > >> Auth GET failed: http://10.40.99.165:80/auth/ 403 Forbidden > >> > >> > >> > >> The relevant configuration info is below. Any pointers would be very > >> much appreciated (and really cheer up my Friday). > >> > >> > >> > >> # radosgw-admin user info --uid=gwuser1 > >> > >> { "user_id": "gwuser1", > >> > >> "display_name": "{Rados Gateway User1}", > >> > >> "email": "", > >> > >> "suspended": 0, > >> > >> "max_buckets": 1000, > >> > >> "auid": 0, > >> > >> "subusers": [], > >> > >> "keys": [ > >> > >> { "user": "gwuser1", > >> > >> "access_key": "B5CL8KIB8LYH55FDPYPS", > >> > >> "secret_key": "B5\/EEMuTaTkSU5sS1zol2OknBPch04ZZdh86GGTA"}], > >> > >> "swift_keys": [ > >> > >> { "user": "gwuser1:swift", > >> > >> "secret_key": "kVcKPg1QFu73emgrP7w6JrFs3tvZ4+gLISW+703K"}], > >> > >> "caps": []} > >> > >> > >> > >> # tail -30 /etc/httpd/conf/httpd.conf > >> > >> # The first VirtualHost section is used for requests without a known > >> > >> # server name. > >> > >> # > >> > >> #FastCgiExternalServer /var/www/s3gw.fcgi -socket /tmp/radosgw.sock > >> > >> > >> > >> <VirtualHost *:80> > >> > >> ServerAdmin chris.howarth@xxxxxxxx > >> > >> DocumentRoot /var/www > >> > >> ServerName e8c3-dl360g7-09.nam.nsroot.net > >> > >> # ErrorLog logs/dummy-host.example.com-error_log > >> > >> # CustomLog logs/dummy-host.example.com-access_log common > >> > >> RewriteEngine On > >> > >> RewriteRule ^/([a-zA-Z0-9-_.]*)([/]?.*) > >> /s3gw.fcgi?page=$1¶ms=$2&%{QUERY_STRING} > >> [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] > >> > >> <IfModule mod_fastcgi.c> > >> > >> <Directory /var/www> > >> > >> Options +ExecCGI > >> > >> AllowOverride All > >> > >> SetHandler fastcgi-script > >> > >> Order allow,deny > >> > >> Allow from all > >> > >> AuthBasicAuthoritative Off > >> > >> </Directory> > >> > >> FastCgiExternalServer /var/www/s3gw.fcgi -socket /tmp/radosgw.sock > >> > >> </IfModule> > >> > >> AllowEncodedSlashes On > >> > >> ErrorLog /var/log/httpd/error.log > >> > >> CustomLog /var/log/httpd/access.log combined > >> > >> ServerSignature Off > >> > >> > >> > >> </VirtualHost> > >> > >> > >> > >> # cat /var/www/s3gw.fcgi > >> > >> #!/bin/sh > >> > >> exec /usr/bin/radosgw -c /etc/ceph/ceph.conf -n client.radosgw.gateway > >> > >> __________________________ > >> > >> Chris Howarth > >> > >> OS Platforms Engineering > >> > >> Citi Architecture & Technology Engineering > >> > >> (e) chris.howarth@xxxxxxxx > >> > >> (t) +44 (0) 20 7508 3848 > >> > >> (f) +44 (0) 20 7508 0964 > >> > >> (mail-drop) CGC-06-3A > >> > >> > >> > >> > >> _______________________________________________ > >> ceph-users mailing list > >> ceph-users@xxxxxxxxxxxxxx > >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >> > > > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > -- John Wilkins Senior Technical Writer Intank john.wilkins@xxxxxxxxxxx (415) 425-9599 http://inktank.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |