-Greg
On Tuesday, July 2, 2013, Shain Miley wrote:
On Tuesday, July 2, 2013, Shain Miley wrote:
Hello,
I am using Ubuntu 13.04 with the testing branch (0.65-1) of ceph.
I have had no problem at all setting up a 3 node cluster and I currently have several vm's booting off of rbd as a test.
Last night I decided to try and setup radosgw along with it, using the following docs:
https://github.com/ceph/ceph/blob/master/doc/radosgw/config.rst
Everything seems to work fine until I reach the following step:
root@ceph1:/etc/ceph# ceph -k /etc/ceph/ceph.keyring auth add client.radosgw.gateway -i /etc/ceph/keyring.radosgw.gateway
2013-07-02 11:49:22.077343 7f3fbaf5c700 -1 monclient(hunting): ERROR: missing keyring, cannot use cephx for authentication
2013-07-02 11:49:22.077343 7f3fbaf5c700 0 librados: client.admin initialization error (2) No such file or directory
Error connecting to cluster: ObjectNotFound
root@ceph1:/etc/ceph# ceph auth list
installed auth entries:
osd.0
key: AQBx4NFRQNTHABAAsz0v2oM8a0T1H5aDL5LfCA==
caps: [mon] allow rwx
caps: [osd] allow *
osd.1
key: AQB44NFRwPfMNBAAylY3lHVw53XkGyorMKuhAg==
caps: [mon] allow rwx
caps: [osd] allow *
osd.2
key: AQCA4NFR8AK3ChAAI96tg6E4OY8rV0jHrOiw8Q==
caps: [mon] allow rwx
caps: [osd] allow *
client.admin
key: AQA33tFRYBMwORAAOFvOvMJakZk1FGbXspSJwA==
caps: [mds] allow
caps: [mon] allow *
caps: [osd] allow *
client.bootstrap-mds
key: AQA43tFR2IIBFxAAbLri8LaSunGw6LX22CODxw==
caps: [mon] allow profile bootstrap-mds
client.bootstrap-osd
key: AQA43tFRgNk8ChAA3uMc0AJsBWuQgoGVYYBtcA==
caps: [mon] allow profile bootstrap-osd
root@ceph1:/etc/ceph# ls
ceph.client.admin.keyring ceph.conf keyring.radosgw.gateway
root@ceph1:/etc/ceph# cat keyring.radosgw.gateway
[client.radosgw.gateway]
key = AQCR79JRwO77IhAAUEs8J3OgbzNlk/lJPX8mHg==
caps mon = "allow r"
caps osd = "allow rwx"
I have no problem communicating with the cluster as whole:
root@ceph1:/etc/ceph# ceph -s
cluster 299615fb-765a-4225-ab83-97719549eb4d
health HEALTH_OK
monmap e1: 3 mons at {ceph1=172.31.2.101:6789/0,ceph2=172.31.2.102:6789/0,ceph3=172.31.2.103:6789/0}, election epoch 8, quorum 0,1,2 ceph1,ceph2,ceph3
osdmap e25: 3 osds: 3 up, 3 in
pgmap v880: 390 pgs: 390 active+clean; 9336 MB data, 18632 MB used, 362 GB / 380 GB avail
mdsmap e1: 0/0/1 up
Is there any issue with me trying to test radosgw on a node that is already being used as a mon and an osd?
I may end up dropping back to the stable release...however I wanted to send a quick email in case there was an easy fix...or this was a bug of some sort.
Thanks in advance,
Shain
Shain Miley | Manager of Systems and Infrastructure, Digital Media | smiley@xxxxxxx | 202.513.3649
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Software Engineer #42 @ http://inktank.com | http://ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
