Good day!
We use balancing such way
varnish frontend-->radosgw1
|
->radosgw2
Every radosgw host use his own config so not necessary to add both nodes in every ceph.conf. It looks like
Host1
[client.radosgw.gateway]
host = myhost1
...
Host2
[client.radosgw.gateway]
host = myhost2
...
Pools, users, etc are internal params so every radosgw installation share this without any problem. And shares concurrently so you can do atomic writes and other good things. You could also use monit to monitor service health and even try to repair it automatically.
Regards, Artem Silenkov, 2GIS TM.
---
2GIS LLC
cell:+79231534853
2013/6/21 Alvaro Izquierdo Jimeno <aizquierdo@xxxxxxxx>
Hi,
I have a ceph cluster with a radosgw running. The radosgw part in ceph.conf is:
[client.radosgw.gateway]
host = myhost1
……..
But if the process radosgw dies for some reason, we lose this behavior…So:
-Can I setup another radosgw in other host sharing pools, users…. in ceph?
i.e.:
[client.radosgw.gateway2]
host = myhost2
……..
-If previous question is ‘yes’, Is there any load balancer in the radosgw configure options?
Thank you so much in advanced and best regards,
Álvaro.
____________
Verificada la ausencia de virus por G Data AntiVirus Versión: AVA 22.10538 del 21.06.2013 Noticias de virus: www.antiviruslab.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
