Ok. It's more like this: sudo initctl list | grep ceph This lists all your ceph scripts and their state. To start the cluster: sudo start ceph-all To stop the cluster: sudo stop ceph-all You can also do the same with all OSDs, MDSs, etc. I'll write it up and check it in. On Wed, Jun 5, 2013 at 3:16 PM, John Wilkins <john.wilkins@xxxxxxxxxxx> wrote: > Alvaro, > > I ran into this too. Clusters running with ceph-deploy now use upstart. > >> start ceph >> stop ceph > > Should work. I'm testing and will update the docs shortly. > > On Wed, Jun 5, 2013 at 7:41 AM, Alvaro Izquierdo Jimeno > <aizquierdo@xxxxxxxx> wrote: >> Hi all, >> >> >> >> I already installed Ceph Bobtail in centos machines and it’s run perfectly. >> >> >> >> But now I have to install Ceph Cuttlefish over Redhat 6.4. I have two >> machines (until the moment). We can assume the hostnames IP1 and IP2 ;). I >> want (just to test) two monitors (one per host) and two osds (one per host). >> >> In both machines, I have a XFS logical volume: >> >> Disk /dev/mapper/lvceph: X GB, Y bytes >> >> The logical volume is formatted with XFS (sudo mkfs.xfs -f -i size=2048 >> /dev/mapper/ lvceph) and mounted >> >> In /etc/fstab I have: >> >> /dev/mapper/lvceph /ceph xfs >> defaults,inode64,noatime 0 2 >> >> >> >> After use ceph-deploy to install (ceph-deploy install --stable cuttlefish >> IP1 IP2), create (ceph-deploy new IP1 IP2) and add two monitors (ceph-deploy >> --overwrite-conf mon create IP1 y ceph-deploy --overwrite-conf mon create >> IP2), I want to add the two osds >> >> >> >> ceph-deploy osd prepare IP1:/ceph >> >> ceph-deploy osd activate IP1:/ceph >> >> ceph-deploy osd prepare IP2:/ceph >> >> ceph-deploy osd activate IP2:/ceph >> >> >> >> >> >> But no one osd is up (neither in) >> >> #sudo ceph -d osd stat >> >> e3: 2 osds: 0 up, 0 in >> >> #sudo ceph osd tree >> >> # id weight type name up/down reweight >> >> -1 0 root default >> >> 0 0 osd.0 down 0 >> >> 1 0 osd.1 down 0 >> >> >> >> I tried to start both osds: >> >> #sudo /etc/init.d/ceph -a start osd.0 >> >> /etc/init.d/ceph: osd.0 not found (/etc/ceph/ceph.conf defines , >> /var/lib/ceph defines ) >> >> >> >> I suppose I have something wrong in the ceph-deploy osd prepare or activate >> but, can anybody help me to find it? >> >> Is needed to add anything more to /etc/ceph/ceph.conf? >> >> Now it looks like: >> >> [global] >> >> filestore_xattr_use_omap = true >> >> mon_host = the_ip_of_IP1, the_ip_of_IP2 >> >> osd_journal_size = 1024 >> >> mon_initial_members = IP1,IP2 >> >> auth_supported = cephx >> >> fsid = 43501eb5-e8cf-4f89-a4e2-3c93ab1d9cc5 >> >> >> >> >> >> Thanks in advanced and best regards, >> >> Álvaro >> >> >> >> >> >> >> >> >> >> >> >> >> ____________ >> Verificada la ausencia de virus por G Data AntiVirus Versión: AVA 22.10143 >> del 05.06.2013 Noticias de virus: www.antiviruslab.com >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@xxxxxxxxxxxxxx >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> > > > > -- > John Wilkins > Senior Technical Writer > Intank > john.wilkins@xxxxxxxxxxx > (415) 425-9599 > http://inktank.com -- John Wilkins Senior Technical Writer Intank john.wilkins@xxxxxxxxxxx (415) 425-9599 http://inktank.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |