Thanks for the suggestion. I tried adding shortnames to /etc/hosts (I already have DNS setup), but gatherkeys still fails.
I really want to use ceph for my cinder backend, and also for my glance, but if I can't deploy it, I won't use it.
On Fri, May 24, 2013 at 10:06 AM, Roman Dilken <rdilken@xxxxxx> wrote:
Hello,
I'm also new and I played yesterday with ceph-deploy.
The error ocurred also to me which I could resolve putting all short
servernames with their IPs in /etc/hosts on all nodes.
A second error occured deploying OSDs with ceph-deploy osd...
I resolved this in three steps:
1. I used ceph-deploy osd prepare /dev/xvdb
2. I mounted the prepared disk and corrected the symlink journal which
pointed to a non-reachable path to /dev/xvdb2 on every osd-node
3. ceph-deplay osd acivate /dev/xvdb1 worked finally (the partition is
necessary becaus cheph-deploy creates two partitions: 1 for the osd and
1 for the journal.
Greetings,
Roman
Am 24.05.2013 18:56, schrieb Abel Lopez:
> Hello all,> 192.168.112.82:6789/0 <http://192.168.112.82:6789/0> pipe(0x2fe7640 sd=3
> New to the list.
>
> I'm trying to form a repeatable deployment method for our environments.
>
> Using Ubuntu 12.04, and trying to install Cuttlefish.
> We have an existing chef setup for deploying openstack, so the
> ceph-cookbook sounded like an obvious choice. After following the
> instructions in the readme and the wiki, I see errors when chef-client runs
>
> [2013-05-24T16:41:31+00:00] INFO: Processing ruby_block[get
> osd-bootstrap keyring] action create (ceph::mon line 96)
>
> When I take a look at the command in this block, I get these errors
>
> ceph auth get-key client.bootstrap-osd
> 2013-05-24 16:42:10.325822 7f0f8e8e6700 0 -- :/17103 >>
> :0 s=1 pgs=0 cs=0 l=1).fault> <http://192.168.112.82:6789/0> pipe(0x7f0f84001d50 sd=3 :0 s=1 pgs=0
> 2013-05-24 16:42:16.326438 7f0f8e7e5700 0 -- 192.168.112.82:0/17103
> cs=0 l=1).fault
>
> So, I tried ceph-deploy, which gives me a whole different set of errors
> ceph-deploy new is fine, mon create is fine, but gatherkeys fails
> ceph-deploy gatherkeys s7r2 s8r2 s9r2
> Unable to find /etc/ceph/ceph.client.admin.keyring on ['s7r2', 's8r2',
> 's9r2']
> Unable to find /var/lib/ceph/bootstrap-osd/ceph.keyring on ['s7r2',
> 's8r2', 's9r2']
> Unable to find /var/lib/ceph/bootstrap-mds/ceph.keyring on ['s7r2',
> 's8r2', 's9r2']
>
> I googled around and found this
> http://tracker.ceph.com/issues/4924
> It says it's resolved, but I couldn't find the branch mentioned in github.
>
> As a new user, trying to build production environments reliably, I'm
> seeing a lot of barriers.
> What other methods do people use?
>
>
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
