|
Hello, I think this is a newbe question but I tested everything and, yes I FTFM as best I could. I’m evaluating ceph and so I setup a cluster of 4 nodes. The nodes are KVM virtual machines named ceph01 to ceph04 all running Ubuntu 12.04.2 LTS each with a single osd named osd.1 though osd.4 respective to the host they were running
on. Each host also has a 1TB disk for ceph to use ‘/dev/vdb1’. After some work I was able to get the cluster up and running and even mounted it on a test client host (named ceph00). I ran into issues when I was testing a failure. I shut off ceph02 and watched via (ceph –w) it recover and move the
data around. At this point all is fine. When I turned the host back on, it did not auto reconnect. I expected this. I then send through many attempts to re add it but all failed. Here is an output from: ceph osd tree # id weight type name up/down reweight -1 4 root default -3 4 rack unknownrack -2 1 host ceph01 1 1 osd.1 up 1 -4 1 host ceph02 2 1 osd.2 down 0 -5 1 host ceph03 3 1 osd.3 up 1 -6 1 host ceph04 4 1 osd.4 up 1 -7 0 rack unkownrack ceph -s health HEALTH_WARN 208 pgs peering; 208 pgs stuck inactive; 208 pgs stuck unclean; 1/4 in osds are down monmap e1: 1 mons at {a=10.30.20.81:6789/0}, election epoch 1, quorum 0 a osdmap e172: 4 osds: 3 up, 4 in pgmap v1970: 960 pgs: 752 active+clean, 208 peering; 5917 MB data, 61702 MB used, 2854 GB / 3068 GB avail mdsmap e39: 1/1/1 up {0=a=up:active} While I’m able to get it to be in the ‘in’ state, I cant seem to bring it up. Any ideas on how to fix this? Thanks, Glen Aidukas [Manager IT Infrasctructure] |
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
