On 2019/11/26 1:22, Jeff Layton wrote:
On Mon, 2019-11-25 at 21:50 +0800, Xiubo Li wrote:
On 2019/11/25 21:27, Jeff Layton wrote:
On Mon, 2019-11-25 at 06:08 -0500, xiubli@xxxxxxxxxx wrote:
From: Xiubo Li <xiubli@xxxxxxxxxx>
In case the max_mds > 1 in MDS cluster and there is no any standby
MDS and all the max_mds MDSs are in up:active state, if one of the
up:active MDSs is dead, the m->m_num_laggy in kclient will be 1.
Then the mount will fail without considering other healthy MDSs.
There manybe some MDSs still "in" the cluster but not in up:active
state, we will ignore them. Only when all the up:active MDSs in
the cluster are laggy will treat the cluster as not be available.
In case decreasing the max_mds, the cluster will not stop the extra
up:active MDSs immediately and there will be a latency. During it
the up:active MDS number will be larger than the max_mds, so later
the m_info memories will 100% be reallocated.
Here will pick out the up:active MDSs as the m_num_mds and allocate
the needed memories once.
Signed-off-by: Xiubo Li <xiubli@xxxxxxxxxx>
---
fs/ceph/mdsmap.c | 32 ++++++++++----------------------
include/linux/ceph/mdsmap.h | 5 +++--
2 files changed, 13 insertions(+), 24 deletions(-)
diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
index 471bac335fae..cc9ec959fe46 100644
--- a/fs/ceph/mdsmap.c
+++ b/fs/ceph/mdsmap.c
@@ -138,14 +138,21 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end)
m->m_session_autoclose = ceph_decode_32(p);
m->m_max_file_size = ceph_decode_64(p);
m->m_max_mds = ceph_decode_32(p);
- m->m_num_mds = m->m_max_mds;
+
+ /*
+ * pick out the active nodes as the m_num_mds, the m_num_mds
+ * maybe larger than m_max_mds when decreasing the max_mds in
+ * cluster side, in other case it should less than or equal
+ * to m_max_mds.
+ */
+ m->m_num_mds = n = ceph_decode_32(p);
+ m->m_num_active_mds = m->m_num_mds;
m->m_info = kcalloc(m->m_num_mds, sizeof(*m->m_info), GFP_NOFS);
if (!m->m_info)
goto nomem;
/* pick out active nodes from mds_info (state > 0) */
- n = ceph_decode_32(p);
for (i = 0; i < n; i++) {
u64 global_id;
u32 namelen;
@@ -218,17 +225,6 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end)
if (mds < 0 || state <= 0)
continue;
- if (mds >= m->m_num_mds) {
- int new_num = max(mds + 1, m->m_num_mds * 2);
- void *new_m_info = krealloc(m->m_info,
- new_num * sizeof(*m->m_info),
- GFP_NOFS | __GFP_ZERO);
- if (!new_m_info)
- goto nomem;
- m->m_info = new_m_info;
- m->m_num_mds = new_num;
- }
-
I don't think we want to get rid of this bit. What happens if the number
of MDS' increases after the mount occurs?
Every time when we receive a new version of mdsmap, the old whole
mdsc->mdsmap memory will be reallocated and replaced, no matter the MDS'
increases or decreases.
The active nodes from mds_info above will help record the actual MDS
number and then we decode it into "m_num_active_mds". If we are
decreasing the max_mds in the cluster side, the "m_num_active_mds" will
very probably be larger than the expected "m_num_mds", then we
definitely will need to reallocate the memory for m->m_info here. Why
not allocate enough memory beforehand ?
BTW, from my investigation that the mds number decoded from the mds_info
won't be larger than the "m_num_active_mds". If I am right then this
code is useless here, or we need it.
It shouldn't be larger than that, but...the "mds" value is decoded from
the map and gets treated as an index into the m_info array. If that
value ends up being larger than the array you initially allocated, then
we're looking at a buffer overrun.
I don't think we should trust the consistency of the info in the map to
that degree, so we either need to keep something like the reallocation
in place, or add some sanity checks to make sure that that possibility
is handled sanely.
Okay, then let keep this code to do the sanity check.
info = &m->m_info[mds];
info->global_id = global_id;
info->state = state;
@@ -247,14 +243,6 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end)
info->export_targets = NULL;
}
}
- if (m->m_num_mds > m->m_max_mds) {
- /* find max up mds */
- for (i = m->m_num_mds; i >= m->m_max_mds; i--) {
- if (i == 0 || m->m_info[i-1].state > 0)
- break;
- }
- m->m_num_mds = i;
- }
/* pg_pools */
ceph_decode_32_safe(p, end, n, bad);
@@ -396,7 +384,7 @@ bool ceph_mdsmap_is_cluster_available(struct ceph_mdsmap *m)
return false;
if (m->m_damaged)
return false;
- if (m->m_num_laggy > 0)
+ if (m->m_num_laggy == m->m_num_active_mds)
return false;
for (i = 0; i < m->m_num_mds; i++) {
if (m->m_info[i].state == CEPH_MDS_STATE_ACTIVE)
diff --git a/include/linux/ceph/mdsmap.h b/include/linux/ceph/mdsmap.h
index 0067d767c9ae..3a66f4f926ce 100644
--- a/include/linux/ceph/mdsmap.h
+++ b/include/linux/ceph/mdsmap.h
@@ -25,8 +25,9 @@ struct ceph_mdsmap {
u32 m_session_timeout; /* seconds */
u32 m_session_autoclose; /* seconds */
u64 m_max_file_size;
- u32 m_max_mds; /* size of m_addr, m_state arrays */
- int m_num_mds;
+ u32 m_max_mds; /* expected up:active mds number */
+ int m_num_active_mds; /* actual up:active mds number */
+ int m_num_mds; /* size of m_info array */
struct ceph_mds_info *m_info;
/* which object pools file data can be stored in */
